Lab Consumables: Sizes, Specs and Case Units for Ontario Clinics

Clear graduated specimen container with a blue screw cap and a white label on the lid, photographed against a blue gradient background

Ontario does not license a specimen cup. It licenses the laboratory and the specimen collection centre, and it regulates what the people in those places may do with what arrives in the cup. That is the frame a clinic needs before it starts comparing case counts, because the same consumable sits inside a different file depending on whether the clinic tests on site, collects and ships, or only hands a container to a patient.

The consumables themselves are ordinary: 90 mL graduated specimen cups at six hundred to a case, sterile 100 × 15 mm petri dishes at three hundred and twenty, sterile 50 mL centrifuge tubes at five hundred. What follows is the sizing arithmetic and the Ontario rules that decide who is allowed to hold the stock.

Which Ontario rules apply when a clinic buys lab consumables?

The licensing instrument is the Laboratory and Specimen Collection Centre Licensing Act, and it regulates places rather than products. Section 9(1) prohibits establishing, operating or maintaining a laboratory without a licence issued by the Director; section 9(3) applies the same rule to a specimen collection centre. Section 14(1) then limits a laboratory to the tests authorised by its licence, and section 14(2) limits a collection centre to the specimen taking it is authorised to do.

The regulation adds the operating conditions. R.R.O. 1990, Reg. 682 requires an application for a licence to go to the Director, sets the conditions attached to a laboratory licence, requires staff qualified for the classes of tests sought and premises suitable for them, and designates the quality management agency: section 14 names the Institute for Quality Management in Healthcare to carry out a quality management programme. Specimen collection centres sit under their own regulation, R.R.O. 1990, Reg. 683.

None of those provisions licenses a consumable. A clinic that buys cups, dishes and tubes needs no Ontario permit for the purchase; it needs the licence when it starts operating the place where specimens are examined or taken.

Can an Ontario laboratory give collection supplies to the doctors who send it specimens?

Yes, and the provision is unusual enough to be worth knowing by number. Reg. 682, section 2(5), allows an owner or operator of a laboratory to provide supplies and equipment to a requesting health professional, with or without charge, where the supplies are to be used exclusively for the procurement or maintenance of specimens to be sent to the laboratory or for the reporting of results. The same regulation's earlier subsections prohibit conferring benefits on a requesting professional, so subsection (5) is a carve-out with a narrow test: the supplies must be exclusively for specimen procurement or maintenance.

For a clinic this settles a common question. A laboratory may hand out its own containers, transport bags and requisition materials to the physicians who send it work, and the arrangement does not become an inducement, provided the exclusivity test is met. What the provision does not do is move the licence: the container still sits inside the laboratory's own quality file, and the laboratory remains responsible for the specimen it accepts.

Question Answer under Reg. 682 Practical consequence
Can a laboratory supply containers to a requesting physician? Yes, section 2(5), if used exclusively for specimen procurement or maintenance A branded collection kit is permitted
Can it supply general clinic consumables? No, the carve-out is limited to specimen procurement and reporting Gloves and paper goods stay on the clinic's own purchase order
Does the arrangement need to be charged? No, "with or without charge" is explicit Free issue is permitted inside the test
Does that remove the licence duty? No, sections 9(1) and 9(3) are untouched The laboratory remains the licensed party
Clear graduated specimen container with a blue screw cap and a white label on the lid, photographed against a blue gradient background
The container a laboratory issues to a requesting physician is covered by a specific provision in Reg. 682, not by a general freedom to distribute supplies.

Which case sizes and specifications do Ontario laboratories order?

The sizes below are the ones the catalogue carries, and the case unit is written the way a purchase order needs it.

Item Size and specification Case unit Ontario note
Graduated specimen cup 90 mL, leak-proof screw cap, graduated 600 cups (6 × 100) The routine collection container for a licensed collection centre
Sterile specimen container 120 mL, sterile, screw cap, tamper-evident 200 containers (2 × 100) Sterile work only; smaller case because use is selective
Sterile petri dish 100 mm × 15 mm, polystyrene, vented 320 dishes Plating inside a licensed laboratory
Centrifuge tube 15 mL sterile, graduated, screw cap 500 tubes Draw and aliquot; the tube is the unit of work
Centrifuge tube 50 mL sterile, graduated, screw cap 500 tubes Same count, different bench use
Cotton swab 6 inch, double tipped 1,300 swabs (13 × 100) Swab bench volume
Specimen transport bag 6 × 9 inch, 3-wall, document pouch, absorbent pad 1,000 bags (10 × 100) Courier volume for a collection centre
Sharps container 1 quart, puncture-resistant 20 containers Bench-side disposal at the collection point

Two of these are Ontario-relevant beyond the arithmetic. A collection centre that draws blood and hands out urine containers consumes the cup and the transport bag at the same rate, because the specimen does not leave without both. And a laboratory that issues containers under section 2(5) has a second demand curve — the requesting physicians' stock — which is easy to miss when the par level is calculated from in-house bench counts alone.

How does Ontario's quality programme compare with a United States CLIA certificate and with the rest of Canada?

Both countries license the laboratory rather than the consumable, and both attach the consumable to a quality system. The instruments differ in who runs the programme and what the certificate covers.

Item Ontario United States
What the place needs Licence under section 9(1) for a laboratory, 9(3) for a specimen collection centre CLIA certificate for the laboratory, with the requirements in 42 CFR 493.1101
Who runs the quality programme The Minister designates an agency; Reg. 682, section 14 designates the Institute for Quality Management in Healthcare The federal survey programme and approved accreditation bodies
What it says about consumables The laboratory has to show its containers and methods are fit for the examinations it performs Facility requirements, with the manufacturer's instructions as the operating condition
Scope of the licence Classes of tests authorised by the licence, under section 14(1) Certificate level by test complexity
Where the standard reference sits ISO 15189:2022 as the quality standard the programme works to CLIA regulations, with ISO 15189 as a voluntary accreditation route

The practical difference for a buyer is the paper trail. An Ontario laboratory under the IQMH programme is asked for its specification for each consumable and the evidence that the specification is met; an American laboratory is asked for its certificate and its procedure, with the consumable evidence supplied by the manufacturer's instructions for use.

Does an Ontario laboratory order consumables the same way as one elsewhere in Canada and in the United States?

The products are identical and the constraints are not. Ontario adds a licence for the place and a designated quality agency; the rest of Canada relies on provincial laboratory regulation that varies by province; the United States adds a federal certificate and a product-code classification for the consumable itself.

Item Ontario Rest of Canada United States
Licence for the laboratory Yes, section 9(1) Provincial regulation, different in each province CLIA certificate
Quality programme Reg. 682, section 14, IQMH designated Provincial arrangement Federal survey or approved accreditor
Consumable classification Class I under Schedule 1 Rule 7(1) of the Medical Devices Regulations Same federal rule Product code under 21 CFR 864.3250
Language on the pack Either English or French under section 23(1) Either English or French federally; French required in Quebec under its charter English

The row that surprises Ontario buyers is the language one. A professional-use pack can lawfully arrive in Ontario in French only, because the federal minimum permits either language, and Ontario adds no provincial requirement for a professional-use device. A clinic that cannot read the instructions on the pack it received has a procurement problem, not a regulatory one, and the fix belongs in the specification.

What does the quality programme ask of the consumable file?

Three things, and they are the same three an inspector will ask for.

First, a specification per consumable: the size, the material, the sterility claim and the standard the product is described against. Second, evidence that the delivered lot meets it, which for a sterile item means the packaging validation and for a non-sterile item means the manufacturer's declaration. Third, a record that ties the lot to the work, because a rejected specimen that cannot be traced to a container lot is a rejection that cannot be investigated.

ISO 15189:2022 frames that file, and ISO 11607-1:2019 supplies the packaging requirement for anything carrying a sterile claim. For blood collection, ISO 6710:2017 is the product standard and the reason tubes are specified by draw volume and additive.

How does a laboratory turn bench workload into cases?

Divide the daily count by the case count and multiply by working days. A licensed laboratory that runs twenty cups a day through microscopy uses a six-hundred-cup case in thirty working days; a plating bench at thirty dishes a day uses a three-hundred-and-twenty-dish case in eleven.

Bench Daily count Case count Working days per case
Urine microscopy 20 cups 600 30
Plating 30 dishes 320 11
Draw and aliquot 40 tubes 500 12
Swab bench 60 swabs 1,300 21
Courier dispatch 40 bags 1,000 25

Add the outbound issue for a laboratory that supplies containers to requesting physicians under Reg. 682, section 2(5). That demand is driven by the number of referring practices rather than by the bench, and it is usually the reason a collection centre runs out of cups while its own microscopy bench is fully stocked.

Two clear specimen containers with white caps standing on a reflective white surface
Two demand curves, one stock line: in-house bench use and the containers issued to requesting physicians are counted separately.

What should an Ontario purchase order state?

The item, the size in metric units, the material, the sterility claim, the case unit in each, and the standard with its edition year where one applies. Add the language of the instructions for use, because section 23(1) permits a single language and the clinic is the party that has to read it. Add the storage condition where the product has one, since section 21(1)(j) puts special storage conditions on the label.

Where the buyer is a licensed laboratory, one more line belongs on the order: the lot number retention period, because the quality programme needs the lot tied to the work and a supplier who cannot supply lot numbers cannot support that record.

References

  • Laboratory and Specimen Collection Centre Licensing Act, R.S.O. 1990, c. L.1, sections 9 and 14 — ontario.ca (checked 11 November 2026)
  • R.R.O. 1990, Reg. 682, Laboratories, sections 2, 3, 5 and 14 — ontario.ca (checked 11 November 2026)
  • R.R.O. 1990, Reg. 683, Specimen Collection Centres — ontario.ca (checked 11 November 2026)
  • Institute for Quality Management in Healthcare — iqmh.org (checked 11 November 2026)
  • Medical Devices Regulations, SOR/98-282, Schedule 1 Rule 7, sections 21 and 23 — laws-lois.justice.gc.ca (checked 11 November 2026)
  • Medical devices portal — canada.ca (checked 11 November 2026)
  • 42 CFR 493.1101, laboratory requirements — law.cornell.edu (checked 11 November 2026)
  • 21 CFR 864.3250, specimen container — law.cornell.edu (checked 11 November 2026)
  • 21 CFR part 801, labelling — ecfr.gov (checked 11 November 2026)
  • FDA product classification database — accessdata.fda.gov (checked 11 November 2026)
  • Device classification API, specimen container codes — open.fda.gov (queried 11 November 2026)
  • ISO 15189:2022, medical laboratories — genorma.com (checked 11 November 2026)
  • ISO 11607-1:2019, packaging for terminally sterilized devices — genorma.com (checked 11 November 2026)
  • ISO 6710:2017, containers for venous blood collection — genorma.com (checked 11 November 2026)
  • Routine practices and additional precautions — publichealthontario.ca (checked 11 November 2026)
  • Standard precautions for healthcare — cdc.gov (checked 11 November 2026)
  • Biological hazards — ccohs.ca (checked 11 November 2026)
  • CLSI standards catalogue — clsi.org (checked 11 November 2026)
  • Infection prevention and control — who.int (checked 11 November 2026)
  • Act respecting medical laboratories, chapter L-0.2, section 31 — legisquebec.gouv.qc.ca (checked 11 November 2026)
  • Autorité des marchés publics — amp.quebec (checked 11 November 2026)

Related reading

Frequently asked questions

Which Ontario licence applies to a laboratory or a specimen collection centre?

The Laboratory and Specimen Collection Centre Licensing Act. Section 9(1) prohibits operating a laboratory without a licence from the Director, and section 9(3) applies the same rule to a specimen collection centre. Section 14(1) limits the laboratory to the tests authorised by its licence and section 14(2) does the same for specimen taking in a collection centre.

Does a clinic need a licence to buy specimen cups in Ontario?

No. Ontario licenses places, not consumables. A specimen container is a Class I non-invasive device under Rule 7(1) of the Medical Devices Regulations and carries no licence requirement under section 26. The licence question arises when the clinic operates a laboratory or a specimen collection centre.

Can a laboratory give collection containers to the physicians who send it specimens?

Yes. Reg. 682, section 2(5), allows an owner or operator of a laboratory to provide supplies and equipment to a requesting health professional, with or without charge, where they are used exclusively for the procurement or maintenance of specimens sent to that laboratory or for reporting results. It is a carve-out from the benefit rules, not a general freedom to distribute supplies.

What does the quality management programme require?

Reg. 682, section 14, designates the Institute for Quality Management in Healthcare to carry out a quality management programme. In practice the laboratory is asked for a specification per consumable, evidence that the delivered lot meets it, and a lot record that ties the container to the work it was used for.

How many pieces are in a case of specimen cups or petri dishes?

Six hundred 90 mL cups in a case, because the case is six packs of one hundred. Three hundred and twenty dishes in a case of 100 × 15 mm sterile polystyrene. Five hundred tubes in a case of 15 mL or 50 mL sterile centrifuge tubes.

Is the Ontario case unit the same as the American one?

Not necessarily. American catalogues often quote a case as a count of inner boxes and state the unit count separately, while Ontario suppliers usually describe the shipping carton. Ask for the count in each, in writing, before comparing two quotations.

Putting the stock under a licence file

The compliance log centre carries the printable logs that put a bench count and a consumable count on one sheet, and the supply planner on that page converts a daily count into cases per month. For a standing order across several Ontario sites, the route is the institutional account enquiry page; where the laboratory also runs an in-house sterilizer and the consumable file has to sit with the reprocessing records, the sterilization compliance consultation covers that side. Reselling? become a distributor.

CliniEco Medical distributes clinic consumables in Canada under MDEL #35334. This article describes requirements published by the Government of Ontario, Health Canada and the United States federal register; the requirement that binds a specific laboratory remains the one in its licence conditions, its quality management programme and its own written procedure.

Last updated: 11 November 2026.

Already working with clinics? Become a regional representative.