Immunoelectrophoresis Equipment in Canada vs the US: Which Class Applies?

Graduated plastic specimen container with a screw cap on a dark background

Quick facts

  • Immunoelectrophoresis equipment separates serum proteins by electrophoresis and then develops them with an antiserum, so a protein such as an immunoglobulin can be identified by the arc its complex forms.
  • In the United States it files under 21 CFR 866.4500, Immunoelectrophoresis equipment, at Class I, product code JZS.
  • In Canada it is an in vitro diagnostic device; reading Part 2 of Schedule 1, it reaches Class I under Rule 8 as a standalone IVDD.
  • Where the equipment is intended to be used with a specific IVDD, Part 2 Rule 7 sets the class of both to that of the higher-risk member of the pair.
  • The gel, the buffer and the antiserum are the consumables the method runs on; the equipment is the migrating and developing instrument.
  • Entries, classes and product codes below were checked against the eCFR, the Regulations and the openFDA classification database on 2026-10-13.

Immunoelectrophoresis equipment is the instrument used to separate serum proteins in an electric field and then develop them with an antiserum. The method places the applied sample in a buffered gel, migrates the proteins at a set voltage, and applies an antiserum along a trough so that each protein forms a visible arc where it meets its antibody. The pattern identifies a protein such as an immunoglobulin and is used in the investigation of the immunoglobulins. In the United States it sits in a named regulation number at Class I; in Canada it is an in vitro diagnostic device that reaches the same class through the rules for other IVDDs. This article sets out both routes and the records the run supports, with the graduated specimen cups that carry the specimen to the bench.

What is immunoelectrophoresis equipment?

It is the apparatus that runs the two stages of the method. The first stage is electrophoresis: a sample is applied to a buffered gel and a voltage is applied across it, so the proteins migrate at rates that depend on their charge and size. The second stage is development: an antiserum is placed in a trough cut parallel to the migration, and it diffuses into the gel so that each protein forms a precipitin arc where it meets its antibody. The arcs are read and compared with the pattern the laboratory expects.

The equipment is the voltage source and the tank, the gel and buffer the run consumes, and the antiserum the method depends on. A modern laboratory may run the method in a semi-automated instrument with pre-cast gels and a defined protocol, but the two stages and the read-out are the same. The equipment is what supplies the separation and the conditions for development; the reagents are what the method runs on.

Graduated plastic specimen container with a screw cap on a dark background

Is immunoelectrophoresis equipment a Class I device in the United States?

Yes. 21 CFR 866.4500 is titled Immunoelectrophoresis equipment and the entry sits at Class I. The openFDA device classification API lists product code JZS (Electrophoresis Instrumentation) under that regulation number. A Class I device of this kind reaches the market under general controls — establishment registration, labelling rules and good manufacturing practice — rather than a premarket review of the individual instrument.

The regulation is written around the separation-and-development function, not the platform. A manual tank-and-power-supply set and a semi-automated instrument that runs the same two stages are described by the same number, because the class attaches to what the equipment does rather than to the degree of automation.

Item Detail
US regulation 21 CFR 866.4500 - Immunoelectrophoresis equipment
US class Class I (general controls)
Product code JZS (electrophoresis instrumentation)
Route to market Registration and listing; general controls
Sample Serum or another protein-bearing specimen applied to a buffered gel

How does Canada classify immunoelectrophoresis equipment?

Canada has no named entry, so the class is derived from Part 2 of Schedule 1 of the Medical Devices Regulations, which governs in vitro diagnostic devices. Rule 8 states: "If rules 1 to 7 do not apply, all other IVDDs are classified as Class I." Equipment used to separate and develop proteins for a diagnostic read-out — an IVDD in its own right, or an analyser that supports one — is not a transmissible-agent device (Rules 1 and 2) and does not carry a patient-management claim of its own (Rule 3), so the general Class I default of Rule 8 applies.

The rule that can move the class is Rule 7: "In cases where an IVDD, including its analysers, reagents and software, is intended to be used with another IVDD, the class of both IVDDs will be that of the IVDD in the class representing the higher risk." Where the equipment is intended to be used with a specific IVDD that carries a higher class — for example a kit whose claim reaches Class II or III — the equipment follows that higher class. A standalone instrument used with general-purpose reagents and read by the laboratory does not engage Rule 7, so it sits at Class I.

Item Canada United States
Named entry None; classified by rule (IVDD, Part 2) 866.4500, Class I
Class Class I (Part 2 Rule 8); higher class if paired under Rule 7 Class I (general controls)
Governing text Schedule 1, Part 2, Rules 7 and 8 21 CFR 866.4500
Route to market Establishment licence; no device licence for Class I Registration and listing
Would Rule 7 apply? Only where the equipment is used with a specific higher-class IVDD Not applicable
Rolls of paper medical tape stacked beside a single roll on a white surface

What separates this equipment from a clinical chemistry analyser?

The two are ordered by the same laboratory and can sit side by side, but they are different articles. A clinical chemistry analyser runs a menu of quantitative assays on a sample; immunoelectrophoresis equipment performs a separation and a development and yields a pattern. The class follows the intended use, so a device that reports a number and a device that produces a gel pattern are described separately.

Instrument What it produces Output type Class, Canada Class, US
Immunoelectrophoresis equipment Separated and developed protein arcs Pattern I (Rule 8) I (866.4500)
Clinical chemistry analyser Quantitative assay results Number II (Rule 4) for its IVDD menu 866.2900 range
Electrophoresis densitometer A scanned intensity profile of a gel Profile or number I (Rule 8) unless paired 866.4500 range

The detail worth carrying into a purchase order is the pairing. A laboratory that buys the equipment to run a kit with a higher-class claim should expect the equipment to follow that class in Canada under Rule 7, and should confirm the pairing on the labelling. A laboratory that buys the equipment for general use with its own reagents is buying a Class I IVDD and keeps the same record-keeping routine it keeps for the other Class I items on the bench.

What should a laboratory check before ordering one?

Three checks. First, confirm the exact regulation number and product code on the supplier's labelling. Second, confirm whether the equipment is intended to be used with a specific IVDD kit, because that pairing decides the Canadian class under Rule 7. Third, confirm the consumable line the method runs on — the gels, the buffer and the antiserum — so the equipment and the reagents are reconciled together rather than as separate purchases.

A protein-electrophoresis bench also reorders the specimen and bench consumables that move with the same sample line. The wider laboratory consumables range is listed under diagnostic laboratories. Clinics that stock for a whole practice can order through the wholesale programme and request a bulk quote for a standing or annual order; the graduated specimen cups sits in the same catalogue. Reselling? become a distributor.

How does the class affect a laboratory's routine?

The class sets the licence path; the laboratory's quality system sets the routine. An immunoelectrophoresis run is recorded with the specimen, the gel and buffer lot, the voltage and time of the migration, the antiserum lot and the pattern obtained, so a pattern can be traced back to the run that produced it. The lot records are the ordinary evidence a laboratory keeps under its quality system, where ISO 15189 sits.

Because the pattern is read by eye and compared with the expected appearance, the routine also depends on the two control materials included in the run and on the reference images kept with the method. None of that changes with the class; it is the ordinary routine a clinical laboratory keeps, and the record is what shows it was followed.

Sources

  1. openFDA device classification API
  2. Medical Devices Regulations, SOR/98-282, full text and Schedule 1
  3. Clinical and Laboratory Standards Institute
  4. Public Health Ontario, infection prevention and control
  5. ISO 15189:2022, medical laboratories, requirements for quality and competence
  6. World Health Organization
  7. US FDA, medical device databases
  8. US FDA, overview of device regulation
  9. Health Canada, medical devices
  10. Health Canada, establishment licensing
  11. Standards Council of Canada
  12. CSA Group
  13. ISO 13485:2016, medical devices quality management
  14. ISO 14971:2019, application of risk management to medical devices
  15. CCOHS, OSH answers
  16. Clinical and Laboratory Standards Institute, electrophoresis and immunology resources
  17. Health Canada, medical device licence application guidance

Printable record sheet. A protein-electrophoresis bench keeps a printed evidence copy of its run records, and a printable sheet is the copy that goes into the quality file. Open the sterilization log sheet library — the downloadable pack holds a steam-cycle log, a reprocessing-room checklist and an equipment-maintenance sheet. No account and no sign-up; print as many copies as your log needs.

Log generator. Enter the laboratory name, the instrument and the method once and the generator lays out a dated run sheet for the month. Run the sterilization log generator to build a dated, facility-labelled cycle sheet you can print or file straight into your quality manual.

Ask a compliance specialist. Whether an electrophoresis instrument is Class I or follows a higher class in Canada turns on the IVDD it is paired with; a written answer keyed to your instrument and province settles it. Ask a compliance specialist — you get a written answer specific to your equipment and province, with the regulation or standard it is based on cited.

Related reading

CliniEco Medical supplies eye care, laboratory and dental consumables of the kind described in this article. MDEL #35334. This article is written for optometry, laboratory and dental procurement professionals and is not legal advice; the class of a device and the records a practice keeps belong to the manufacturer and to the requirements that apply to it.

Frequently Asked Questions

What class is immunoelectrophoresis equipment in the United States?

Class I, under 21 CFR 866.4500, Immunoelectrophoresis equipment, product code JZS for electrophoresis instrumentation.

What class is it in Canada?

Class I, as an in vitro diagnostic device under Part 2 Rule 8 of Schedule 1 of the Medical Devices Regulations, unless it is paired with a higher-class IVDD.

When does the Canadian class rise?

Where the equipment is intended to be used with a specific IVDD, Part 2 Rule 7 sets the class of both to that of the higher-risk member of the pair.

What is the difference between this and a densitometer?

The equipment runs the separation and development; a densitometer scans the developed gel to produce an intensity profile. Both sit in the electrophoresis family, and pairing decides the Canadian class.

Are the gels and antiserum part of the device?

The reagents the method runs on are the consumables of the IVDD; the equipment is the instrument that supplies the separation and the conditions for development.

What else is immunoelectrophoresis called?

It is also written as IEP, immunoelectrophoresis, and protein electrophoresis with immunodiffusion development; the equipment regulation number describes the instrumentation.

Already working with clinics? Become a regional representative.