Contact Lens Solution and Case Stock: What One Patient Costs Per Year

Pair of blue nitrile examination gloves photographed on a white background

Quick facts

  • The AAO's contact lens care guidance says to replace the case at least every 3 months, or immediately if it is cracked or damaged, and to rinse it with sterile contact lens solution rather than tap water (page read 2026-10-21).
  • The same guidance says never to reuse old solution or add fresh solution to it, and that saline and rewetting drops are not disinfectants — a distinction that decides which bottle a practice hands out.
  • Lenses stored for 30 days or longer without re-disinfecting should not be worn, which is the rule that makes a case-and-solution kit a dated issue rather than an open-ended one.
  • In the United States the case and the care product are separately classified: a contact lens case sits at 21 CFR 886.5928, Class II, while rigid gas permeable care products sit at 886.5918, Class II (openFDA, read 2026-10-21).
  • ISO 14534:2011 sets safety and performance requirements for contact lenses, contact lens care products and accessories, and its scope excludes only the electrical safety of equipment used with them.
  • A 360 mL bottle filled to a 5 mL case daily lasts about 72 days, so a daily-wear patient needs roughly five bottles and four cases a year — the arithmetic behind every par level in this article.
  • Pages were read on 2026-10-21; the AAO page, the ISO catalogue entry and the openFDA classification API returned 200.

Solution is the item a fitting practice buys most often and counts least often. The bottle looks like a consumable, the case looks like a giveaway, and the annual quantity per patient is rarely written down, which is why the shelf is either empty in a busy month or carrying three years of a discontinued formula. This article does the arithmetic for a daily-wear patient, sets out what the AAO guidance requires of the case and the bottle, and turns both into a par level with an expiry rotation. The solution we stock is the CliniEco multipurpose contact lens solution, 360 mL; the numbers below are written so they can be recalculated for any bottle size a practice prefers.

How much solution does one daily-wear patient use in a year?

Take the case fill first. A standard lens case holds about 5 mL across two wells, and the AAO guidance is to use new solution each time the lenses are cleaned and disinfected, never to add fresh solution to the old. A patient who disinfects once a day therefore uses about 5 mL a day, or roughly 150 mL a month once the rub-and-rinse step is counted at another millilitre or two.

A 360 mL bottle at that rate lasts about 72 days. That is five bottles a year for a single daily-wear patient, before any spillage, any second pair, or any period of more frequent replacement during an infection. A practice that issues a bottle at each visit and a case every three months is issuing five bottles and four cases per patient-year.

The arithmetic is worth writing on the shelf label because it converts a vague "reorder when low" into a number. Twenty daily-wear patients on a three-month recall consume about 25 bottles and 20 cases a quarter. Forty patients double it. The same sum tells a practice what a two-for-one promotion actually costs: it is not the discount, it is the extra bottle on the shelf that expires before it is issued.

Item Per patient-year Basis
Multipurpose solution, 360 mL 5 bottles 5 mL/day case fill plus rub-and-rinse, 360 mL per bottle
Lens case 4 cases Replacement at least every 3 months per AAO guidance
Lens cloth or tissue Practice-dependent Not a substitute for solution; counted separately
Rewetting drops As prescribed Symptom-driven, not a disinfectant

Why is the case a separate stock line from the solution?

Because the case is where the biofilm lives, and because the guidance treats it as a replaceable item rather than a durable one. The AAO tells patients to rinse the case with sterile contact lens solution, not tap water, to leave it open to air dry, and to replace it at least every three months or immediately if it cracks. A case that is refilled every night and never dried is a wet surface with a lid, which is the environment the guidance is written to avoid.

In the United States the separation is also regulatory. A contact lens case is classified at 21 CFR 886.5928 as a Class II device, and a rigid gas permeable care product is classified at 886.5918, also Class II, with product code MRC. Two device lines, two sets of labelling, two entries in a purchasing file — which is why a practice that orders "contact lens supplies" as one line cannot answer which of the two it has on the shelf.

For the practice the practical consequence is that the case belongs in the same reorder cycle as the solution, not in the drawer with the trial lenses. If the case is given out only when a patient asks, the three-month replacement advice in the AAO guidance is never actually delivered, and the practice has a written standard it does not follow.

Pair of blue nitrile examination gloves photographed on a white background

What does the guidance say about topping off, water and saline?

Four sentences from the AAO guidance do most of the work in a practice. Never reuse old solution, and never add fresh solution to what is left in the case — the fresh solution added to old is diluted by the old, and the case never gets a full-strength disinfecting cycle. Do not use saline solution or rewetting drops to disinfect lenses — they are not disinfectants, whatever the label's comfort claims. Do not rinse or store lenses in water, tap or sterile, and never use a homemade saline solution. And never put contacts in the mouth to wet them, because saliva is not sterile.

Those four sentences are also the content of the conversation at the dispensing visit, and they are the reason a practice should stock the three products as three distinct lines rather than as one "solution". A patient who buys saline because it costs less has bought a rinsing agent, not a disinfecting system, and the practice that sold it has supplied the first half of a corneal infection.

The 30-day rule sits alongside them. If lenses have been stored for 30 days or longer without re-disinfecting, the AAO guidance is not to wear them until they have been re-disinfected. In a practice that keeps a trial set or a spare pair in a case, that rule sets a rotation: the case is dated when it is filled, and a case that has been sitting for a month is emptied and refilled before it is used.

Which format fits which patient?

Multipurpose solution is the default for a daily-wear soft lens patient who will follow a rub-and-rinse routine. Hydrogen peroxide systems suit patients who need a preservative-free regimen but require their own case and a neutralising step, so they cannot be stocked as a substitute for the multipurpose bottle. Rigid gas permeable care is a third line with its own products, and the US classification reflects that with a separate code.

The stock decision follows the patient mix rather than the catalogue. A practice that fits mostly daily disposable lenses issues less solution and more cases than one that fits monthly lenses, because the daily-disposable patient still needs a case for the occasional overnight and a bottle for rinsing. A practice that fits orthokeratology or RGP lenses carries a different set entirely.

Patient type Solution line Case Annual issue at one visit per quarter
Daily-wear soft, monthly replacement Multipurpose 360 mL Standard case, 4 per year 5 bottles, 4 cases
Daily disposable Multipurpose for rinsing and emergencies Case for occasional storage 1–2 bottles, 4 cases
Preservative-sensitive Peroxide system with its own case System-specific case Per system instructions
Rigid gas permeable RGP care products RGP case Per manufacturer instructions

How should the shelf be rotated and reordered?

Date the bottle when it is received, not when it is opened, and put the newest behind the oldest. Solution has a shelf life and an in-use life, and the two are different numbers: a bottle that has been open for months is not made new by its printed expiry date. Write the in-use discard date on the bottle at the dispensing visit if the practice dispenses a bottle that will be opened that day.

Set the reorder point from the arithmetic rather than from the look of the shelf. If the practice has 30 daily-wear patients on a quarterly recall, the quarter's draw is about 38 bottles and 30 cases; a reorder point of one month's draw, with a lead time written beside it, keeps the shelf from running dry in the week before a recall run. The same sum sizes the wholesaler case: a 12-bottle case is about two and a half patient-years at the rate above.

Keep the case and the solution in the same rotation. A shelf with three years of cases and three weeks of solution is a shelf that will issue a case with no bottle, which is the combination the AAO guidance warns against. The reorder list should treat them as a pair, even though they are separate device lines.

Clear graduated specimen container with a white screw cap, marked in ounces and millilitres

What belongs on the dispensing record?

Record the product name and format, the bottle size, the date issued, the case issue and the next replacement date, and the instruction that was given — rub and rinse, never add to old solution, replace the case in three months. That is enough to answer a question six months later about what a patient was actually using when a problem started.

Where a practice dispenses a trial or a sample, record that too. A sample bottle that is not on the record is a bottle whose in-use date nobody knows, and the patient will bring it back to the next visit as their current supply. The record is also the place to note a switch of format, because a patient moving from multipurpose to peroxide needs a new case and a new instruction, not just a new bottle.

The record does not need to be elaborate. A line in the clinical note with the four fields above, plus a tick for the instruction given, is more useful than a separate log that nobody completes. What it must be is consistent, because the value of the record is in the comparison across visits.

Solution and cases are reordered together because they are issued together, and the par level is set from the patient count rather than from the look of the shelf. Order through the wholesale programme for case pricing and an account, or become a distributor for resale. The multipurpose contact lens solution, 360 mL sits in the same catalogue.

Sources

  1. American Academy of Ophthalmology, contact lens care
  2. American Academy of Ophthalmology, how to use eye drops
  3. American Academy of Ophthalmology, eye exam
  4. ISO 14534:2011, contact lenses and contact lens care products
  5. US 21 CFR 886.5928, contact lens case (eCFR via Cornell LII)
  6. US 21 CFR 886.5918, rigid gas permeable contact lens care products
  7. openFDA device classification API
  8. FDA device classification database
  9. Health Canada, medical devices
  10. Health Canada, establishment licensing
  11. Medical Devices Regulations, SOR/98-282
  12. College of Optometrists of Ontario, infection control
  13. Canadian Association of Optometrists
  14. Public Health Ontario, infection prevention and control
  15. ISO 13485:2016, medical devices quality management
  16. CliniEco Medical, multipurpose contact lens solution 360 mL

Give the three-month case rule something to hang on. The compliance log centre carries a free printable dispensing slip that records the bottle size, the case issue date and the next replacement date, so the patient leaves with the date in writing. No account and no sign-up.

The sterilization log generator on the same page will build a dated issue sheet for the lane, which a practice can use to keep the solution and case lines on one reorder cycle instead of two.

Ask a compliance specialist — written answer specific to your equipment and province, with the regulation or standard it is based on cited: sterilization compliance consultation.

Related reading

CliniEco Medical supplies contact lens solution and clinic consumables in Canada under MDEL #35334.

Frequently Asked Questions

How many bottles of solution does one patient use a year?

About five 360 mL bottles for a daily-wear patient who disinfects once a day. A case fill is roughly 5 mL, the rub-and-rinse step adds a little more, and a 360 mL bottle therefore lasts about 72 days. The figure moves with the bottle size and with how faithfully the patient discards rather than tops off.

How often should a lens case be replaced?

At least every three months, or immediately if it is cracked or damaged. The AAO guidance also says to rinse the case with sterile contact lens solution rather than tap water and to leave it open to air dry between uses.

Can saline or rewetting drops be used to disinfect lenses?

No. The AAO guidance states that saline solution and rewetting drops are not disinfectants. They can rinse or comfort, but they do not replace the disinfecting step, and a patient who uses them as a substitute has no disinfecting cycle at all.

What does the 30-day storage rule mean for a practice?

Lenses stored for 30 days or longer without re-disinfecting should not be worn until they have been re-disinfected. For a practice that keeps a trial or spare pair in a case, that means dating the case when it is filled and emptying and refilling it before use if it has been sitting for a month.

Are a lens case and a care product regulated separately?

In the United States they are separately classified: a contact lens case is a Class II device at 21 CFR 886.5928, and rigid gas permeable care products are Class II at 886.5918. That is why they appear as two lines in a purchasing file and two entries in a device inventory.

What is a sensible reorder point for solution?

One month of draw, with the supplier lead time written beside it. If 30 daily-wear patients are on a quarterly recall, the quarter's draw is about 38 bottles and 30 cases; a reorder point of about 13 bottles keeps the shelf covered without carrying a year of stock that will expire.

Already working with clinics? Become a regional representative.