A 95 kPa specimen bag is checked as a packaging claim, not as a purchase. The auditor is not asking whether the bag feels strong. The auditor is asking four things: what the 95 kPa figure was tested against, who holds the report, whether this specimen was in scope at all, and whether the person who closed the bag was trained and certified. A clinic that answers those four has a file. A clinic that answers "the supplier says so" has a bag.
The laboratory's own preanalytical procedure sits beside the transport rule: CLSI document PRE04 covers the handling, transport, processing and storage of blood specimens for routine laboratory examinations, and it is the document a laboratory writes its bench procedure against (see clsi.org, checked 11 November 2026).
The bag in daily use across Canadian collection rooms is the UN3373 specimen transport bag with the document pouch, supplied in 6×9, 7×11, 8×10 and 12×15 inch formats because the primary receptacle decides the size, not the other way round. Where the same round also collects urine and other liquid samples, the graduated 90 mL specimen cups are the container that goes inside it.
What does an auditor actually check on a 95 kPa specimen bag?
Five things, and each one has a legal home. The table below is the order an inspector usually works in, because it moves from the object to the paper.
| What is checked | Where the requirement comes from | What the file has to show |
|---|---|---|
| The 95 kPa claim is a tested result | TDG Regulations, s. 5.16(1), which sends Category A and B to CAN/CGSB-43.125 | A test report with a report number, a test method and a result, not a marketing line |
| The bag is selected and used, not just bought | CAN/CGSB-43.125-2021, scope: design, manufacturing, marking, selection and use | The supplier's packaging information, provided at first purchase and on request |
| The completed package carries the Category B mark | TDG Regulations, s. 4.22.1 and s. 1.39(b)(i)–(ii) | The mark plus the shipping name in letters at least 6 mm high |
| A 24-hour telephone number travels with it | TDG Regulations, s. 1.39(c) | A number that answers, displayed next to the shipping name |
| The person who packed it is trained | TDG Regulations, s. 6.1(1) and s. 6.3(1) | A signed training certificate with its expiry date and the topics covered |
The first row is where most files are thin. Canadian law does not certify a bag. It requires the bag to comply with a national standard, and the standard carries the tests. That distinction is the whole audit.
Does every specimen leaving a Canadian clinic need a 95 kPa bag?
No, and this is the finding that most often runs the other way. Section 1.42 of the Transportation of Dangerous Goods Regulations removes Parts 3 to 8 and Part 17 from human specimens where a competent professional has determined that there is a minimal likelihood that infectious substances are present. Paragraph 1.42(1.1) says what that determination has to weigh: the medical history, the symptoms, the relevant circumstances of the patient and the endemic local conditions.
The condition attached is not packaging performance. It is marking and containment. Subsection 1.42(2) requires the specimen to be in a means of containment marked "Exempt Human Specimen" or "spécimen humain exempté", designed, constructed, filled, closed, secured and maintained so that under normal conditions of transport there will be no release. A clinic that writes "95 kPa" on every bag in the cupboard without deciding which specimens are Category B has inverted the rule: the exempt declaration is the narrower, more specific statement, and it still has to be true.
What does the 95 kPa figure test, and who holds the report?
The number is an internal pressure differential the packaging has to hold without leaking. In the United States the criterion is written straight into the regulation: 49 CFR 173.199(b) requires the primary or the secondary packaging to withstand, without leakage, an internal pressure differential of 95 kPa, and it caps liquids at 1 L per primary receptacle and 4 L per outer packaging for aircraft. Canada reaches the same place by reference, which is why the number is not searchable in the TDG Regulations themselves — a full-text search of the consolidated Regulations returns no occurrence of "95 kPa" at all, checked 11 November 2026.
For the 6×9 inch format CliniEco supplies, the seal test summary lists report TJA20211102-0116, a differential pressure held for 30 minutes with no leakage, tested by the China Packaging Research & Test Center (Tianjin) with CNAS L0227 and CMA 180010260273 accreditation shown on the summary, and the method cited as IATA DGR 62nd edition with ICAO Doc 9284-AN/905. A buyer does not have to accept a summary page: the document exists, it has a report number, and asking for it is a normal part of a supplier file.
Which size covers 6×9 to 12×15 inches, and what has to be printed on it?
Four footprints are sold, and the size question is answered by the largest primary receptacle in the load rather than by the volume of the run. The absorbent layer is a separate decision, because absorbency is matched to the volume of the container, not to the bag.
| Format | Typical primary receptacle | What decides that it fits | What to check on the printed bag |
|---|---|---|---|
| 6×9 in (152 × 229 mm) | Blood tubes, single urine container, swab tube | Container lies flat with the absorbent layer against it, bag folds at the seal line | 95 kPa declaration, specimen transport wording, biohazard panel |
| 7×11 in | Two or three urine containers, sputum pot | The load must not stand proud of the fold line | Same, plus the closing instructions legible at the seal |
| 8×10 in | Multi-tube racks, cytology pot | A rack sits without forcing the closure | Same, plus a write-on zone that survives |
| 12×15 in | Histology pot, several containers to one lab | The bag closes without compressing the seal | Same, plus room for the requisition pouch |
Absorbent material is not a pad the buyer adds when convenient. In the United States the requirement is explicit in 49 CFR 173.199(b): absorbent material between the primary and the secondary, sufficient to absorb the entire contents. In Canada the same requirement arrives through the standard referenced by s. 5.16(1). The pad's stated capacity therefore has to be read against the largest primary volume in the bag, and a pad that cannot take that volume is a finding even when the bag itself is correct.
What must be displayed on the outside of a Category B package?
Section 1.39 of the TDG Regulations is the compact rule, and it is short enough to quote the structure of it. The exemption from Parts 3 and 4 and Part 17 applies only if one external surface of the means of containment measures at least 100 mm × 100 mm; if the means of containment complies with Part 5 and displays the Category B mark together with the shipping name on a contrasting background, in letters at least 6 mm high; and if the 24-hour telephone number required under paragraph 3.5(1)(j) is displayed next to the shipping name.
Section 4.22.1 adds the substitution that clinics miss: the Category B mark is displayed instead of the Class 6.2 label. Photographs of clinic shipments still show a Class 6.2 label taped to a box, which is the wrong mark for this category. Note also what is absent from the list: no shipping document is required for Category B, because Part 3 does not apply. The 24-hour number is not optional, though, and a number that rings out at 16:30 is the second most common finding after a missing report.
How does the packaging rule differ between Canada and the United States?
The comparison is not about the bag, which travels in both directions. It is about where the number lives, and that changes what a buyer can point at.
| Item | Canada | United States |
|---|---|---|
| Instrument that binds the shipper | Transportation of Dangerous Goods Regulations, SOR/2001-286 | 49 CFR Parts 171 to 180 |
| Where 95 kPa is written | In CAN/CGSB-43.125, reached through s. 5.16(1); not in the Regulations text | In the regulation itself, 49 CFR 173.199(b) |
| Mark instead of label | Category B mark under s. 4.22.1 | Square-on-point mark, letters at least 6 mm, diamond at least 50 mm |
| Training | Training certificate required by s. 6.1(1), contents in s. 6.3(1) | Hazmat employee training under 49 CFR 172.700 to 172.704 |
| Records kept | Packaging information supplied at first purchase, s. 5.16(2) | Filling and closing instructions retained at least one year, 49 CFR 173.199(a) |
The consequence for a clinic file is practical: a Canadian buyer cannot quote a subsection of the regulations for the pressure test, so the supplier's standard reference and the test report have to carry the claim. The same question put to an American supplier is answered by citing 173.199(b) directly.
What training record does the auditor ask for?
Section 6.1(1) prohibits a person from handling, offering for transport or transporting dangerous goods unless the person is adequately trained and holds a training certificate, or performs those activities in the presence and under the direct supervision of someone who is. Subsection 6.1(2) puts the same duty on the employer. Section 6.2 lists the knowledge areas, and paragraph 6.2(f) is the one that ties training back to this article: the compliance marks, safety requirements and safety standards in Part 5.
The certificate has to carry specific information under s. 6.3(1): the employer's name and address, the employee's name, the expiry date preceded by the words "Expires on" or "Date d'expiration", and the aspects of handling the employee is trained for. A certificate that says "specimen handling" without the Part 5 topics does not answer the question the auditor is asking.
How does the same bag fail the same way in Canada and the United States?
The failure modes are identical on both sides of the border, even though the paper differs. An undersized absorbent pad, a requisition sharing space with the specimen, a bag that sat folded in a drawer until the film creased at the seal, a Category B mark printed on the wrong surface, and a certificate that expired last year are the five recurring findings in both jurisdictions.
Where the countries differ is what the reviewer does with the finding. In the United States, 42 CFR 493.1242 requires the laboratory to have written policies for specimen labeling, storage, the conditions for specimen transportation and specimen acceptability, and to document the date and time it receives a specimen. In Canada, the equivalent record is provincial: a specimen collection centre in Ontario has to record the date and time of submission and the name and address of the laboratory, under R.R.O. 1990, Reg. 683, s. 4(2)(d) and (e). Same question — can you show when it left and where it went — asked through a different instrument.
What should be assembled before the auditor arrives?
One folder per supplier, in the order the questions arrive. The standard reference with the edition year, because CAN/CGSB-43.125-2021 replaced the 2016 edition. The test report with its number. The packaging information the supplier owes at first purchase under s. 5.16(2). The training certificates with expiry dates. And the procedure that decides which specimens are Category B and which are exempt human specimens, because that decision is made by a professional at the bench and signed nowhere unless the clinic writes it down.
The compliance log centre holds the printable logs that keep a change record and a stock count on one page, and the supply planner on the same page turns a weekly specimen count into a reorder point. For a standing order across several sites, the route is the institutional account enquiry page; where specimen transport sits inside the same procedure as a clinic's reprocessing records, the sterilization compliance consultation covers that side. Reselling? become a distributor.
CliniEco Medical distributes clinic consumables in Canada under MDEL #35334. This article describes requirements published by Transport Canada and the United States federal register; the requirement that binds a specific clinic remains the one in its provincial guidance, its accreditation conditions and its own written procedure.
References
- Transportation of Dangerous Goods Regulations, SOR/2001-286, ss. 1.39, 1.42, 4.22.1, 5.16, 6.1 to 6.3 — laws-lois.justice.gc.ca (full text read 11 November 2026)
- CAN/CGSB-43.125, Packaging of Category A and Category B infectious substances, edition in force 2021 — tc.canada.ca (checked 11 November 2026)
- Packaging for infectious substances — tc.canada.ca (checked 11 November 2026)
- 49 CFR 173.199, Category B infectious substances — law.cornell.edu (checked 11 November 2026)
- 42 CFR 493.1242, specimen submission, handling and referral — law.cornell.edu (checked 11 November 2026)
- Guidance on regulations for the transport of infectious substances, 2023–2024 — who.int (checked 11 November 2026)
- Dangerous Goods Regulations and packing instruction 650 — iata.org (checked 11 November 2026)
- ISO 15190:2020, medical laboratories, requirements for safety — genorma.com (checked 11 November 2026)
- ISO 15189:2022, medical laboratories, requirements for quality and competence — genorma.com (checked 11 November 2026)
- ISO 11607-1:2019, packaging for terminally sterilized medical devices — genorma.com (checked 11 November 2026)
- Medical devices portal — canada.ca (checked 11 November 2026)
- FDA device classification, specimen container product codes NNI and FMH, 21 CFR 864.3250 — open.fda.gov (queried 11 November 2026)
- 21 CFR 864.3250, specimen container — ecfr.gov (checked 11 November 2026)
- Occupational Health and Safety Act, R.S.O. 1990, c. O.1, s. 25(2)(h) — ontario.ca (checked 11 November 2026)
- R.R.O. 1990, Reg. 683, Specimen Collection Centres, s. 4(2) — ontario.ca (checked 11 November 2026)
- Routine practices and additional precautions — publichealthontario.ca (checked 11 November 2026)
- Biological hazards — ccohs.ca (checked 11 November 2026)
- Standard precautions for healthcare personnel — cdc.gov (checked 11 November 2026)
- CLSI PRE04, handling, transport, processing and storage of blood specimens — clsi.org (checked 11 November 2026)
- Government of Canada Publications, free copy of CAN/CGSB-43.125 — publications.gc.ca (checked 11 November 2026)
Related reading
- UN3373 Category B packaging explained: IATA PI 650, 95 kPa and what inspectors look for
- What auditors check about medical specimen transport bags in Canada clinics
- Specimen bag 95 kPa documentation: what Canadian labs require
- How are specimen bags pressure-tested? What 95 kPa certification means for labs
- Which specimen bag size fits your lab: 6x9, 7x11, 8x10 or 12x15?
Frequently asked questions
What does an auditor check on a 95 kPa specimen bag?
Four things. That the 95 kPa claim is a tested result with a report number, that the bag was selected and used in accordance with CAN/CGSB-43.125 as s. 5.16(1) requires, that the completed package displays the Category B mark with the shipping name in letters at least 6 mm high and a 24-hour telephone number under s. 1.39, and that the person who packed it holds a training certificate under s. 6.1(1).
Does every specimen need a 95 kPa bag in Canada?
No. Section 1.42 removes Parts 3 to 8 and Part 17 for human specimens where a competent professional has determined a minimal likelihood that infectious substances are present, provided the container is marked "Exempt Human Specimen" or "spécimen humain exempté" and will not release under normal transport conditions. Category B specimens are the ones that carry the 95 kPa packaging chain.
Where is the 95 kPa requirement written in Canadian law?
Not in the Transportation of Dangerous Goods Regulations. A full-text search of the consolidated Regulations returns no occurrence of "95 kPa". Section 5.16(1) sends Category A and Category B to CAN/CGSB-43.125, and the pressure and drop tests sit in that standard. The United States does the opposite: 49 CFR 173.199(b) writes the 95 kPa differential into the regulation itself.
Is a 95 kPa bag the same as a compliant shipment?
No. The bag is the secondary packaging. A completed Category B package is three layers with the Category B mark, the shipping name and a monitored telephone number on the outside. A bag with 95 kPa printed on it that travels in a padded envelope has neither the rigid outer packaging nor the mark.
How much absorbent material does a 95 kPa bag need?
Enough to absorb the entire contents of the primary receptacle, placed between the primary and the secondary packaging. That is the wording of 49 CFR 173.199(b), and the Canadian standard referenced by s. 5.16(1) carries the same requirement. Pad capacity has to be read against the largest primary volume in the bag.
Do clinic staff need dangerous goods training to pack a specimen?
Yes, if the specimen is Category B. Section 6.1(1) requires the person handling, offering for transport or transporting dangerous goods to be adequately trained and to hold a training certificate, or to work under the direct supervision of someone who does. Section 6.3(1) sets out what the certificate must contain, including its expiry date.
Last updated: 11 November 2026.