How Much CPAP Accessories Pack Does a Canadian Clinic Use Per Month in Canada?

A CPAP accessories set laid out on a white background: a full-face interface with headgear, a coiled corrugated hose and two individually wrapped filters

Quick facts

  • A CPAP accessories pack is a set, not a unit dose: one pack usually covers a mask interface, a length of tubing and a filter kit for one patient.
  • The quantity a clinic issues per month is driven by the replacement interval of the slowest item in the pack, which is the mask interface at roughly one every three months.
  • In the United States those intervals are published as HCPCS-level usual maximums in a Medicare coverage determination: nasal interface once per three months, nasal cushions twice a month, disposable filters twice a month, tubing once per three months.
  • Canada publishes no equivalent national schedule. Intervals come from each manufacturer's instructions for use and from whoever is paying — a private insurer, a workers' compensation board or a provincial program.
  • A CPAP machine is a Class II device on both sides of the border, but the accessories travel on the machine's paperwork: in Canada, components of a licensed system are deemed licensed.
  • Filters are the item that breaks the arithmetic: they are consumed monthly while the mask and tubing are consumed quarterly, so a pack that bundles them has two reorder rhythms inside one box.

The question sounds like a stock calculation and is really a contract calculation. A clinic that dispenses CPAP supplies sells a service over years, and the pack is the unit of that service; the monthly quantity is whatever keeps the next appointment supplied without holding three years of inventory in a cupboard. This page sets out the intervals that decide the number, the American schedule that publishes them openly, the reasons the Canadian number is set differently, and the arithmetic that converts a patient list into a monthly order. The pack used as the worked example is the CPAP accessories pack with mask, tubing and filter kit.

What counts as one pack in the monthly arithmetic?

One pack is one patient's interface set. It is not one month of therapy, and treating it as one is where the arithmetic usually goes wrong. Inside the box the components have different lives: a mask frame is designed to survive several cushion changes, a hose is replaced on a quarterly rhythm, and a disposable filter is consumed in weeks.

That mismatch matters because a clinic that issues one pack a month per patient will over-supply the mask and under-supply the filter. The correct unit for planning is the patient-month, and the pack is what you issue when the patient-month coincides with a quarterly interface change.

Component in the pack Typical replacement rhythm Where the rhythm comes from
Mask interface (frame and cushion as a set) Quarterly Manufacturer IFU; in the US, the HCPCS usual maximum
Cushion or nasal pillows only Monthly to twice monthly Manufacturer IFU; in the US, the HCPCS usual maximum
Tubing Quarterly Manufacturer IFU; in the US, the HCPCS usual maximum
Disposable filter Twice monthly Manufacturer IFU; in the US, the HCPCS usual maximum
Headgear Every six months Manufacturer IFU; in the US, the HCPCS usual maximum
Water chamber, where a humidifier is in use Every six months Manufacturer IFU; in the US, the HCPCS usual maximum

What does the American replacement ceiling actually say?

The United States is the only one of the two markets where the intervals are published as a table with billing codes attached, which is why the numbers circulate so widely north of the border. The Medicare coverage determination for positive airway pressure devices sets a usual maximum for each accessory code, and the contractor-published attachment lists them line by line.

Item HCPCS code Usual maximum Annual ceiling for one patient
Full face mask, complete A7030 1 per 3 months 4
Replacement cushion for a full face mask A7031 1 per month 12
Cushion for a nasal mask A7032 2 per month 24
Nasal pillows, per pair A7033 2 per month 24
Nasal interface, with or without head strap A7034 1 per 3 months 4
Headgear A7035 1 per 6 months 2
Chinstrap A7036 1 per 6 months 2
Tubing A7037 1 per 3 months 4
Heated tubing A4604 1 per 3 months 4
Disposable filter A7038 2 per month 24
Non-disposable filter A7039 1 per 6 months 2
Water chamber for a humidifier A7046 1 per 6 months 2

Two things about that table are routinely misread. First, these are usual maximums, not entitlements — a supplier that ships to the ceiling for every patient without documenting a reason is shipping quantities that will be recouped. Second, the ceiling is per code, so the same patient can legitimately receive a complete mask once a quarter and a cushion every month in the same period; the two codes describe different objects.

The United States also imposes a refill discipline that has no Canadian equivalent: contact with the patient may begin no sooner than a set number of days before the current supply is expected to run out, delivery no sooner than a shorter window, no more than three months dispensed at a time, and no shipment without a documented affirmative response. That is a supply-chain rule dressed as a coverage rule, and it exists because auto-shipping was the abuse the determination was written to stop.

What does that arithmetic give per hundred patients?

The clinic-side model is built from the same intervals, applied to a patient list rather than to a claim. Two assumptions have to be stated, because everything else follows from them: that each patient is on therapy continuously, and that the clinic issues the full set once a quarter with filters replenished in between.

Line Per patient per month Per 100 patients per month Per 100 patients per year
Complete interface (one pack equivalent) 0.33 33 400
Disposable filters 2 200 2,400
Tubing (if supplied separately) 0.33 33 400
Headgear 0.17 17 200
Water chamber (humidified patients) 0.17 17 200

The first line is the answer in the form the question was asked: about 33 packs per month for every 100 patients on therapy, with filters running at roughly six times that rate. A clinic with 40 active patients issues 13 packs a month and consumes 80 filters; a clinic with 400 issues 132 packs and 800 filters.

That ratio is the reason a bundled pack needs a separate filter line in the requisition. If the pack contains two filters and the patient needs two a month, the pack lasts a month while the mask inside it lasts three — which means three packs are consumed for every interface change, and the pack is really a monthly item with a quarterly mask inside it. The arithmetic is only consistent once the clinic decides which of those two facts the pack represents.

How does Canada set the same intervals without a national schedule?

Canada does not publish a HCPCS-style table, and the absence is not an oversight: replacement frequency is a funding question here, not a licensing question. The regulator decides whether the device may be sold; the payer decides how often it will be bought again.

That produces three different rhythms that a clinic has to reconcile:

  • Manufacturer instructions for use, which are written for device performance and usually give a range rather than a date — a cushion "as needed or when the seal is lost", a hose "every three months".
  • Payer rules, which vary by insurer and by program. A private plan may mirror the American table; a provincial program publishes its own eligibility list; a workers' compensation board sets its own schedule.
  • Clinical judgement, which is what the clinic actually documents when a patient's seal fails early, and which is the only defensible basis for issuing ahead of the interval.

For a buyer, the practical consequence is that the Canadian answer to "how much per month" is contract-specific in a way the American answer is not. The same 100 patients can generate 33 packs a month under one plan and 20 under another, and neither number is wrong.

How do the two countries compare item by item?

Item Canada United States
Who publishes the replacement interval Manufacturer IFU, plus each payer's policy Medicare coverage determination, with a HCPCS-level usual maximum
Whether the interval is enforceable Contractually, through the payer Through claim edits and recoupment
Device licensing for the machine Class II; the manufacturer needs a medical device licence Class II; 510(k) required under the ventilator/positive pressure classification
Licensing for mask, tubing and filters Parts of a licensed system are deemed licensed; a separately sourced accessory carries its own status Cleared with the system, or under its own classification if separately marketed
Who may dispense Either party, subject to establishment licensing for import and sale A supplier enrolled with the payer; the clinic may bill or refer
Refill discipline None imposed by the regulator Contact and delivery windows, a three-month quantity cap, documented patient response
Typical clinic rhythm Quarterly set plus monthly filters, set by the payer Quarterly set plus monthly filters, capped by the schedule

The row that changes a buying decision is the fourth. In Canada, an accessory that is part of a licensed system inherits the system's licence — section 28 of the Medical Devices Regulations states that if a system is licensed, its components manufactured by the same manufacturer are deemed licensed for import, sale and advertisement. That is why a clinic can buy a mask or a hose for a licensed machine without a separate licence file, and why a third-party mask that is not part of any licensed system needs its own paper trail.

What does the pack do to cleaning and reuse?

A CPAP interface is a personal item, and the clinic's role is usually dispensing and instruction rather than reprocessing. The parts of the routine that matter for the monthly count are the ones that shorten a component's life:

  • Weekly washing of the mask and hose in warm water with mild soap, air dried away from sunlight, as the manufacturer's instructions state. A clinic that teaches this reduces premature replacement.
  • Daily emptying of the water chamber where a humidifier is used, and refilling with distilled water; a chamber run dry or filled with tap water is a chamber replaced early.
  • Filters are not washed. A disposable filter that has been rinsed is a filter that no longer filters, and the replacement count in the model above assumes it is thrown away.
  • No sharing. A mask fitted to one patient is not issued to another, whatever the cleaning routine says; the fit and the seal are patient-specific.
A CPAP accessories set laid out on a white background: a full-face interface with headgear, a coiled corrugated hose and two individually wrapped filters An adjustable care bed made up with white sheets and a blue-bordered underpad in a treatment room, the setting where a CPAP interface is fitted

Which pack contents drive the reorder rhythm?

Four decisions in the pack determine how the monthly number behaves, and each is worth writing into the specification rather than leaving to the next order.

Filter type. A disposable filter at two per month dominates the reorder frequency; a washable foam filter at one per six months does not. If the machine accepts both, the clinic is choosing between a high-frequency consumable and a low-frequency one, and the choice should be visible in the pack description.

Mask style. A nasal pillow interface and a full face mask have different cushion economics: pillows are replaced in pairs twice a month, a full face cushion once. The same patient list generates a different monthly quantity depending on which style dominates.

Tubing. Standard 6-foot tubing and heated tubing are both quarterly items, but heated tubing carries electronics and a connector that fails differently, and it usually cannot be substituted once a patient has been set up on it.

Headgear as a separate line. Headgear is a six-month item that is frequently forgotten until the straps stretch. Listing it separately in the pack keeps it in the annual count instead of turning it into an urgent order.

Clinics that dispense to a defined patient list usually price the whole set on an institutional account: the CPAP tubing, the hypoallergenic filter two-pack, the nasal pillow mask with cushion and frame and the humidifier water chamber are ordered on the same rhythm as the pack, which is why they are usually quoted together.

What should the requisition carry?

Five lines turn the model into an order that survives a change of purchaser:

  1. Patient count, active and on continuous therapy, with the date it was taken.
  2. Pack quantity at one per patient per quarter, expressed as a monthly figure so it can be compared with consumption.
  3. Filter quantity at the frequency the pack's filter type actually supports, not the frequency of the mask inside the pack.
  4. Headgear and water chambers as separate annual lines, so they are not absorbed into the pack count.
  5. The payer's interval, quoted, because it is the number an auditor will compare the invoice against.

A requisition that carries all five can be re-priced without re-deriving the model, and it answers the question a finance reviewer actually asks: not how many packs the clinic bought, but why that number is the right one for this patient list.

CliniEco Medical supplies respiratory consumables in Canada under MDEL #35334. This page describes procurement arithmetic and regulatory expectations; it is not a substitute for the manufacturer's instructions for use or for the terms of a specific payer contract.

Sources

  1. Medical Devices Regulations, SOR/98-282 — consolidated text (s.28, deemed licensed components)
  2. Medical Devices Regulations, Schedule 1 — classification rules
  3. Food and Drugs Act, R.S.C. 1985, c. F-27
  4. Health Canada — Medical devices
  5. Health Canada — Medical Devices Active Licence Listing (MDALL)
  6. CMS — Medicare coverage database, positive airway pressure devices (LCD L33718)
  7. Highmark — Attachment E-34, PAP accessory frequency table by HCPCS code
  8. 21 CFR 868.5905 — Ventilator, non-continuous (respirator), including PAP delivery systems
  9. 21 CFR 868.5580 — Oxygen mask
  10. openFDA — Device classification API
  11. FDA — Medical device classification database
  12. FDA — 510(k) premarket notification database
  13. Public Health Ontario — Infection prevention and control
  14. IPAC Canada — Practice recommendations for non-critical multi-use equipment
  15. CSA Group — CSA Z314:23, Reprocessing of medical devices in health care settings
  16. ISO 14971:2019 — Application of risk management to medical devices
  17. Ontario — Assistive Devices Program

The paper this page turns into an order — the issue log, the filter change sheet and the patient list snapshot — follows the same dated-sheet format used elsewhere in the clinic, and the printable version is in the free compliance log pack; if the clinic needs the month's sheet before a stock count, the sterilization log generator on that page prints a dated one in a couple of clicks.

Where the payer's interval and the manufacturer's instructions disagree, the reconciliation is a records question rather than a purchasing one, and it can be reviewed with the sterilization compliance consultation desk. Standing orders and multiple-patient pricing for a dispensing clinic are handled on the wholesale enquiry page. Reselling? become a distributor.

Related reading

Frequently Asked Questions

How many CPAP accessory packs should we order for 100 patients?

About 33 a month under a quarterly interface rhythm, which is one pack per patient per quarter. If the pack also carries the filters and the patient uses two disposable filters a month, the filter line is separate and runs at roughly 200 a month for the same 100 patients.

Does Canada have a published replacement schedule for CPAP supplies?

No. Health Canada licenses the devices; it does not set replacement frequency. The intervals come from each manufacturer's instructions for use and from the payer — an insurer, a provincial program or a workers' compensation board — and they differ between payers for the same device.

Can we copy the Medicare intervals into a Canadian contract?

You can use them as a reference point, and many private plans do, but they are not a Canadian standard. A contract that adopts the American table should say so explicitly, because the day a payer applies a different interval the invoice has no defence unless the governing rule was written down.

Do the mask and tubing need their own licences in Canada?

Not where they are components of a licensed system and were manufactured by that system's manufacturer — section 28 of the Medical Devices Regulations deems them licensed. A separately sourced accessory that is not part of a licensed system needs its own regulatory status, which is the question to put to the supplier.

How often should a CPAP filter be replaced?

Follow the filter type. A disposable filter is replaced at the interval in the manufacturer's instructions, commonly twice a month, and is never washed; a washable foam filter is replaced every six months and is rinsed between replacements. Mixing the two rhythms is the most common cause of an over-supplied or under-supplied filter line.

Who pays for the pack in Canada?

It depends on the patient: a private plan, a provincial program, a workers' compensation board, or the patient directly. Because the payer sets the interval, the same clinic can hold two different replacement rhythms for two patients on identical equipment.

Already working with clinics? Become a regional representative.