What PPE stock does an American dental lab hold per technician?

CliniEco ASTM Level 3 face mask, 250 masks per case

What PPE stock does an American dental lab hold per technician?

An American dental laboratory buys consumables at the bench and finds the shortage at the bench, usually mid-case. The pattern is the same in Portland and in Toronto, but the rulebook behind it is not: the US question is answered by OSHA's general industry standards, not by a dentistry standard, and that changes both what a technician wears and who writes the cheque. The working unit for most labs is one 1,000-glove case of 3.5 mil nitrile exam gloves — 10 boxes of 100 per technician per month.

Is there an OSHA standard written specifically for dental laboratories?

No, and this is the fact most supplier catalogs get wrong. OSHA's own dentistry overview states that there are currently no specific OSHA standards for dentistry, and that the hazards of dental work are addressed by the general industry standards instead. For a lab, the two that matter are 29 CFR 1910.1030, the bloodborne pathogens standard, and 29 CFR 1910.132, the personal protective equipment standard.

That has a practical consequence. A technician handling an impression or a prosthesis that carries blood or saliva is doing work covered by 1910.1030, because the standard's definition of other potentially infectious material names saliva in dental procedures. Under it, gloves, masks, eye protection and gowns are provided by the employer when exposure is reasonably anticipated.

CliniEco nitrile exam gloves, 3.5 mil, standard, blue

Item Per technician per day Per technician per month Order unit that matches
Nitrile exam gloves 20 to 40 pairs 400 to 800 pairs 1,000-glove case
Procedure masks 2 to 4 40 to 80 Box of 50, case of 500
Isolation gowns 1 to 2 20 to 40 50-pack
Bouffant caps 1 to 2 20 to 40 100-pack
Eye protection One durable pair Replaced when scratched Not a monthly item

How does the American rule differ from the Canadian one?

Both countries expect gloves, masks and eye protection at the bench, but through different instruments. The US route is a general industry regulation enforced by a workplace safety regulator. The Ontario route is provincial infection prevention guidance from Public Health Ontario and the college standards that apply to regulated professions. Neither is a product standard: what makes a mask a mask, or a glove a glove, is set separately by ASTM for the US market and by ISO or CSA for the Canadian one.

CliniEco ASTM Level 3 face mask, 250 masks per case

Question United States Ontario, Canada
What compels the PPE? OSHA 1910.1030, employer duty Public Health Ontario clinical office guidance
Who inspects? OSHA compliance officers Public health unit inspectors and colleges
What defines the product? ASTM F2100 for masks CSA and ISO designations, Health Canada authorization

The Canadian column is not a federal statute, and that trips up US labs setting up a Canadian satellite; the requirement is assembled from provincial guidance plus the device rules, not from one act.

Which lines should never run out at the bench?

Gloves, masks and the double-tipped cotton swabs that go with a margin check. A technician stopped mid-pour becomes a remake, and where the employer must provide the equipment, an empty box is a compliance question. Keep one unopened case of ASTM Level 3 face masks, 250 masks per case, behind the working stock, and hold the SMMS 40 gsm Level 2 isolation gowns and 24-inch bouffant caps, 1,000 caps per case in the same order line as the gloves rather than in a separate stationery order.

Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

Running a prosthetic or orthodontic laboratory? See our laboratory consumables and supplies for the lines that sit alongside this PPE list.

References

  1. OSHA, 29 CFR 1910.1030 Bloodborne pathogens (checked 11 November 2026)
  2. OSHA, Dentistry — overview of applicable general industry standards (checked 11 November 2026)
  3. CDC, Summary of Infection Prevention Practices in Dental Settings: Basic Expectations for Safe Care (October 2016) (checked 11 November 2026)

Printable companion: the free printable clinic count sheets give the bench a written glove and mask count, which is the number a lab manager orders from each month.

Sizing a bench before a hiring round? The clinic supply planner turns technician headcount into monthly case quantities.

Related Reading

Frequently Asked Questions

Is there an OSHA standard written specifically for dental laboratories?

No. OSHA's dentistry overview states there are no dentistry-specific standards, so a lab is covered by the general industry standards, chiefly 1910.1030 and 1910.132.

Are commercial dental lab technicians covered by the CDC dental guidance?

Yes. The CDC summary names dental laboratory technicians, both in-office and commercial, among the personnel it is written for.

Who pays for the PPE in a US dental lab?

The employer. 1910.132 requires a hazard assessment and employer-provided equipment, so a technician is not buying exam gloves out of pocket for bench work.

How much stock should a lab hold per technician?

A month of working stock: one 1,000-glove case, two boxes of 50 masks, a 50-pack of gowns and one box of caps per technician, with one unopened case of gloves behind it.

Last updated: October 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Already working with clinics? Become a regional representative.