CliniEco Universal Touch-Free Sensor Dispenser — Fits Standard 25–38 mm Bottles

Universal touch-free sensor soap & sanitizer dispenser — fits standard bottles.

A single wall-mounted sensor unit that turns an ordinary off-the-shelf soap or sanitizer bottle into a no-touch dispenser. The adjustable collar accepts standard bottle necks from 25 mm to 38 mm, so you keep using the product you already buy.

Which bottles does the adjustable collar actually fit?

The collar accepts standard bottle necks from 25 mm to 38 mm, which covers most off-the-shelf soap and sanitizer bottles sold in Canada — so the purchase you keep making stays the same and only the dispensing changes. Check the neck on the bottle you intend to use before ordering: a pump bottle with an unusual thread, or a pouch system, will not seat in this unit and needs the sealed-pouch dispenser instead.

Does it work with foam, gel and spray?

Yes — the unit is listed for foam, spray and gel formulations, and the sensor fires in about a quarter of a second, so a hand is under the spout before it has finished arriving. What changes between formulations is how much comes out per trigger: a gel needs a longer press than a foam, so the first week with a new bottle is spent adjusting the collar depth rather than the soap.

What has to be ordered separately?

The unit ships as the dispenser only: sensor head, adjustable collar, wall fixings and either C-cell batteries or a 6 V adapter. No soap and no sanitiser is included, because the whole point of the universal collar is that you fit the bottle you already buy. Budget two to four weeks for dispatch as well — the unit is made to order, so the install date should follow the delivery, not the other way round.

Where should it be mounted and how is it maintained?

At the point hands are cleaned: the entry to a treatment room, beside a sink staff pass, or at a reception desk, at a height that lets a standing adult catch product in a cupped hand. Keep it out of direct window light and away from a mirror directly opposite the sensor, or the unit will fire at nothing until the batteries flatten. Maintenance is three checks on a fixed interval: battery or adapter, a wipe of the sensor window, and a look at the collar when a bottle is changed.

Does the dispenser claim anything about the soap?

No. The listing states that this is a dispensing appliance, not a medical device, and that no antimicrobial, disinfecting or therapeutic claim is made for it — so nothing here describes what the product inside the bottle does. Where a room needs the sealed-pouch format instead, the 1200 ml sealed-pouch foam dispenser is the matching unit, and the 1200 ml foam hand sanitizer refill and the Aurelia 12 × 60 ml clinic pack, NPN 80122015 are the hand-hygiene lines that go with it.

Count the dispenser points per floor in the clinic supply planner, print the battery-and-refill check sheet from the compliance log centre, and route a hand-hygiene policy question to the compliance desk. Facilities fitting several buildings order through our clinic ordering desk.

Distributed in Canada by CliniEco Medical, Toronto — MDEL #35334.

• Universal bottle collar — fits most 25–38 mm standard bottle necks
• Sensor-operated — no-touch dispensing, 0.25 s response
• Works with foam, spray and gel formulations
• Wall-mounted, with fixings
• Runs on C-cell batteries or a 6 V adapter

Supplied as the dispenser unit only — no soap or sanitizer is included; it is designed for bottles you already have. This is a dispensing appliance: it is not a medical device and no antimicrobial, disinfecting or therapeutic claim is made.

Made to order — please allow approximately 2–4 weeks for dispatch.