Infection control audits in Canadian clinics tend to open with the same handful of questions, and each one is really a request for a document. The auditor is not testing whether the team knows the rule; the auditor is testing whether the clinic can show the rule being followed on an ordinary Tuesday. This Q&A sets out the questions that come up most often and the record that answers each one.
The answers below are written for a clinic that reprocesses instruments. Where a spore test is named, the consumable is a
24-hour readout biological indicator, 50 per pack, but the audit question is about the record, not the brand.
| Audit question | Record that answers it | Where it lives |
|---|---|---|
| Show me your spore test results | Biological indicator log, one line per test with the sterilizer identifier | At the sterilizer |
| When was this unit serviced | Maintenance log with monthly entries, plus the last service report | Maintenance file |
| Walk me through reprocessing | Written procedure and a visible clean and dirty boundary | Reprocessing room |
| Show me your consumable storage | Dry storage away from the dirty area, with lot numbers on the shelf | Stock room |
| Show me the corrective action for a failed indicator | Written response: what failed, what was quarantined, what changed, date returned to service | Same log, deviation field |
What does an auditor ask about spore testing?
Question: show me your biological indicator results for the last three months.
What they are checking: that each sterilizer was tested on each day it was used, that the results are recorded with a date and a sterilizer identifier, and that a failed result has a documented response. A logbook with ticks but no sterilizer identifier fails the third check even if every tick is honest.
What answers it: a log with one line per test, the unit identified by a label that matches a sticker on the machine, the lot number of the indicator, the result, and the operator.
What does an auditor ask about the sterilizer itself?
Question: when was this unit last serviced and how do you know it is performing?
What they are checking: that maintenance is on a schedule rather than on failure, and that the clinic has cycle records showing the physical parameters. A service sticker with no cycle log answers half the question.
What answers it: the maintenance log with monthly inspection entries, the last service report, and the cycle records for the current month.
What does an auditor ask about instrument reprocessing?
Question: walk me through what happens to a used instrument from the chair to the shelf.
What they are checking: that cleaning happens before sterilization, that the clean and dirty flows are separated, and that staff can describe the sequence without prompting. This is the question where a clinic with good records and poor layout still gets a finding.
What answers it: a written procedure, a visible zone boundary, and staff who can explain the sequence. Keep the procedure short enough that it is read.
What does an auditor ask about the consumables?
- Where the pouches, indicators and tape are stored, and whether the storage is dry and away from the dirty area.
- Whether lot numbers are recorded, so a recalled batch can be traced to the loads it packed.
- Whether the sealer is checked, and what the check consists of.
- Whether single-use items are actually used once.
None of these require a new system. They require the stock to be in the right place and the record to exist.
What does an auditor ask that clinics fail most often?
The question that produces the most findings is the simplest: show me the corrective action for the last failed indicator. Clinics record results far more consistently than they record responses, and a failed spore test with no written response is a finding regardless of how quickly the problem was fixed. Write the response down at the time, even if it is three lines: what failed, what was quarantined, what was changed, and when the unit returned to service.
Related reading
- Infection control audit evidence binder for long-term care homes
- Spore test positive: what a clinic must do before using the load again
- How a Hamilton clinic group standardized sterilization logs across four sites
Download the printable sterilization log, or build one in a minute with the log generator. Work through the sterilization self-check before an audit. Ask a Compliance Specialist at the sterilization compliance desk. Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.
Frequently Asked Questions
What records does an infection control auditor ask for first?
The biological indicator log for the last few months, the sterilizer maintenance record, the reprocessing procedure, and the record of any failed indicator with its corrective action. Each answers a separate question.
How long should infection control records be kept?
Follow the provincial regulator and any licence conditions, and keep them at least as long as the patient record they could be matched to. Retention periods are not identical across provinces.
What is the most common infection control audit finding in clinics?
A failed indicator with no documented corrective action. Clinics record results consistently but often do not write down what was quarantined, what was changed and when the unit returned to service.
Does an auditor check storage areas?
Yes. Storage of clean supplies away from the dirty area, dry conditions, and separation of clean and soiled items are routine checks, and they are visible in a walk-through without any records.
CliniEco Medical is a licensed medical device establishment (MDEL #35334).