What waste rules apply to plaster, stone and investment materials in Canadian dental labs?
---
A dental lab throws out two piles of grey scrap that look alike and belong in different places. One is set plaster, model stone or die stone: calcium sulfate that has already taken up its water and hardened. The other is spent investment, a refractory powder built around silica that survives the burnout furnace. Neither is a biomedical waste category, and that one fact decides the bag, the label and what the pickup driver will accept. The material that makes the scrap and the bag that holds it are ordered together, which is why the alginate impression material, two 1 lb canisters sits on the same requisition as the waste line.
Is set plaster or die stone biomedical waste in Canada?
No. Ontario works from Regulation 347 and the ministry's C-4 guideline, and both define biomedical waste by a closed list: human anatomical, human blood, animal anatomical and blood, microbiology laboratory, sharps, cytotoxic and blood-borne infectious waste. Set gypsum appears on none of them, so a discarded model is general waste.

Which dental lab items still go in a red biomedical waste bag?
The blood-soaked ones and the sharp ones. Gauze carrying visible blood from a surgical case goes into a red biohazard bag, 30 gallon, leak-proof with the universal symbol, refrigerated if the lab stores it more than four days. Blades and needles go into a puncture-resistant sharps container closed at its fill line, which is the job CSA Z316.6 defines.
| Material | ISO 6873 type | What it becomes | Where it goes |
|---|---|---|---|
| Impression plaster | Type 1 | brittle impression model | general waste |
| Model plaster | Type 2 | study model | general waste |
| Dental stone | Type 3 | working model | general waste |
| Die stone | Type 4 or 5 | die, high strength | general waste |
| Phosphate-bonded investment | not covered | casting ring mould after burnout | general waste, dust-controlled |

Can plaster or die stone go down the drain?
Not from a working lab. Gypsum that sets inside a trap or a drain line sets as a hard mass, and the repair is a plumbing bill. The working practice is a sedimentation trap or a fine strainer under the trimmer, solids scooped out after they settle and bagged as general waste, and only fines leaving with the water.
How do you handle investment material dust?
Wet, and with extraction. Phosphate-bonded and gypsum-bonded investments contain silica, and silica is one of the substances Ontario's workplace regulation treats as a designated substance with an exposure limit. Dry sawing a casting ring puts that dust into the air of a room where one person works all day. Trim wet, keep local exhaust at the bench, bag residue while it is damp, and never dry-sweep a bench; a lab consumables set with parafilm and serological pipettes covers the wet side of the same bench.
Running a dental practice with an in-house lab? Dental practice supplies and lab consumables collect the impression, bib and waste lines that are ordered together. Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.
References
- Ontario Regulation 347: General - Waste Management (checked 6 November 2026)
- Ontario Ministry of the Environment, Conservation and Parks: C-4 Management of biomedical waste in Ontario (checked 6 November 2026)
Printable companion: the clinic compliance log pack carries a waste line per pickup, so the bag count, the date and the carrier signature sit on one sheet the inspector can read.
Work the monthly consumable order out from case volume with the clinic supply planner rather than from reorder habit.
Related Reading
- Dental Lab Disinfection: Cleaning Impressions Without Damage
- Which Standards Apply to Alginate Impression Material in Alberta Clinics?
Frequently Asked Questions
Is set plaster or die stone biomedical waste in Canada?
No. The biomedical waste categories used in Ontario are a closed list - human anatomical, human blood, animal anatomical and blood, microbiology laboratory, sharps, cytotoxic and blood-borne infectious waste - and set gypsum is not on it. Scrap models and dies go out as general waste.
Can plaster and stone be rinsed down the sink?
Not from a working lab. Calcium sulfate sets hard once it dries in a trap or a drain line, so trimmed material is captured in a sedimentation trap or a strainer and the solids go into general waste. What leaves the lab is water with fines, not set stone.
Which dental lab scraps do need a red biomedical waste bag?
The blood-soaked items: gauze and cotton carrying visible blood, suction line contents collected during surgery, and any disposable that is saturated. Blades, burs that are no longer usable and needles go into a sharps container instead.
Does investment material need different handling from stone?
Yes, for one reason: dust. Phosphate-bonded and gypsum-bonded investments carry silica, and dry trimming or dry sawing puts it into the air. Trim wet, use local exhaust, and bag the residue rather than sweeping it dry.
Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).