In Ontario the monthly number is not set by patient volume. It is set by a sentence in the provincial reprocessing checklist: the sterilizer is tested with a biological indicator in a process challenge device on each day it is used, and with each type of cycle used that day. Everything else in the clinic starter bundle — 1,000 gloves, 200 pouches, three tape rolls — scales with patients. Only the 25 indicators scale with the rule, which is why an Ontario clinic usually runs out of indicators first.
How many spore tests does an Ontario clinic run per month?
Count using days, multiply by the number of cycle types used on those days, then add one control indicator for each day that routine indicators are incubated.
| Cycle types used per day | Test indicators, 20-day month | Control indicators | Total indicators | Boxes of 25 |
|---|---|---|---|---|
| 1 | 20 | 20 | 40 | 2 |
| 2 | 40 | 20 | 60 | 3 |
| 3 | 60 | 20 | 80 | 4 |
| 2, with implant loads on 8 days | 40 plus 8 in-process | 20 | 68 | 3 |
The last row is the one clinics under-budget. A biological indicator in a process challenge device also goes into every load containing implantable devices, and those devices are not released until the result is available — an extra test per implant load, above and beyond the daily per-cycle count. A practice that places implants twice a week adds eight indicators a month before any other change.
The indicator itself is specified by ISO 11138-3:2017, and the wider reprocessing programme that consumes it by CSA Z314:23. The control logic is separate and easy to miss: a control from the same lot, unexposed to sterilant and incubated according to the manufacturer's instructions, is consumed on each day that routine indicators are incubated. That is one per day, not one per cycle type, which is why the total column grows by twenty rather than by forty in the two-cycle row.
What does a three-operatory dental clinic consume in a month?
A worked example, with the assumptions written down so they can be replaced with the clinic's own figures.
| Line | Assumption | Month (20 operating days) |
|---|---|---|
| Patients | 24 per day across three operatories | 480 visits |
| Gloves | Two pairs per visit | 960 gloves ≈ 1 case |
| Instrument sets | 20 sets per day | 400 pouches ≈ 2 boxes |
| Loads | 6 loads per day, 2 cycle types | 120 loads |
| Indicators | Daily per cycle type, plus controls | 60 indicators ≈ 3 boxes |
| Tape | One strip per wrapped tray, 2 trays per day | 40 strips ≈ a fraction of one roll |
The shape of that table is the answer to the monthly question: one glove case, two pouch boxes, three indicator boxes, and tape that will not need replacing for a quarter. Two bundles carry the gloves, pouches and tape for about a month and a half, but only reach two-thirds of the indicator need — which is the arithmetic that catches most first orders.
How many gloves does each operatory consume per month?
Per-chair consumption is the number to give a purchasing manager, because staff and chairs move independently.
| Patients per chair per day | Pairs per day | Gloves per month per chair | Chairs covered by one case per month |
|---|---|---|---|
| 6 | 12 | 240 | 4 |
| 8 | 16 | 320 | 3 |
| 10 | 20 | 400 | 2.5 |
| 12 | 24 | 480 | 2 |
At eight patients a chair a day, three chairs use 960 gloves a month and one case covers the clinic. The same three chairs at twelve patients each use 1,440 and need a case and a half — and since a case is a single size, that half case is really a second case in a different size, not a fraction of one.
How long does one box of 25 indicators last?
| Cycle types used per day | Indicators per using day | Using days per box of 25 | Calendar weeks at five using days |
|---|---|---|---|
| 1, with control | 2 | 12.5 | About 2.5 |
| 2, with control | 4 | 6.25 | About 1.2 |
| 3, with control | 5 | 5 | 1 |
A two-cycle-type clinic is opening a new box of 25 roughly every six working days. That is the operational fact behind the monthly count: the indicator box, not the glove case, is the item that has to be watched weekly, and a reorder point expressed in months will always be too late for it.
What records does an Ontario month have to produce?
Quantity and documentation are linked, because the log is what turns a count into evidence. The provincial standard requires that the daily operation of every sterilizer be reviewed and documented in a log book, and that the log be maintained for at least 10 years from the date of the last entry in that record. The reprocessing checklist adds the result side: the test indicator and its control are incubated and read, and the load release decision is recorded against them.
For a purchasers' purpose the consequence is simple: the indicator count on the order and the log lines in the book have to match. A clinic that tests twice a day and logs once a week will fail the reconciliation long before it fails an inspection.
Is the monthly count the same in the United States?
No, and the difference is the cadence rather than the products.
| Question | Ontario | United States baseline |
|---|---|---|
| Minimum cadence | Each day used, each cycle type used that day | At least weekly per sterilizer, per the CDC recommendation |
| Control indicator | Daily, from the same lot, unexposed | Same principle, on the days tests are run |
| Implant loads | A test indicator in every implant load, devices held until the result | Same principle under the federal recommendation |
| Indicators per month, 2 cycle types | About 60 | About 4 |
Two clinics with identical patient volume therefore order indicators at a ratio of roughly fifteen to one, while ordering gloves at the same rate. A Canadian buyer comparing a quote with an American price list is usually comparing a two-week indicator supply with a five-month one.
Related reading
- How many spore tests a Canadian clinic needs in a year
- Nitrile glove par levels: cases per chair per month
- Glove usage per chair per month in a three-chair clinic
Frequently Asked Questions
How many indicators does an Ontario clinic use in a month?
Twenty test indicators and twenty controls at one cycle type, forty and twenty at two cycle types, on a twenty-day month. Implant loads add one test indicator each beyond the daily count.
Why do controls count against the box?
A control from the same lot, incubated unexposed on each day that routine indicators are incubated, is a second indicator consumed that day. Budgeting only the tests leaves the box short by one unit per using day.
How many glove cases does a three-chair clinic use per month?
About one case at eight patients a chair, and about one and a half at twelve. Because a case is one size, the half case is really a second case in a different size.
Do the pouches in the bundle cover a month?
One box of 200 pouches covers roughly ten working days at twenty instrument sets a day, so a three-operatory clinic typically needs two boxes a month.
Does the daily cadence also apply to a single-cycle clinic?
Yes. The requirement attaches to each day the sterilizer is used, and the per-cycle-type multiplication only bites when a second cycle type is introduced.
Set the reorder point in days
The compliance log centre carries the load and indicator sheets that let a clinic reconcile an order with its log, and the sterilization log generator builds a per-sterilizer record with the fields an inspector asks to see. Where a clinic wants its own cadence, cycle types and reorder point checked against what the province expects, the compliance consultation desk is the route; institutional accounts and standing orders go through the account enquiry page. Reselling? become a distributor.
CliniEco Medical distributes clinic consumables in Canada under MDEL #35334. This page restates requirements published by Public Health Ontario and the Royal College of Dental Surgeons of Ontario and compares them with the CDC recommendation, with all figures checked on 11 November 2026; the arithmetic is a worked model with stated assumptions, and the requirement that binds a specific clinic is the one in its provincial rules and its own written policy.