Which Ergo Angled Dental Loupes Do Dental Laboratories in Saskatchewan Order? Sizes and Case Formats

CliniEco angled loupes and headlight set specification card, 3.5x, 32,000 lux, three batteries

Which Ergo Angled Dental Loupes Do Dental Laboratories in Saskatchewan Order? Sizes and Case Formats

Saskatchewan dental laboratories buy loupes in a way that surprises a supply manager who is used to consumables. In a regulated laboratory, registered dental technicians work under The Dental Technicians Act, and the term dental laboratory itself is tied to that registration, which means the people placing the order are bench technicians rather than clinicians at a chair. Their working distance, their posture and their field of view are all set by a bench, and that changes which angled loupe fits.

The item that answers this question is the CliniEco Ergo angled dental loupes, 3.5 times, adjustable interpupillary distance, supplied as one unit per carton with a carry case. It is an angled optical path, and the angle is why a bench technician considers it.

Which magnification do Saskatchewan laboratories order?

Magnification is the number on the box and the one number every buyer already knows. A 3.5 times loupe resolves the margin of a crown or the fit of a clasp at a field narrow enough that the technician has to move the work rather than glance across it. A 2.5 times loupe keeps more of a model in view and is the choice where the job is inspection. Laboratories that order one pair for a bench and one for a second station usually end up with 3.5 times at the finishing bench.

What does the 45 degree angled path change at a bench?

A straight telescope looks where the eyes already look, so bringing a low-lying model into that line means tipping the head down and holding it there. An angled loupe turns the optical path inside the barrel: the line of sight leaves the eyepiece roughly level and arrives at the work about 45 degrees below it. The eyes stay where they are and the magnified image is presented lower, where the hands are working.

CliniEco angled dental loupes specification card, 3.5x magnification, working distance 360 to 560 mm

What the angle does not do is change the magnification or widen the field. It moves one variable: how far the neck has to flex to see the work. A laboratory buying loupes to solve a wider field is buying the wrong thing, and a laboratory buying them to reduce sustained neck flexion is buying the angle rather than the power.

Specification What the order names Why it decides the fit
Magnification 3.5 times detail at the finishing bench
Working distance one of 360, 460, 520 or 560 mm set by how the technician sits
Interpupillary distance adjustable by the wearer no fitting appointment needed
Frame weight 48 to 51 g, titanium a long session, worn all day
Case format one unit, carry case not a multi-pack, not a box of ten

Which working distance setting should the order name?

The distance from the eyes to the work, measured in the position the technician actually adopts. A bench worker leaning over a model is closer than a clinician at a chair, and a loupe ordered at 460 mm will be out of focus all day if the work sits at 360 mm. Four settings are offered, 360, 460, 520 and 560 mm, and the field of view is confirmed against the setting chosen at the time of order rather than quoted as one figure for the range.

Does a loupe frame count as eye protection in a laboratory?

CliniEco angled loupes and headlight set specification card, 3.5x, 32,000 lux, three batteries

Not automatically, and this is the correction worth carrying into a purchase decision. Eye and face protection in Canada is selected against CSA Z94.3.1, and protectors that carry the certification mark are the ones that have been tested for impact. A loupe frame is a mounting platform for optics; unless the frame itself carries that mark, it is not a substitute for safety eyewear in an area where a burr, a disc or a polishing wheel can throw material. Laboratories that grind or polish order both, and the loupes are worn under a face shield or swapped for certified spectacles at the wheel.

What arrives in the carton?

One loupe, one carry case, a cleaning cloth and the adjustment tool for the interpupillary hinge. That answers the case format question: no ten-pack and no mixed case, because each unit is set up for one wearer. A laboratory ordering for three technicians places three single-unit orders, and nothing in the carton is consumable.

What else goes on the same order?

Most benches pair the loupes with light, because the magnification narrows the view and the head then shadows it. The angled loupes with the wireless headlight set arrives as one carton with the light already matched to the frame, which removes the guesswork about whether a separately bought light will clip on and hold its position.

Ordering for a dental laboratory or a multi-site group? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

Equipping a dental laboratory or practice? The dental practice supply page groups loupes, lights and the bench consumables ordered with them.

Printable companion: the free compliance log set includes an equipment and PPE issue sheet; the supply and cost planner sizes a loupe order across technicians and stations. Open a wholesale account for multi-station and multi-site orders.

References

  1. Eye and face protectors, selection, use and care, referencing CSA Z94.3.1-16 — Canadian Centre for Occupational Health and Safety (checked 12 November 2026)
  2. The Dental Technicians Act, R.S.S. 1978, c.D-6, use of the designation and the term dental laboratory — CanLII (checked 12 November 2026)

Related Reading

Frequently Asked Questions

How many loupes come in a case?

One. A loupe is a fitted optical device sold as a single unit with its own carry case, unlike the consumables a laboratory buys by the box.

Do technicians need a fitting appointment?

Not for the adjustable frame. Interpupillary distance is set by the wearer, which is why a laboratory can order for a new hire without a clinic visit.

Is 2.5x or 3.5x the right choice for bench work?

3.5x suits fine margin work at a narrower field; 2.5x keeps more of a model in view for inspection.

Which working distance should a laboratory order?

The one that matches how the technician sits at the bench, measured from the eyes to the work, not the distance they would use at a dental chair.

Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Already working with clinics? Become a regional representative.