Storing and Labelling Protégé Nitrile Exam Gloves in Canada Clinics: Expiry and Record Rules

Storing and Labelling Protégé Nitrile Exam Gloves in Canada Clinics: Expiry and Record Rules

Two questions sit behind every glove storage argument. The first is what the label has to say before the case ever reaches the clinic, which is a federal matter with a short list of required elements. The second is what the clinic writes on the box once it opens it, which is not a legal requirement at all and is the single most useful control in the cupboard. Practices tend to treat the first as the supplier's problem and the second as nobody's, and that combination is why a recall notice so often arrives at a shelf nobody can interrogate.

What has to be on the label before the case reaches the clinic?

The labelling requirements for a medical device sit in sections 21 to 23 of the Medical Devices Regulations, and the elements that matter for a case of exam gloves are short. The label must identify the device and the manufacturer and carry the identifier; it must carry the lot number where the device has one; it must carry the word "Sterile" only where the manufacturer intends the device to be sold in a sterile condition; and it must carry an expiry date where one exists, %s. A nitrile examination glove is a non-sterile, single-use device, so the label on the Protégé 4.0 mil case should state that plainly and should not carry a sterile claim.

The sterile point is where catalogues and labels part company. A glove made in a controlled environment is not a sterile glove, and a page that describes it as sterile is describing something the device is not; the word is regulated because a clinician relies on it for a different decision. The practical receiving check is to read the case label against this list and photograph it, because the carton is recycled the week it is broken down and the lot and expiry go with it.

What the case label should carry, and what it is for
Element Why it is on the label What the clinic does with it
Device identifier and name Ties the product to the licensed device Matches the invoice to the product actually bought
Manufacturer name and address Identifies who is accountable for the device The party a complaint or recall query goes to
Lot number Ties a unit to a production batch Copied into the receiving log; the key to a recall
Expiry date, where one exists The manufacturer's end of useful life Drives rotation and the open-box date
The word Sterile, only if sterile A regulated claim, not a description Absent on exam gloves; a sterile claim is a different product
Single-use indication States the intended pattern of use Rules out reprocessing or reissue of used gloves

Aurelia Protégé 4.0 mil nitrile exam gloves case with ten dispenser boxes, medical grade, non-sterile

Aurelia 4.0 mil nitrile exam glove box, sky blue, with lot and expiry on the label

How is the expiry date actually set?

The regulation is specific: where a device has an expiry date, it is determined by the manufacturer on the basis of the component with the shortest projected useful life, section 21. For a glove that means the film, the packaging and any coating are considered together and the shortest of them sets the date. It also means the date is a statement about storage as much as about the polymer: the manufacturer's stability assumption includes the conditions the case is expected to sit in, and a cupboard next to a heat sealer is not that condition.

Two clinic-side consequences follow. Stock should be planned to finish before the date rather than stored until it, which argues for a par level based on draw rather than a discount-based bulk buy; and the date is worth reading on receipt, because a case that arrives with a short remainder has been in someone else's warehouse longer than the price suggested. Nitrile film stiffens with heat and degrades faster in direct sun, so a clean dry cupboard away from the sterilizer and out of the window is the storage condition the date assumes.

What should be written on the box when it is opened?

Three things, in marker, on the face of the box: the date it was opened, the initials of the person who opened it, and the lot number copied from the carton if the box does not carry it legibly. That line answers the two questions that matter during a recall or an inspection — which batch is in use in this room, and how long has this box been open — without anyone having to reconstruct a delivery schedule from memory.

It also makes rotation visible. A cupboard of unmarked boxes has no first-in-first-out order except the one in someone's head, and that person is on holiday the week it matters. The rotation rule is simple to state: the case with the earliest expiry is opened first, and within a case the box that has been open longest is finished first. Marking the box is what turns that rule from an intention into something an auditor can see in ten seconds.

Where do cases belong, and where do they not?

Four places do more damage than any storage decision. On the floor, where a mop and a splash live. Beside the sterilizer or a heat sealer, where the ambient temperature shortens the useful life the label assumed. Under a window, in direct sun. And on an open shelf in the room that is cleaned with a spray, where the carton absorbs whatever is in the air. A clean, dry cupboard at working temperature covers every case; the rules above are just that cupboard described by what it is not.

Three practices are worth refusing outright. Decanting gloves from a labelled carton into an unlabelled bin, which destroys the lot trail for every glove in the bin. Keeping the case in the treatment room because it is convenient, which converts a storage decision into a contamination one. And reissuing gloves that have been taken into a room and returned, which turns a single-use device into an unknown. None of these is exotic; all of them appear in practices that would otherwise pass an inspection comfortably.

Which records, and for how long?

Three records, three clocks. The regulated distribution record — held by the manufacturer, importer and distributor — runs for the projected useful life of the device plus two years after shipment, section 56, and must be retrievable in a timely way. The clinic's own receiving and issue log should be kept at least as long, because it is the only record that links a lot to the rooms it reached. The purchase invoice sits on a third clock: six years under the business record rules, and longer where a facility contract or group purchasing agreement says so.

The record set and its clocks
Record Held by Kept for What it proves
Distribution and lot records Manufacturer, importer, distributor Useful life plus two years after shipment Which batch went where
Receiving log with lot, date, quantity The clinic Match the distribution record Which case is in this cupboard
Issue log by room The clinic Match the distribution record Where the batch was used
Purchase invoice The clinic Six years under business record rules What was bought, when, at what price
Opened-box date and initials The clinic, on the box Until the box is finished Which batch is in use, and since when

How does this connect to the licensing file?

Medical gloves are Class II devices in Canada, so the case on the shelf traces back through an establishment licence held by the importer or distributor to a device licence held by the manufacturer, as the federal page on medical gloves sets out, and the licence itself can be confirmed in the licence listing. The technical sheet that should sit with that paper normally names ASTM D6319, and the symbol set a supplier uses on the carton is described by ISO 15223-1 — useful when a clinic in a French-language setting is trying to read a box printed for another market.

None of that replaces the marker line on the box. The licence file proves the product could be sold; the receiving log proves which shipment arrived; only the open-box date tells the clinic which batch is in the room today. The cheap control and the formal one do different jobs, and a practice that runs both never has to reconstruct anything under pressure.

Where does a clinic take this next?

Three things a clinic can act on rather than read: a printable compliance log sheet that records dates, lot numbers and stock movements and exports from the browser; the clinic supply planner that turns procedure or case volume into monthly quantities; and, where a finding has to be documented for an inspector, Ask your compliance question.

Ordering for a clinic, a lab or a care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

Related Reading

Does every case of exam gloves have to carry an expiry date?

Where a device has an expiry date it must be printed, and a nitrile examination glove normally has one because the film and the packaging have a finite useful life. A case without any date is worth a question to the supplier before it goes into the cupboard.

Can a practice write its own expiry date on a box?

No. The date is the manufacturer's determination based on the shortest-lived component, and it does not reset when the case changes hands. The clinic can record when the box was opened, which is a different fact and does not extend the printed date.

Should opened boxes stay in the treatment room?

A working box can, if it is closed between uses and kept out of the splash zone, away from heat and out of direct sun. A case should not live there. The storage condition the manufacturer assumed is the one the expiry date describes.

How long does the clinic keep the receiving log?

At least as long as the supplier keeps the distribution record — the projected useful life of the device plus two years after shipment — because that is how long a recall question can arrive. Practically, keeping the current and previous year's log plus the invoices covers any stock the clinic still holds.

Is a bilingual label required on a glove case sold to a clinic?

The both-language minimum in the device labelling rules applies to devices sold to the general public; for professional use, the manufacturer must make directions in the other official language available on request. Workplace documents for hazardous chemicals are a separate obligation and those are expected in French in Quebec.

CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Already working with clinics? Become a regional representative.