Quick answer: before buying an LED device, a Canadian med spa should confirm the wavelength in nanometres, the irradiance at the treatment distance, the recommended session length, and what the manufacturer claims the device does. The last one matters commercially as well as clinically, because overclaiming turns a device purchase into an advertising risk. Our seven-colour LED face mask is specified for in-clinic and home use with published wavelength settings.
Which specifications decide whether a device is usable?
Four, and they interact. Wavelength determines which tissue interaction is being targeted. Irradiance determines how much energy arrives per second, and therefore how long a session must run. Distance determines how much of that irradiance reaches the skin. And coverage determines how many sessions a week the room can absorb.
| Specification | What to ask | Why it matters |
|---|---|---|
| Wavelength (nm) | Exact figure per mode | Different bands target different concerns |
| Irradiance (mW/cm²) | Measured at a stated distance | Sets a realistic session length |
| Session time | Manufacturer recommendation | Room scheduling and client comfort |
| Coverage | Treatment area per session | Throughput per treatment room |
What does the evidence actually support?
Evidence is strongest for use as an adjunct in wound healing and for modest improvements in skin appearance, and weaker for anything framed as a stand-alone treatment for a medical condition. That distinction should shape both the consent conversation and the marketing copy. A med spa that describes LED as supportive care alongside a professional treatment stays accurate; one that implies it resolves a condition is making a claim the device does not support.
What should the buying checklist include?
- Wavelength per mode, in nanometres, on the specification sheet.
- Irradiance figure with the distance at which it was measured.
- Session time and recommended course length.
- Eye protection supplied with the device.
- Electrical approval for sale in Canada.
- Warranty terms, and who services the unit in Canada.
- Written statement of intended use, suitable for staff training.
How should staff be trained and records kept?
Training should cover session setup, eye protection, what to do if a client reports discomfort, and the exact wording staff may use when describing outcomes. Keep a session log with device mode, duration and any adverse report. A printable device session log and the log generator are enough for a single room.
How does a device purchase fit a clinic's supply plan?
Devices are capital items, but the consumables around them — eye protection, wipes, aftercare masks — are recurring. Clinics buying for several rooms can review wholesale and multi-site ordering, and the B2B wholesale collection lists the treatment-room lines stocked for institutional buyers. Reselling? become a distributor.
Related reading
- LED Face Masks: Wavelength Guide
- LED Light Therapy: Red, Blue and Green Modes
- Medical Aesthetics Equipment Procurement for Canadian Clinics
Browse our medical aesthetics supplies.
Frequently Asked Questions
What wavelength should a med spa look for?
It depends on the concern being addressed. Ask for the exact nanometre figure per mode rather than a colour name, because colour names are not standardised.
How long should an LED session run?
Follow the manufacturer's recommendation for the specific device and distance. Session time is derived from irradiance, so it cannot be copied from another device.
Can a med spa say LED treats a skin condition?
Claims should match the device's stated intended use. Describing LED as supportive care alongside a professional treatment is accurate; implying it resolves a condition is not.
What should be logged per session?
Device mode, duration, eye protection used, and any client report of discomfort.
CliniEco Medical is a licensed medical device establishment (MDEL #35334).