CliniEco Eye Wash Station — Wall-Mount Emergency Rinse — main image

CliniEco Eye Wash Station — Wall-Mount Emergency Rinse

SKU CLI-EWS-WM · CliniEco Medical
$59.99
In stock · ships from Toronto, ON
CLI-EWS-WMsku
Wound Carecategory
CliniEco Medicalbrand
In stockavailability
Pack sizeSingle configuration Single configuration
Health Canada licensed importer & distributor · MDEL #35334 · Ships from Toronto
Free shipping over $99 in Ontario · $199 rest of Canada

Specifications

SKUCLI-EWS-WM
BrandCliniEco Medical
CategoryWound Care
AvailabilityIn stock
Ships fromToronto, ON

Pricing

OrderUnit price
1 unit$59.99 CAD
Case and carton prices are in the size table below
Request quote for clinic and volume orders
Volume pricing is quoted per order — most quotes go out within one business day.
Read the full product guide 11 sections · specs, use, compliance

CliniEco Eye Wash Station — Wall-Mount Emergency Rinse

CliniEco Eye Wash Station — Wall-Mount Emergency Rinse

What is a wall-mounted eye wash station for?

It is a rinse point fixed where a splash can happen, so rinsing starts in the first seconds after a chemical or particulate exposure rather than after a walk to the nearest sink. The delay is the injury, which is why the mount matters: a station at the bench or workshop wall gets used, and one in a corridor gets remembered afterwards. It is an emergency-rinse accessory, not a sterile single-use device, and it does not replace a plumbed emergency shower where your workplace assessment calls for one.

Where should it be mounted, and how high?

Within a few steps of the hazard and on the path out of the room, not behind a door, a bench or a parked cart. Set it at eye height for the shortest regular user so the rinse can be started without reaching up, and keep the floor in front of it clear enough that someone with a contaminated face can stand there with both hands free. Where an area has two hazard points — a bench line and a storage room, say — one unit per point beats one central unit every time.

Does the station come with rinse solution?

The listing does not state whether a bottle and solution are included, and where a detail is not sourced it is not claimed here. Confirm the contents with us before the unit goes into a first-aid plan, because a station without a rinse supply is a mounting bracket. Whether you feed it from single-use saline or from a plumbed supply is a separate decision from the station itself, and it belongs to whoever owns the first-aid assessment for that room.

Which standard applies, and does the listing quote one?

No standard number is quoted on this page, and that is deliberate. We publish what we can source — the mount format, the type of unit and the locations it is intended for — and the listing states outright that bottle volume, whether solution is included and any relevant standard are still being confirmed with the factory. If your safety programme or your insurer requires a specific standard reference before purchase, raise it before ordering rather than after installation, and we will tell you what the factory can document for this unit.

How does a wall station compare with a personal eyewash bottle?

A bottle travels with a worker and is opened in the field; a wall station is a fixed point that anyone can reach without carrying anything. Sites with a fixed hazard want the fixed point, and mobile or remote work wants both. After a rinse, the eye is usually covered while the patient is moved on, which is where sterile 12-ply gauze sponges, 200 per pack and hypoallergenic paper tape, 1 inch × 10 yards come in; a self-adherent elastic bandage wrap holds a dressing in place when the patient has to be walked out.

Wall-mount eye wash station: the specification as listed
Property Value
Mount Wall-mounted, at the point of use
Type Emergency eye wash / rinse station
For Emergency rinsing after chemical or particulate exposure
Intended locations Laboratories, workshops, maintenance areas, schools, clinical and industrial first-aid points
Included contents Not stated on the listing — confirm bottle and solution before ordering
Standard reference None quoted — not sourced, so not published
Device class Emergency-rinse accessory; not a sterile single-use device
Availability In stock, ships within 1 business day from Toronto
Distribution CliniEco Medical, MDEL #35334

Site the station with the clinic supply planner, log the monthly rinse-and-check on the sheet from the compliance log centre, and put a first-aid or documentation question to the compliance desk. Multi-site employers that standardise their first-aid points order through our clinic ordering desk.

Imported and distributed in Canada by CliniEco Medical — MDEL #35334.

CliniEco Eye Wash Station is a wall-mounted emergency eye-rinse station for laboratories, workshops, clinics and schools. It is designed to be mounted at the point of use so an eye rinse can begin immediately after a splash or exposure.

Availability: In stock — ships within 1 business day from our Toronto warehouse.

Specifications

Mount Wall-mounted
Type Emergency eye wash / rinse station

Key features

  • Wall-mount format keeps the rinse at the point of use.
  • For emergency eye rinsing after chemical or particulate exposure.
  • Suits workplaces that need an eye-rinse point near hazards.

Where it is used

Laboratories, workshops and maintenance areas, schools, and clinical and industrial first-aid points.

Quality and documentation

This is an emergency-rinse accessory, not a sterile single-use device. We are confirming the bottle volume, whether rinse solution is included, and any relevant standards with the factory, and will publish those details here once confirmed. We will not quote a standard number we cannot source.

CliniEco Medical · Imported and distributed in Canada by Ecology Source New Energy Technology Co., LTD. · Health Canada MDEL #35334

Related articles

Common questions

What mounting surface and fixings does the station need?

The listing states the wall-mount format but does not publish a fixing kit or a wall-type rating, so confirm both before the install date. It belongs at eye height for the shortest regular user and clear of door swings, benches and parked carts, because a station that is blocked gets used late or not at all.

What routine check keeps the station ready between inspections?

Log a monthly rinse-and-check on the sheet from the compliance log centre: confirm the rinse supply is present and in date, the cap and outlet are clean, the floor in front of the unit is clear, and the unit is still where the plan says it is. Record the date and the initials — a check nobody can read back is the same as no check.

We have an inspection coming up — what is the lead time?

The station is listed as in stock and shipping within one business day from Toronto, against a first-aid plan that may need it sooner than a made-to-order item would allow. Confirm stock at the time you order, and put the contents question in the same message, since the rinse supply is what makes the mount usable.

What should be posted next to the station for staff?

A short local procedure: where the station is, how to start the rinse, who checks it, where the log lives, and who to call after an exposure. It sits with the first-aid assessment for the room rather than with the product, and a documentation or policy question goes to the compliance desk rather than to a technician.

What do we do when the rinse supply is past its date or the unit is damaged?

Replace the supply rather than topping it up, and take a damaged unit out of service until it is repaired or replaced — a station that is present but unusable reads as compliant on a walk-through and fails the person who needs it. Note the replacement in the same log so the history stays continuous.