Six documents decide whether a 95 kPa specimen bag may be used in a Canadian clinic, and only one of them is called a regulation about bags. The rest arrive sideways: a national standard of Canada reached through a section of the transport regulations, a packing instruction that applies when the specimen flies, a World Health Organization guidance document that explains the intent, laboratory safety and quality standards that govern the room, and the medical device regulations that govern the container inside rather than the bag outside.
The bag in question is the UN3373 specimen transport bag sold in 6×9, 7×11, 8×10 and 12×15 inch formats; the container inside it is typically a 90 mL graduated specimen cup. Getting the map right matters because a clinic that cites the wrong document in its procedure is not merely imprecise — it is unable to answer the question the standard actually asks.
Which standards apply to a 95 kPa specimen bag in Canada?
Five standards and one statute, each covering a different part of the object or the journey. The table maps them to the claim each one can and cannot support, which is the distinction buyers find useful when a supplier sends a certificate with no context.
| Document | What it fixes | Which part of the bag it governs | What it does not prove |
|---|---|---|---|
| Transportation of Dangerous Goods Regulations, SOR/2001-286 | Classification, marking, means of containment, training | The completed package and the shipper's duties | It contains no pressure figure; a full-text search returns no "95 kPa" |
| CAN/CGSB-43.125-2021 | Design, manufacturing, marking, selection and use for Category A and B packaging | The bag as a Type P650 means of containment | It is not a certificate for a specific batch |
| UN Packing Instruction P650 | The international packing instruction for Category B | The tests: pressure differential, drop, absorbency | It is not Canadian law in itself |
| IATA Dangerous Goods Regulations, packing instruction 650 | The same instruction as applied by air carriers | Air transport acceptance | It says nothing about ground carriage |
| WHO guidance on the transport of infectious substances, 2023–2024 | Interpretation and practice across all modes | The procedure behind the marking | It is guidance, not a binding instrument |
| Medical Devices Regulations, SOR/98-282 | What a device is, how it is licensed and labelled | The specimen container, not the bag | A licence for a bag, because packaging is not a device |
The fourth row is where the bag's own printed wording comes from. Canadian law does not certify a bag; s. 5.16(1) of the TDG Regulations requires Category A and Category B substances to be in a means of containment manufactured, selected and used in accordance with CAN/CGSB-43.125, and the definition of a Type P650 container in s. 1.4 allows a container manufactured outside Canada to comply with packing instruction P650 of the UN Recommendations instead.
Where does the 95 kPa number actually come from?
It comes from the packing instruction, and it is adopted into Canadian practice through the standard rather than written into the regulations. That is verifiable rather than rhetorical: the consolidated TDG Regulations contain no occurrence of the string "95 kPa", checked by full-text search on 11 November 2026. What the Regulations contain is the routing rule in s. 5.16(1) and the definition in s. 1.4 that makes a Type P650 container a container complying with CAN/CGSB-43.125.
The Canadian General Standards Board publishes the document and a free copy of the edition in force is available from Government of Canada Publications, which matters because a clinic can then read the clause rather than a summary of it (cgsb.ca, publications.gc.ca, both checked 11 November 2026).
The Transport Canada page for the standard confirms the edition in force, CAN/CGSB-43.125-2021, published November 2021, replacing the 2016 edition, with a scope covering design, manufacturing, marking, selection and use for Category A and Category B packaging and for clinical, biomedical or regulated medical waste. A free copy is available from Government of Canada Publications, which is worth knowing: a clinic can hold the standard rather than a supplier's summary of it.
The stateside comparison is instructive. 49 CFR 173.199(b) writes the performance figure into the regulation itself: the primary or secondary packaging must withstand, without leakage, an internal pressure differential of 95 kPa, absorbent material must be able to take the entire contents, and liquids are capped at 1 L per primary receptacle and 4 L per outer packaging for aircraft. A Canadian buyer who asks "where is 95 kPa in the law" gets a standard reference. An American buyer gets a citation.
Is a specimen bag a medical device in Canada?
No, and the distinction saves a clinic from asking for the wrong paperwork. The Medical Devices Regulations govern devices; a transport bag is packaging, which is why no medical device licence number is issued for it. The container that goes inside the bag sits on the other side of that line, and the American classification shows how far the two sides are apart: the FDA lists "Container, Specimen, Non-Sterile" under product code NNI and "Container, Specimen, Sterile" under product code FMH, both Class I and both assigned to 21 CFR 864.3250 with a submission type that indicates exemption.
The Canadian reasoning lands in a different place. Under Schedule 1 to the Medical Devices Regulations, a non-invasive device that stores a body fluid for examination is not captured by the rule that governs channelling or storing liquids for introduction into the body, so the residual non-invasive rule applies and the manufacturer's file should show which rule was applied. That is a classification argument, not a licence for the bag, and the two questions should never be merged in a procurement document.
Which standard governs the bag when the specimen travels by air?
Packing instruction 650 as applied by the carrier, which is the same instruction in substance and a different acceptance regime in practice. IATA publishes the Dangerous Goods Regulations that carriers work from, and the pressure differential, absorbent capacity and drop performance sit in the packing instruction the airline applies. Transport Canada handles the air mode in Part 12 of the TDG Regulations, and the WHO guidance explains how the three-layer system is meant to behave across modes.
A laboratory's preanalytical procedure sits one layer down again: CLSI document PRE04 covers the handling, transport, processing and storage of blood specimens for routine laboratory examinations (clsi.org, checked 11 November 2026).
The practical consequence for a clinic is that a bag selected for ground courier work is not automatically the bag for an air shipment, even when the same bag is printed 95 kPa. Section 5.1.1(1) of the TDG Regulations is the sentence behind that: a person must not offer for transport, handle or transport dangerous goods in a means of containment unless the means of containment is required or permitted by Part 5 to be used for those goods. Selection is a duty, not a preference.
Which standards apply to the laboratory rather than the bag?
Two, and they are often confused with the packaging rules because both concern safety. ISO 15190:2020 sets requirements for safe practices in the medical laboratory, published February 2020 and currently marked as a standard to be revised, and ISO 15189:2022 sets requirements for quality and competence in medical laboratories, published December 2022. Neither one specifies a bag. Both require the laboratory to have a controlled procedure for the specimens it receives, which is where the bag's selection and use actually lives.
Where sterilized packaging is involved rather than specimen transport, ISO 11607-1:2019 is the packaging document, covering the packaging system for terminally sterilized medical devices. A clinic that handles both will find the two standards sitting in different folders and answering different questions.
How does the Canadian standard stack differ between Canada and the United States?
The layers are similar in name and different in binding force, which is the part that changes what a clinic keeps on file.
| Layer | Canada | United States |
|---|---|---|
| Transport regulation | TDG Regulations, SOR/2001-286 | 49 CFR Parts 171 to 180 |
| Packaging requirement | CAN/CGSB-43.125-2021, reached through s. 5.16(1) | 49 CFR 173.199, self-contained |
| Where 95 kPa appears | In the national standard, not the regulation text | In the regulation text |
| Air instruction | IATA packing instruction 650 applied under TDG Part 12 | IATA and ICAO Technical Instructions under 49 CFR Part 171 |
| Container classification | Schedule 1 rules, residual non-invasive rule for the container | Product code NNI or FMH, Class I, 21 CFR 864.3250, exempt |
| Documentation owed to the buyer | Packaging information under clause 4.4 of the standard, at first purchase | Filling and closing instructions, retained at least one year |
The bottom row is the one to carry into a purchasing conversation. In Canada the obligation to hand over packaging information is written into s. 5.16(2) of the regulations and refers to a clause of the standard. In the United States the obligation is a retention rule on the manufacturer and distributor. Both mean the same thing at the bench: the instructions exist and can be produced.
Is the same bag compliant in Canada and the United States?
The bag can be, and the file cannot. A 95 kPa bag that passes a drop test and holds the pressure differential meets the performance element in both countries, because both derive the performance from the same UN packing instruction. What differs is everything around it: the mark used instead of the Class 6.2 label under s. 4.22.1, the 24-hour telephone number required next to the shipping name under s. 1.39(c), the training certificate under s. 6.1(1), and, in Quebec, a French inscription that neither federal instrument asks for.
That is the argument for keeping the standard reference on the purchase order. A specification sheet that says "UN3373 compliant" describes an intention; a specification sheet that names the standard, its edition year and the test report behind it describes an object.
What should a clinic's standards file contain?
Five items, in the order a reviewer reaches for them. The TDG Regulations section numbers that apply, so the procedure can point at something. The standard reference with its year, CAN/CGSB-43.125-2021. The test report with a number and a result. The packaging information delivered at first purchase. And the edition dates, because a file citing the 2016 edition of the standard is citing a document that has been replaced.
The compliance log centre holds the printable logs that keep a transport record and a stock count on one page, and the planner on the same page turns a weekly specimen count into a reorder point. For a standing order across several sites, the route is the institutional account enquiry page; where specimen transport sits inside the same procedure as a clinic's reprocessing records, the sterilization compliance consultation covers that side. Reselling? become a distributor.
CliniEco Medical distributes clinic consumables in Canada under MDEL #35334. This article describes requirements published by Transport Canada, the World Health Organization and the United States federal register; the requirement that binds a specific clinic remains the one in its provincial guidance, its accreditation conditions and its own written procedure.
References
- Transportation of Dangerous Goods Regulations, SOR/2001-286, ss. 1.4, 1.39, 1.42, 4.22.1, 5.1.1, 5.16, 6.1 — laws-lois.justice.gc.ca (read 11 November 2026)
- CAN/CGSB-43.125, standard in force 2021 — tc.canada.ca (checked 11 November 2026)
- Packaging for infectious substances — tc.canada.ca (checked 11 November 2026)
- Medical Devices Regulations, SOR/98-282, Schedule 1 and ss. 21 to 23 — laws-lois.justice.gc.ca (read 11 November 2026)
- 49 CFR 173.199, Category B infectious substances — law.cornell.edu (checked 11 November 2026)
- FDA device classification, product codes NNI and FMH, 21 CFR 864.3250 — open.fda.gov (queried 11 November 2026)
- 21 CFR 864.3250, specimen container — ecfr.gov (checked 11 November 2026)
- Guidance on regulations for the transport of infectious substances, 2023–2024 — who.int (checked 11 November 2026)
- Dangerous Goods Regulations, packing instruction 650 — iata.org (checked 11 November 2026)
- ISO 15190:2020, requirements for safety — genorma.com (checked 11 November 2026)
- ISO 15189:2022, requirements for quality and competence — genorma.com (checked 11 November 2026)
- ISO 11607-1:2019, packaging for terminally sterilized devices — genorma.com (checked 11 November 2026)
- Medical devices portal — canada.ca (checked 11 November 2026)
- 42 CFR 493.1242, specimen submission, handling and referral — law.cornell.edu (checked 11 November 2026)
- Routine practices and additional precautions — publichealthontario.ca (checked 11 November 2026)
- Biological hazards — ccohs.ca (checked 11 November 2026)
- Standard precautions for healthcare personnel — cdc.gov (checked 11 November 2026)
- Occupational Health and Safety Act, R.S.O. 1990, c. O.1, s. 25(2)(h) — ontario.ca (checked 11 November 2026)
- Canadian General Standards Board, publisher of the CAN/CGSB series — cgsb.ca (checked 11 November 2026)
- Government of Canada Publications, free copy of CAN/CGSB-43.125 — publications.gc.ca (checked 11 November 2026)
- CLSI PRE04, handling, transport, processing and storage of blood specimens — clsi.org (checked 11 November 2026)
Related reading
- UN3373 Category B packaging explained: IATA PI 650, 95 kPa and what inspectors look for
- Specimen transport packaging in Canada vs the US: which 95 kPa rules apply
- What does 95 kPa mean on a specimen transport bag?
- Specimen bag seal ratings: the 95kPa standard for Canadian labs
- Which standards apply to 95 kPa specimen bags in British Columbia clinics
Frequently asked questions
Which standards apply to a 95 kPa specimen bag in Canada?
The Transportation of Dangerous Goods Regulations set the marking and containment duties, s. 5.16(1) points to CAN/CGSB-43.125-2021 for the packaging itself, and UN packing instruction P650 supplies the pressure and drop criteria that the standard adopts. Air carriage adds IATA packing instruction 650, and WHO guidance explains the practice. The Medical Devices Regulations apply to the container inside, not to the bag.
Is 95 kPa a Canadian regulatory figure?
It is a performance figure from the UN packing instruction, adopted into Canadian practice through CAN/CGSB-43.125 rather than written into the TDG Regulations. A full-text search of the consolidated Regulations returns no occurrence of "95 kPa". The United States writes the same figure directly into 49 CFR 173.199(b).
Does a 95 kPa specimen bag need a medical device licence in Canada?
No. A transport bag is packaging, and the Medical Devices Regulations apply to devices. The specimen container inside the bag is the device, and its classification file should show which Schedule 1 rule the manufacturer applied for a non-invasive container that stores a body fluid for examination. In the United States the equivalent entries are product codes NNI and FMH under 21 CFR 864.3250, both Class I and exempt.
Which standard covers an air shipment of Category B specimens?
IATA packing instruction 650 as applied by the carrier, alongside the ICAO Technical Instructions, with Transport Canada's air provisions in Part 12 of the TDG Regulations. The performance criteria are the same instruction in substance; the acceptance regime and the documentation differ, which is why a bag selected for ground courier work should be re-checked before it flies.
What documentation does the supplier owe under the standard?
Under s. 5.16(2) of the TDG Regulations, where the packaging is supplied as a kit the manufacturer or distributor must provide the packaging information required under clause 4.4 of CAN/CGSB-43.125 at the initial purchase and to a packaging user on request. That is separate from, and additional to, the test report behind the pressure claim.
Do ISO 15189 and ISO 15190 cover the bag?
No. ISO 15189:2022 covers laboratory quality and competence, and ISO 15190:2020 covers safe practices in the laboratory. Neither specifies a packaging type. What they require is a controlled procedure for the specimens the laboratory receives, which is where bag selection and use sit.
Last updated: 11 November 2026.