A Canadian clinic buying consumables has two channels in front of it: an importer that holds or brings in the product, and a distributor that carries a range and delivers it. The choice is not a loyalty question. Each channel carries a different cost structure, and the right answer depends on the volume of the line and how quickly the clinic needs it.
The difference is easiest to see on a line the clinic orders constantly. A 6 mil heavy-duty nitrile glove bought by the case can be quoted two ways, and the two quotes are not comparable until each is reduced to the same basis.
What does buying direct from an importer change?
Buying direct removes one layer of margin between the factory and the clinic, and it usually means the case price is quoted on the imported pack as it was built. The saving is real on a line the clinic uses steadily, because the same volume is bought with one fewer hand on it. What changes alongside the price is the service: storage, split delivery, individual item picking and account management may sit with the clinic rather than with the supplier, so the time spent on those tasks belongs in the comparison.
When is a distributor the better channel?
A distributor earns its place when the clinic buys a wide range of lines in small quantities, when it needs a single item the next day, or when it wants one account and one invoice across many products. Holding that breadth is what the distributor is paid for, and for a low-rotation item the margin is often smaller than the cost of importing a minimum quantity. A clinic that tries to buy every line direct ends up holding slow stock to justify the minimums, which is the cost the distributor was absorbing.
| Factor | Direct from an importer | Through a distributor |
|---|---|---|
| Price structure | Case price on the imported pack | Single-item price with a margin |
| Minimum order | Set by the carton or pallet | Usually low |
| Delivery speed | Depends on the shipment window | Often next-day on stocked items |
| Range | Narrow, single-line focus | Wide, many lines on one account |
| Services included | Limited; clinic holds more of the work | Storage, picking and account handling |
| Typical fit | High-volume repeating lines | Low-rotation and emergency lines |
How do you compare a landed cost against a listed price?
The direct price and the distributor price are not yet comparable, because the direct price excludes what it costs to get the goods onto the shelf. Adding the freight, any duty that applies and the cost of holding the stock produces a landed figure, and that landed figure is what should be put beside the distributor's delivered price at the same quantity. Where the two are close, the channel with the shorter lead time is usually the better choice, because the stock it avoids carrying has a cost of its own.
Which channel suits a multi-site account?
A multi-site account usually ends up splitting the two. The high-volume lines that repeat every cycle go direct, where the margin saving is largest, and the long tail of low-rotation items goes through a distributor, where the small-order handling is included. Keeping the split deliberate rather than accidental is what stops a clinic from holding a shelf of slow stock simply to reach a minimum. The split should be reviewed when the volume of a line changes, because that is when its channel decision should change with it.
How do you decide which lines to move between channels?
The lines worth moving direct are the ones with a steady, repeating volume, because the margin saving accumulates across every cycle. A line used twice a year does not repay the minimum quantity it forces. The practical measure is consumption per cycle: a line that is ordered at the same volume every month is a candidate, while a line whose quantity changes with the appointment mix is usually left with the distributor until the pattern settles.
When a line does move, keep the distributor account open for the low-rotation items and for the emergency order that arrives when a shelf runs out. A clinic that closes the account to save a margin often ends up paying more for the one urgent item than the margin saved across the year. The channel decision should be reviewed when the volume changes, not on a fixed date, because the volume is what the decision follows.
The buying-group angle is covered in how clinics buy through a group purchasing organization, and the pricing mechanics are in bulk versus case pricing on exam gloves. A bulk line that suits direct buying is the wholesale case of exam gloves, while a heavier single line is the 6 mil heavy-duty nitrile glove.
Related reading
The buying-group angle is covered in how clinics buy through a group purchasing organization, and the pricing mechanics are in bulk versus case pricing on exam gloves.
Frequently Asked Questions
What does buying direct from an importer change?
It removes one layer of margin, and it usually means the case price is quoted on the imported pack rather than on a repacked one. The trade-off is that supporting services such as storage, split delivery and account management may sit with the clinic instead.
When is a distributor the better channel?
When the clinic buys a wide range of lines in small quantities, needs next-day delivery on individual items, or wants one account and one invoice across many products. The distributor earns its margin by holding that breadth and absorbing the small-order handling.
How do you compare a landed cost against a listed price?
Add the freight, the duty where it applies and the cost of holding the stock to the direct price, then compare that figure against the distributor's delivered price at the same quantity. Comparing a bare case price against a delivered price is the mistake that makes direct buying look less costly than it is.
Which channel suits a multi-site account?
A multi-site account usually splits the two: high-volume repeating lines direct, and the long tail of low-rotation items through a distributor. That keeps the margin saving on the bulk lines without carrying the complexity of the slow ones.
Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.
Download the printable stock and order log, run the log generator to track par levels, request a 24-hour biological indicator 25-pack, or ask a sterilization compliance specialist to review your monitoring routine.
CliniEco Medical is a licensed medical device establishment (MDEL #35334).