How are cases packed and tracked between Canadian dental practices and labs?

Pair of blue nitrile examination gloves laid flat on a white background

How are cases packed and tracked between Canadian dental practices and labs?

A dental practice sends work out and gets work back, and between those two events there is a bag, a prescription, a courier and a log. When a case goes missing or a crown comes back on the wrong tooth, the practice discovers which of those four it did not control. The packing and tracking routine is short, but it only works when each part is written down.

The consumables that leave with the case are simple: an alginate impression material canister, a pack of dental x-ray bite blocks for the records that travel with the case, and a latex dental dam where the isolation technique is part of the case notes.

How is a case packed?

Rinse the impression under running water, then disinfect it according to the impression material manufacturer's instructions. Alginate is the constraint: it absorbs water and distorts if it soaks, so a spray or a short immersion is what the material allows, and the disinfection step has to be timed rather than left to run.

Light blue disposable gown shown front and back, with close-ups of the seam tape and waist ties

Once disinfected, the impression goes into a sealed bag with the bite registration, any opposing cast and the prescription. The bag is closed and labelled with the patient identifier and the case number before it leaves the operatory, not at the front desk, because the front desk is where cases get separated from their paperwork.

What belongs on the prescription?

Field Why it travels with the case
Patient identifier links the case to the chart without a name on the outside of the bag
Tooth or quadrant prevents a crown on the wrong unit
Material and shade the laboratory cannot choose either
Design and margin defines what is being made
Date required sets the laboratory's schedule
Clinician name the person answerable for the design
Disinfection confirmation shows the laboratory the step was done

Pair of blue nitrile examination gloves laid flat on a white background

How is the case tracked?

A case log with a line per case: date out, laboratory, case number, contents, expected return and date in. The date-in column is the one that gets neglected, and it is the column that answers the patient who calls about a crown that has not come back.

A tracking method that survives a busy week is one that matches the front desk's existing routine. A paper log kept at the desk is more reliable than an app nobody opens, and a photograph of the prescription on the day the case leaves costs nothing and settles most disputes.

What comes back, and what does the practice do with it?

A returned case is a new object in the practice: it has been in another building and it needs to be disinfected before it is tried in, according to the laboratory's instructions and the material. Prostheses and appliances are handled with gloves, and the packaging they arrive in is waste, not stock.

For the supplies that support the routine, the dental practice supplies page groups impression materials, bite blocks, dams and the operatory consumables that go with them.

Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

References

  1. C-4: Management of Biomedical Waste in Ontario — Ontario Ministry of the Environment, Conservation and Parks (checked 7 November 2026)

Printable companion: the free log and checklist library includes a case-out and case-in log sheet with columns for the prescription and the return date.

Estimating monthly impression volume? The clinic supply and cost planner converts case loads into alginate, trays and bite blocks.

Not sure how this applies to your own setup? Ask a sterilization compliance specialist — you’ll get a written answer specific to your equipment and province, with the regulation or standard cited.

Related Reading

Frequently Asked Questions

Does an impression need to be disinfected before it goes to the lab?

Yes. The impression is rinsed and disinfected according to the impression material manufacturer's instructions before it is bagged, and alginate cannot be immersed for long because it absorbs water and distorts.

What has to be in the case bag besides the impression?

The prescription: patient identifier, tooth or teeth, material, shade, design and the date required. A case that arrives without a prescription has to be held, because the laboratory cannot legally or safely guess the design.

Is a dental case a dangerous good in transport?

Not by default. An impression is not an infectious substance unless it is contaminated with a pathogen, so it travels as an ordinary package rather than under the infectious substances rules. It is the disinfection step, not the transport classification, that controls the risk.

How is a case tracked while it is out?

A case log records the date out, the courier or hand delivery, the laboratory, the case number and the expected return date. The return entry closes the loop and is the record that answers a patient question about a missing crown.

Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Already working with clinics? Become a regional representative.