How does a Canadian dental laboratory classify alloy, resin and gypsum waste?

Red biohazard waste bag on a roll with the biohazard symbol printed on the film

How does a Canadian dental laboratory classify alloy, resin and gypsum waste?

A dental laboratory casting forty units a week generates three waste streams that look similar in a lined bin: metal scrap from castings, resin from printing, and gypsum from pouring dies. Getting them into the wrong container is the expensive mistake: a receiving facility can reject a load.

The CliniEco biohazard waste bag, red, 30 gallon, leak-proof is the container for the items that do meet the Ontario definition of biomedical waste, and using it for the other two streams is what turns a compliant load into a rejected one.

Which stream does each material belong to?

Material Ontario stream Container and label Who takes it
Amalgam scrap, old restorations mercury-bearing waste (common mercury waste, Reg. 347) airtight container labelled as mercury waste hazardous waste carrier or recycler
Uncured resin, monomer, solvent assessed against hazardous characteristics closed container, SDS on file hazardous waste carrier if it carries one
Cured resin, printed parts, model material non-hazardous solid industrial waste lined bin general waste contractor
Set plaster, die stone, investment material non-hazardous solid industrial waste lined bin, dust controlled general waste contractor
Blood-saturated gauze from a case biomedical waste red bag biomedical waste carrier

Why is amalgam treated as mercury waste rather than biomedical waste?

Because Ontario's waste regulation names it. Regulation 347 defines common mercury waste to include discarded material containing mercury from dental procedures carried out by a member of the Royal College of Dental Surgeons of Ontario. The same regulation keeps such a member's office waste out of the definition of subject waste, so a dental office is not a registered hazardous waste generator for routine waste while mercury-bearing material still travels on its own paperwork.

CliniEco red biohazard waste bag labelled 30 gallon, leak-proof, 5-pack

The federal layer sits above that. A notice in the Canada Gazette on 18 April 2009 required pollution prevention plans for mercury releases from dental amalgam waste, and its practices are the ones labs still follow: separate unused from used amalgam, collect it in an airtight break-resistant container, label it as mercury waste, and hand it to a carrier for recycling or disposal.

Can set plaster or die stone go in the garbage?

Yes, once it has set. The C-4 guideline lists the categories that make waste biomedical in Ontario: anatomical waste, human blood waste, animal waste, laboratory waste, sharps, cytotoxic waste, and items in contact with infected blood. Set stone is on neither that list nor the hazardous characteristics.

Two things go wrong in practice: pouring plaster down a drain sets in the trap, and dry investment powder is a dust exposure that belongs in a closed container.

What about uncured resin and monomer?

Red biohazard waste bag on a roll with the biohazard symbol printed on the film

This is where the safety data sheet decides, not the material name. Regulation 347 sorts hazardous waste by characteristic: ignitable, corrosive, leachable toxic, reactive. A resin or solvent that flashes below the ignitable threshold travels as hazardous waste; a cured printed part goes out as solid waste.

What has to be labelled and kept?

Every container carries the material name, the hazard where one applies, and the date it was opened. Mercury-bearing material moves through a carrier authorized for that class, with the generator registration and manifest trail; solid gypsum and cured resin move on a commercial contract. The records that survive an inspection connect a container to a carrier: pickup log, manifests, data sheets, mercury-waste log.

Ordering for a dental laboratory or multi-site group? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

Running a dental laboratory? The dental practice and laboratory supply page groups the consumables and waste containers that labs order by the case.

Printable companion: the free compliance log set includes a waste stream container label sheet and a pickup log with the fields above; the supply and cost planner estimates bin and container counts from weekly case volume.

CliniEco Medical is a licensed medical device establishment (MDEL #35334).

References

  1. R.R.O. 1990, Reg. 347 (General — Waste Management), s. 1 — Ontario (checked 12 November 2026)
  2. C-4: The management of biomedical waste in Ontario (checked 12 November 2026)
  3. Notice requiring pollution prevention plans for mercury releases from dental amalgam waste, Canada Gazette, 18 April 2009 (checked 12 November 2026)
  4. Generators of liquid industrial and hazardous waste — Ontario guidance (checked 12 November 2026)

Related Reading

Frequently Asked Questions

Is set plaster or die stone biomedical waste?

No. Once set, plaster, stone and investment material do not meet the Ontario definition, which covers human blood waste, anatomical waste, laboratory waste, sharps and cytotoxic waste.

Is amalgam scrap hazardous waste in Ontario?

It is handled as mercury-bearing waste: Regulation 347 defines common mercury waste to include discarded material containing mercury from dental procedures, so scrap amalgam goes in a labelled container, not a red bag.

Can uncured resin go in the regular garbage?

Not while it is liquid or paste. Uncured resin and monomer are assessed against the hazardous characteristics in Regulation 347, and the supplier's safety data sheet answers the question.

Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Already working with clinics? Become a regional representative.