Extraction forceps and elevators are the instruments a practice is least likely to replace and most likely to under-document, because they last for years and nobody re-reads the leaflet. They are also the family with the cleanest standards position: a forceps standard that sets general performance requirements, an elevator standard that was consolidated in 2025, and a materials reference for the steel. The documentation problem sits in the middle: the hinge on a forceps and the edge on an elevator both defeat a routine wash, and neither defect is visible on a purchase order.
Two documents carry the weight. The manufacturer's processing instructions tell the office what cycle the instrument tolerates. The office procedure tells a new hire what to do at the bench. A practice that holds the first and not the second has a document, not a process; one that holds the second and not the first has invented a process. The bridge between them is the record that a load ran, which is why a Class 4 self-sealing pouch with dual indicators appears in the file for a family that is otherwise entirely about steel.
Which standard covers forceps, and which covers elevators?
They are separate documents and they are not interchangeable, which matters when a supplier sends one certificate for a tray that contains both. ISO 9173-1:2016 sets general performance requirements for extraction forceps. ISO 15087:2025 sets requirements and test methods for metallic dental elevators, consolidating the requirements that were previously published in parts, including the 1999 general requirements edition. Both are checkable references a buyer can name on a purchase file.
| Document | What it fixes | What it does not decide |
|---|---|---|
| ISO 9173-1:2016, extraction forceps, general performance requirements | Performance requirements for extraction forceps | Which pattern suits a given tooth or a given clinician |
| ISO 15087:2025, dental elevators | Requirements and test methods for metallic dental elevators, with dimensional provisions | Sharpening intervals, which are a manufacturer and office decision |
| ISO 7153-1:2016, metallic materials, stainless steel | The steel grades an instrument is made from | Whether the grade is appropriate for the office's cleaning chemistry |
| ISO 17664-1:2021, processing information from the manufacturer | What the instructions must cover for critical and semi-critical devices | Whether anyone in the room follows them |
The distinction that gets lost is between performance and fitness. A forceps can meet ISO 9173-1 and still be the wrong pattern for a practice that does mostly surgical extractions. An elevator can meet ISO 15087 and still be sharpened to a geometry the manufacturer no longer supports. Neither is a standards failure; both are procurement decisions that belong in the file with a date.


What must the label state before the instrument is used?
Section 21(1) of the Medical Devices Regulations requires a label that sets out the name of the device, the manufacturer's name and address, the device identifier, an indication of package contents where those are not obvious, the word sterile where a sterile claim is made, an expiry date where one exists, the intended use, the directions for use and any special storage conditions. Section 21(2) requires the information to be legible, permanent and prominent, and section 23(1) permits English or French for devices sold to professionals.
| Label field | What it decides for forceps and elevators |
|---|---|
| Name and manufacturer | Who is answerable for a fractured forceps or a bent elevator tip |
| Identifier and contents | Pattern number, size, and whether the tray contains a matched pair |
| Intended use | Whether the instrument is for extraction, for elevation, or for both as a set |
| Directions for use | The cycle the manufacturer allows and any lubrication or drying instruction for the hinge |
| Storage conditions | Whether long-term storage in a drawer is acceptable between uses |
For this family the directions field does the most work, because the hinge is the failure point. A forceps that is cleaned without the joint being opened, or lubricated against the manufacturer's instruction, will look clean and behave badly. An elevator has no hinge but has an edge, and an instruction that forbids certain cleaning chemistries is a real constraint rather than boilerplate.
What does Ontario add?
The Royal College of Dental Surgeons of Ontario requires dentists to follow the College's infection prevention and control standard and public health guidelines as well as the recommendations of manufacturers of sterilization and other dental office equipment. That sentence converts the leaflet from reference material into part of the standard of practice, and it is the sentence to quote when a supplier says the office can choose its own cycle.
The College publishes its infection prevention and control standard, a self-audit review form and an indicator flowchart, and states that the standard is aligned with Public Health Ontario, the Public Health Agency of Canada and the Provincial Infectious Diseases Advisory Committee. Public Health Ontario's dental practice checklist and its environmental reprocessing areas checklist are the working documents a public health unit brings.
How does the hinge change the procedure?
A hinged instrument needs a step that a solid one does not: the joint has to be worked open during cleaning so that debris does not sit in the pivot, and it has to dry before packaging. That is a procedure detail, which is why a general statement such as "clean and sterilize as usual" fails the test of a written procedure. A practice that documents the open-joint step, the cleaning chemistry and the drying time has something a new hire can follow and an inspector can read.
Elevators need the complement: an inspection step for the edge and the tip, recorded, because a bent tip is both a clinical risk and a sign that the instrument was used beyond its intended purpose. Neither step is expensive; both are the kind of item that is missing when a file is reviewed, because they live in habit rather than on paper. Our pages on what an auditor checks about forceps and elevators and on cleaning and sterilizing them between patients cover the bench sequence in detail.
What belongs in the file for this family?
Four items, in the order they are created. The specification sheet, which names the pattern, the steel and any standard the supplier claims. The label photograph, taken before the packaging is discarded. The processing instructions, which for a hinged instrument should be read for the lubrication and drying statements specifically. And the office procedure with the joint step and the edge inspection written out, plus the cycle record that shows the procedure ran; an enzymatic ultrasonic cleaning solution with a stated dilution and change interval is the part of that record most often left to memory.
The annual review for this family is short enough to be realistic: take the oldest forceps in service, find its leaflet, check that the pattern number on the instrument matches the specification sheet, and ask a hygienist to describe the joint step without looking at the procedure. If the description and the document agree, the file is doing its job. If they diverge, the document is wrong even when the practice is right, and that is the gap a reviewer records.
Where does a practice take this next?
Three things to act on rather than read: the printable compliance log sheet that records receiving dates, lot numbers and open-on dates and exports from the browser; the clinic supply planner that turns daily bench counts into cases per month; and, where a processor instruction or a hinge question has to be documented, Ask your compliance question which cites the regulation or standard it rests on.
Facility and multi-site buyers can Wholesale and multi-site ordering for case pricing and account setup. Reselling? become a distributor.
Related reading
- What an infection control auditor checks about extraction forceps and elevators
- How to clean and sterilize extraction forceps and elevators between patients
- How many extraction forceps and elevators a clinic needs per operatory
Frequently Asked Questions
Which standard covers extraction forceps?
ISO 9173-1:2016 sets general performance requirements for extraction forceps. It does not decide which pattern suits a given case, and it does not replace the manufacturer's processing instructions.
Which standard covers dental elevators, and is it current?
ISO 15087:2025 sets requirements and test methods for metallic dental elevators, consolidating requirements previously published in parts including the 1999 general requirements edition. A supplier citing a part-numbered edition should be asked which edition it is working to.
Does the label have to state how to clean a hinged forceps?
Section 21(1) of the Medical Devices Regulations requires the directions for use unless they are not needed for safe and effective use. For a hinged instrument the joint is the failure point, so the instruction sheet is where the lubrication and drying statements live, and ISO 17664-1:2021 sets what those instructions must cover.
What must an Ontario practice do beyond holding the leaflet?
Follow it. The College's infection prevention and control standard requires dentists to follow the standard, public health guidelines and the recommendations of manufacturers of sterilization and other dental office equipment, and the College states that its standard is aligned with Public Health Ontario and the Provincial Infectious Diseases Advisory Committee.
How should a hinged instrument be cleaned differently?
The joint has to be worked open during cleaning so debris does not remain in the pivot, and the instrument has to dry before packaging. Both steps belong in the written procedure, with the cleaning chemistry and the drying time named rather than assumed.
Do elevators need a sharpening record?
They need an inspection record. A bent or dulled tip is a clinical risk and a sign of use beyond the intended purpose, and a short documented check is easier to defend than an assurance that nobody remembers a problem.
What is the most common documentation gap for this family?
The processing instructions for the specific pattern, and the written joint step. The label is on the box and survives; the leaflet and the procedure are what practices tend to reconstruct after the fact.
Sources
- ISO 9173-1:2016, extraction forceps, general requirements — evs.ee - ISO 15087:2025, dental elevators — evs.ee - ISO 7153-1:2016, metallic materials, stainless steel — evs.ee - ISO 17664-1:2021, processing information from the manufacturer — accessdata.fda.gov - Medical Devices Regulations, SOR/98-282, sections 21 to 23 — laws-lois.justice.gc.ca - RCDSO, infection prevention and control standard and advisories — rcdso.org - RCDSO, IPAC self-audit review form — cdn.agilitycms.com - RCDSO, how to use chemical and biological indicators — cdn.agilitycms.com - Public Health Ontario, IPAC checklist for dental practice — publichealthontario.ca - Public Health Ontario, environmental reprocessing areas checklist — publichealthontario.caCliniEco Medical distributes clinic consumables in Canada under Health Canada MDEL #35334. Requirements that bind a particular practice remain the ones in its own written procedures and in the provincial rules that govern where it operates.
Last updated: 20 November 2026.