Can a Canadian Clinic Import Gloves and Gowns Directly? Licence, Duty and Liability
A clinic manager in Mississauga opens a US price list and finds examination gloves quoted at roughly two-thirds of the Canadian distributor price for a comparable case. The arithmetic looks obvious until the second page, where the seller notes that the buyer is responsible for import clearance.
That sentence moves the job. Buying from a Canadian distributor is a purchase. Buying from a foreign seller is an import, and an import carries duties that belong to the importer rather than the seller — including the one most clinics never expect: reporting a problem to the regulator yourself.
None of that makes direct importing wrong. For a large site or a multi-clinic group buying by the pallet it can be the right call — provided the clinic knows what it is signing up for before the first carton is booked.
Can a Canadian clinic import gloves and gowns directly?
Yes. The Medical Devices Regulations do not stop a clinic from buying abroad, and they do not force every purchase through a Canadian distributor. What they do is attach conditions to the act of importing, and the conditions depend on who the clinic is in the chain.
The three lines a clinic actually buys are gloves, gowns and masks, and the specification matters more on an import order than on a domestic one, because there is no Canadian supplier standing between the clinic and the factory. A CliniEco Medical nitrile examination glove, 3.5 mil, 1,000 gloves per case can be checked against a written specification at receiving. A case with no specification behind it can only be checked against the photograph that was on the website.
That is why most small clinics keep buying locally even when the import quote is lower. The cost of a purchase is the invoice; the cost of an import is the invoice plus verification work, and the verification work does not show up until someone asks a question.
Who counts as the importer under the Medical Devices Regulations?
The importer is the party bringing the device into Canada, which in a direct purchase is the clinic. That sounds definitional until you follow it through section 44.
Subsection 44(1) prohibits importing or selling a medical device unless the person holds an establishment licence. Subsection 44(2) then lists who is exempt, and 44(2)(b) names health care facilities. Subsection 44(3) adds the duty that is easy to miss: a person who imports must ensure that the person they import from holds an establishment licence. Subsection 44(4) narrows that for devices bought from the manufacturer itself, but it does not remove it for devices bought from a trading company.
Two consequences follow. A clinic buying for its own rooms is exempt from holding the licence, but it is not free to buy from anyone: the seller needs a licence, or needs to be the manufacturer. A clinic that starts reselling to another practice, or supplies a partner site under its own account, moves into a distribution position that section 44(1) does cover.
The gloves that clinics buy from a Canadian distributor arrive with that chain already documented. The Aurelia Protégé nitrile examination gloves, 4.0 mil, in a 1,000-glove case are sold under an establishment licence, which is the part of the price that does not appear on the quote. Gowns work the same way: the SMMS 40 gsm Level 2 isolation gown, 50 per pack has a level on the label that a buyer can test against a standard, not just against a photograph.
| Party | Establishment licence under section 44 | Distribution records under section 52 | Incident reports under section 59 |
|---|---|---|---|
| Manufacturer | Required to sell in Canada | Required | Required |
| Importer | Required, unless the facility exemption applies | Required unless exempt as a facility | Required |
| Distributor | Required | Required | Not named |
| Retailer | Exempt under 44(2)(a) | Exempt under 52(2)(a) | Exempt from recall provisions by section 63 |
| Health care facility, own use | Exempt under 44(2)(b) | Exempt under 52(2)(b) | Facility importing its own stock is the importer for section 59 |

Which licence does the clinic need, and when is a health care facility exempt?
The exemption in section 44(2)(b) is written for facilities, not for buyers in general. It applies to the importation or sale of a medical device by a health care facility, and it says nothing about how the facility acquires the device, which is why the licence check in 44(3) still lands on the facility when the seller is a foreign trading company.
Where a clinic intends to import, the cleanest structure is to buy from a licensed Canadian establishment and let that party carry the import, which keeps a Canadian licence holder between the clinic and the border. Where a clinic imports itself, the file it needs before the first shipment is short: section 45 asks for the establishment's name and address, whether it imports or distributes or both, and the manufacturers whose devices it handles.
A clinic that expects to keep importing usually applies for the licence rather than arguing about the exemption, because it makes the seller conversation simple and removes the annual question of whether this year's purchases still fit.
What has to be on the label before the goods can be sold in Canada?
Section 21(1) is the checklist, and it applies to imports as much as to domestic sales: no person shall import or sell a medical device unless the device has a label setting out the required information. That includes the name of the device, the name and address of the manufacturer, the device identifier, an indication of contents where those are not readily apparent, and the specific words the regulations require where a claim is being made about the device.
The receiving check is simple and rarely done. Compare the manufacturer's name and address on the carton with the manufacturer named on the invoice and on the seller's licence file. When those three disagree, the usual cause is that the seller is a trading company and the label was printed for another market. Symbols add a second check: ISO 15223-1:2021 is the reference for symbols used with information supplied by the manufacturer, and a symbol a Canadian receiver cannot read is one that gets ignored on the floor.
What happens to record-keeping and incident reporting once you import?
This is the part that surprises clinic owners, and the strongest argument for paying a distributor.
Section 52(1) requires the manufacturer, importer and distributor of a medical device to each maintain a distribution record. Section 52(2) exempts retailers, and exempts a health care facility for devices distributed for use within that facility. So a clinic importing for its own rooms is not required to keep a distribution record in the section 52 sense — but if it transfers stock to a sister site, that exemption becomes a question rather than an answer.
Subsection 59(1) puts the reporting duty on the manufacturer and the importer, for incidents in Canada that involve the device, are related to a device failure or a deterioration in effectiveness or an inadequacy in labelling or directions for use, and led to death or a serious deterioration in health or could do so if repeated. A clinic that imported the stock is the importer for that purpose. The reports are preliminary and final, and the clock starts when the incident comes to the importer's attention.
Section 63 is the mirror image, and reading the two together is what makes the point. Retailers and health care facilities are exempt from the recall provisions in sections 63.2, 64 and 65 for devices distributed for use within the facility. The clinic that imports is therefore outside the recall machinery but inside the reporting duty, which means the obligation to say something travels with the shipment and the power to compel a correction does not.

What duty, tax and brokerage applies at the border?
The landed cost has four lines the foreign quote leaves out.
| Cost line | What it is | How to check it before ordering |
|---|---|---|
| Tariff duty | Assessed on the classification of the goods and the origin claimed | Confirm the classification with a broker using the current Customs Tariff |
| Origin documentation | Proof supporting a preferential rate | CBSA Memorandum D11-4-2 sets out proof of origin requirements |
| Brokerage and clearance | The fee for filing the entry, plus any examination charges | Ask the seller who is the importer of record and who pays the broker |
| Currency and payment | The spread between the quoted currency and the card charge | Price the order in Canadian dollars on the day it is paid |
The origin line changes outcomes. Memorandum D11-4-2 covers proof of origin, and D11-4-3 covers the most-favoured-nation rules that apply when no preferential claim is made. A supplier who says the goods are duty-free without naming the tariff treatment is describing a hope, not a rate.
There is also a question under the duty question: whether the carton holds what the entry says. A shipment declared as examination gloves that contains a heavier gauge, a different polymer or a different pack count is a classification problem and a specification problem at once, and the clinic is the party holding the entry.
How do you compare a landed cost with a Canadian distributor price?
Compare monthly spend, not case price, and put the four border lines into the same column as the invoice.
A clinic running three treatment rooms at roughly 30 patient contacts a day uses gloves at a volume that makes a 40 percent case-price gap look meaningful. The same clinic loses that advantage the first time a shipment sits at a broker for a week and it buys two emergency cases locally to keep the rooms open. The comparison that survives contact with operations is: landed cost per month, including the emergency purchase, against distributor cost per month, with lead time stated in weeks.
Gowns follow the same logic with a different volume curve. A site that uses a gown only for close-contact care will not spend its way to a freight advantage, while a site running procedures will. That is a question about the site's own numbers, and the wholesale and institutional supply desk answers it in the same currency the import quote uses.
What goes wrong most often on a first import?
- The seller turns out to be a trading company with no Canadian establishment licence, which puts the section 44(3) check on the clinic after the money has left.
- The label names a manufacturer that does not match the invoice, usually because the carton was printed for another market.
- The clinic accepts a private-label offer and quietly becomes a manufacturer under section 1 rather than an importer.
- Nobody records the lot numbers on receipt, so a later problem cannot be traced to a shipment.
- The order is priced per case and compared per case, which hides the broker fee and the currency spread until the card statement arrives.
What is the sensible structure for a clinic that wants both?
Most clinics end up mixed, which is reasonable: move the high-volume, low-complexity lines through a licensed Canadian establishment that carries the border work, and buy the low-volume, high-specification lines from a supplier that already holds the documentation. The first group is gloves in case quantities. The second is anything where the specification has to be defended — a gown with a level on the label, a mask with a standard named.
The reason to split them is that the exempt positions are narrow and the reporting duty is not. Keeping imports inside a licensed chain keeps the clinic's own file short. A clinic that becomes an importer should write the receiving procedure before the first shipment, not after the first problem.
Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.
Running a family practice or a multi-site clinic group? See the clinic supplies page for family practice for the lines that move fastest at the front desk and in the treatment room.
References
- Medical Devices Regulations (SOR/98-282), section 1, interpretation (checked 12 November 2026)
- Medical Devices Regulations (SOR/98-282), section 21, label requirements (checked 12 November 2026)
- Medical Devices Regulations (SOR/98-282), section 44, establishment licence (checked 12 November 2026)
- Medical Devices Regulations (SOR/98-282), section 45, licence application contents (checked 12 November 2026)
- Medical Devices Regulations (SOR/98-282), section 52, distribution records (checked 12 November 2026)
- Medical Devices Regulations (SOR/98-282), section 59, mandatory problem reporting (checked 12 November 2026)
- Medical Devices Regulations (SOR/98-282), section 63, exemptions from recall provisions (checked 12 November 2026)
- Food and Drugs Act (R.S.C., 1985, c. F-27), consolidated text (checked 12 November 2026)
- ISO 13485:2016, Medical devices, quality management systems (checked 12 November 2026)
- ISO 15223-1:2021, Symbols used with information supplied by the manufacturer (checked 12 November 2026)
- ISO 374-5:2016, Protective gloves against micro-organisms (checked 12 November 2026)
- ISO 22609:2004, Medical face masks, resistance to penetration by synthetic blood (checked 12 November 2026)
- ASTM D6319, Standard specification for nitrile examination gloves (edition page listed as historical at the date checked) (checked 12 November 2026)
- Canadian Centre for Occupational Health and Safety, Glove selection and use (checked 12 November 2026)
- Canada Border Services Agency, Import commercial goods into Canada (checked 12 November 2026)
- Canada Border Services Agency, Memorandum D11-4-2, proof of origin of imported goods (checked 12 November 2026)
- Canada Border Services Agency, Memorandum D11-4-3, most-favoured-nation rules of origin (checked 12 November 2026)
- Public Health Agency of Canada, Routine Practices and Additional Precautions (2013 guidance) (checked 12 November 2026)
Receiving paperwork: the printable compliance log and checklist library includes receiving sheets and lot-tracking pages, so an import shipment can be signed off against the invoice and the label rather than remembered.
Working out monthly volumes? The clinic supply and cost planner converts patient contacts into boxes per month and a monthly CAD figure, which is the number an import quote has to beat.
Related Reading
- GST/HST on Medical Supplies in Canada: What Buyers Pay
- How to Choose Nitrile Gloves for a Canadian Clinic: A Selection Matrix
- Isolation Gowns in Ontario: Where to Buy by the Case and Price per Gown
- Requisition to Purchase Order: Documenting Clinic Supply Purchases for Audit
Frequently Asked Questions
Can a Canadian clinic legally import gloves and gowns for its own use?
Yes, and the provision that matters is section 44. Subsection 44(1) requires an establishment licence to import or sell a medical device, while 44(2)(b) removes that requirement for a health care facility. The same section then adds a second duty in 44(3): anyone importing must make sure the party they import from holds an establishment licence, with the exceptions listed in 44(4). Buying for the clinic's own use is the straightforward part; the licence check on the seller is where first-time importers get caught.
What licence number should a clinic ask a foreign seller for?
Ask for the seller's Canadian establishment licence number and check it against the licence holder's own identification, not the invoice letterhead. Section 44(3) puts the check on the importer, and section 45 shows what a licence application contains: the establishment's name and address, whether it imports or distributes, and the manufacturers it handles. A seller who cannot produce that is not a lawful source for a Canadian import.
Does importing change a clinic's record-keeping duties?
It can. Section 52(1) requires the manufacturer, importer and distributor of a medical device to each maintain a distribution record, and 52(2) exempts retailers and health care facilities that distribute devices for use within the facility. A clinic importing for its own rooms stays inside that exemption for records, but the facility is now the importer for reporting purposes, and section 59 puts a duty on the importer as well as the manufacturer to file preliminary and final reports on incidents that occur in Canada.
What happens if a glove batch fails after the clinic imported it?
The clinic reports it. Section 59(1) applies to the manufacturer and the importer where an incident involving a device sold in Canada is related to a failure, a deterioration in effectiveness or inadequate labelling or directions for use, and led to death or serious deterioration in health or could do so if repeated. Section 63 exempts facilities from the recall provisions, which is why section 59 matters: an exemption from recall powers is not an exemption from saying something went wrong.
Can a clinic put its own brand name on imported gloves?
It can, and it should read section 1 before doing so. The definition of manufacturer turns on selling a device under your own name or a trademark you own or control while being responsible for designing, manufacturing, assembling, processing, labelling, packaging or refurbishing it. A private-label arrangement can move a clinic or a buying group into the manufacturer role, which carries the full set of manufacturer obligations rather than the lighter importer set.
Is duty the same on every glove shipment?
No. Duty depends on the tariff classification and on the origin claimed, which is why CBSA treats proof of origin as its own document trail. Memorandum D11-4-2 covers proof of origin, D11-4-3 covers the most-favoured-nation rules, and a preferential claim needs its own certification rather than a supplier's word. Two identical cartons can land with different duty outcomes if one carries a valid origin claim.
How do you compare a landed cost with a distributor price?
Compare monthly spend, not case price: add duty, brokerage, the currency spread and the internal hours to the invoice, then compare against the distributor's monthly figure with lead time stated in weeks.
What should a clinic ask for before discussing price?
Three documents: the seller's establishment licence number, a label specimen that meets section 21, and the manufacturer's name and address as printed on that label.
Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).