What drives the cost per case of impression trays for a Canadian clinic?

Alginate impression material canister with a measured scoop, product diagram

What drives the cost per case of impression trays for a Canadian clinic?

An impression that lifts at the margin costs a tray, a mix and ten minutes, and the remake is scheduled before anyone adds up what the case actually consumed. The tray itself is the least expensive part of that sequence and the one blamed first.

What the tray holds is specified separately: alginate impression material, 1 lb canister sets the working time, and the dental practice supplies page covers the rest of the impression setup, from disposable bite blocks, 200 per case to the bibs on the chair.

What does one impression case take in trays?

One tray per arch for a stock tray, so a full-mouth record takes two. A case that needs a second attempt takes four. That single sentence explains most of the variance between two practices with the same patient volume.

Why does a retake cost two trays?

Alginate impression material in a one pound canister, front of pack

Because the failed attempt consumed one and the replacement consumes another. The material is lost twice, the chair time is lost twice, and the tray line doubles without an extra patient appearing in the book.

How does a stock tray differ from a custom tray on cost?

A stock tray is bought in boxes and discarded after the case. A custom tray is made for the patient from a record, which moves the cost from the box to the laboratory or the printer. The comparison only works per case, not per tray, because the custom route changes the retake rate as well as the unit price.

Tray format Trays per case What the case carries
Plastic stock tray, perforated 1 per arch Tray plus impression mix
Plastic stock tray, solid 1 per arch Tray plus impression mix
Custom tray from a record 1 per case Record, tray material, laboratory time

Alginate impression material canister with a measured scoop, product diagram

What makes a tray unusable before it reaches the mouth?

A tray that does not seat over the ridge, a tray that is too short in the vestibule, and a tray taken from a box stored where it deformed. Fit is a specification, and the case that fails on fit is a retake that had nothing to do with the material. Cotton rolls, 4,000 per box keep the vestibule dry while the tray seats.

How do you turn cases into a monthly order?

Count impressions rather than patients, then add the retake share. Sixty impression cases a month at one tray per arch and a 10% retake rate consumes around 132 trays, and that figure is the one to order against.

How should two quotes be compared?

Compare count per box, sizes offered, and whether the tray is described as single use. In the United States a preformed impression tray is Class I and exempt from premarket notification under 21 CFR 872.6880, and the material inside it is specified separately under ISO 4823:2021, which groups elastomeric materials by consistency, detail reproduction, elastic recovery and dimensional change. A quote that conflates the tray standard with the material standard is worth reading twice.

Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

References

  1. 21 CFR 872.6880, Preformed impression tray (US dental device classification) (checked 19 November 2026)
  2. ISO 4823:2021, Dentistry — Elastomeric impression and bite registration materials (checked 19 November 2026)

Printable impression log: the free template library carries printable sheets that can be dated and filed per case.

Turning cases into stock? The clinic supply planner converts impressions per week into trays and canisters.

Related Reading

Frequently Asked Questions

Is a stock tray single-use?

Most plastic stock trays are supplied as single-use. A metal tray can be reused where the practice has a validated cleaning routine for it, and the two are budgeted as different lines.

Why do retakes matter more than tray price?

A retake consumes a second tray, a second mix and a second appointment slot. One retake costs more than the tray it replaced by a wide margin.

Does tray rigidity change the cost per case?

It changes the retake rate. A tray that flexes under the impression can distort the record, and a distorted record is a remake at the laboratory rather than at the chair.

How do you record tray use per case?

Tray type, size, impression material and lot, and whether the case needed a second attempt. Four fields are enough to see which combination is costing the practice.

Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Already working with clinics? Become a regional representative.