CliniEco 24-Hour Biological Indicator Incubator - 24-well dry block, 56-60 C held to 0.5 C, LCD control

Incubateur d'indicateurs biologiques 24 h, bloc sec 24 puits

SKU CLI-INC-24 · CliniEco Medical
$379.00$391.00
In stock · ships from Toronto, ON
Dry-block incubatortype
24wells
8.8 mmwell diameter
24 hoursincubation time
Pack sizeSingle configuration Single configuration
Health Canada licensed importer & distributor · MDEL #35334 · Ships from Toronto
Free shipping across Canada — included

Specifications

TypeDry-block incubator
Wells24
Well diameter8.8 mm
Incubation time24 hours
UseBiological indicator incubation
Bench-topYes
SKUCLI-INC-24

Pricing

OrderUnit price
1 unit$379.00 CAD
Case and carton prices are in the size table below
Request quote for clinic and volume orders
Volume pricing is quoted per order — most quotes go out within one business day.
Read the full product guide 13 sections · specs, use, compliance

Which biological indicator vials seat properly in this dry block?

The block is machined with twenty-four wells of eight point eight millimetres across, cut to the outside diameter of a self-contained spore ampoule, so a standard tube drops in flush and the aluminium wall carries heat the whole length of the vial. A wider cap will not enter the well at all, and an undersized tube sits loose with an air gap around it, which is the usual reason one indicator in a batch reads late. Anything used here has to be read at 56 to 60 degrees C, the growth band for Geobacillus stearothermophilus; the 24-hour spore test ampoules match that well format and that temperature window.

24-hour biological indicator incubator: block, power and order facts as listed
Property Value
Type Dry-block biological indicator incubator, 24-hour read
Temperature zone 56–60 °C, held to ±0.5 °C
Wells 24, machined aluminium block
Well diameter 8.8 mm, matched to standard spore ampoules
Vial compatibility Self-contained ampoules, G. stearothermophilus ATCC 7953
Records LCD temperature display with USB data export
Power 100–240 V AC external adapter, 50/60 Hz
Sold as One bench unit, not a case pack
SKU CLI-INC-24
Warranty Two years

Is one unit the right order, or does a clinic buy a case of them?

A case pack does not exist for this device: it leaves as a single bench unit with its external adapter, so the SKU on the invoice is one machine and a busy office usually stops there. The reprocessing bench is where incubation happens, not each operatory, so four chairs sharing one sterilizer need one block and a second one only when a second sterilizer sits in another suite. Buying two units for redundancy sounds prudent until both sit half full and neither is ever the one an auditor asks to see.

How many wells does a three-sterilizer office fill in a working week?

Count one well per sterilizer per day it is run. Three sterilizers across a five-day week is fifteen wells, a six-day week is eighteen, and a 24-well block still holds six seats for the re-test that follows a failed indicator and for the extra run after a holiday closure. That spare room is the practical reason the block is sized above a single day's load: a failure on Friday afternoon cannot wait for Monday if the block is already full. Offices that want a same-shift answer pair this block with a rapid reader, or step down to a one-hour readout indicator and read it in the reader at the bench.

Print the daily record sheet from the spore log and record centre, work out how many indicators a week of clinics consumes with the sterilizer run planner, and put a procedure question to the sterilization compliance desk. Districts consolidating several sites order through the clinic ordering desk.

CliniEco 24-Hour Biological Indicator Incubator — Precision Dry-Block, 24 Wells

Distributed in Canada by CliniEco Medical, Toronto, under MDEL #35334.

CliniEco 24-Hour Biological Indicator Incubator

Daily sterilization monitoring made simple — audit-ready for Ontario dental clinics

Why Your Clinic Needs This

Ontario regulations (RCDSO/PHO) require DAILY biological monitoring of sterilizers. Our 24-hour incubator gives you reliable, in-office spore testing with precision temperature control — at a fraction of the cost of major brands.

💡 Precision dry-block incubation — ±0.5 °C accuracy with LCD display, in a compact 24-well format.

🛡️ Built to Clinical Standards — Inside This Incubator

🌡️ ±0.5°C Precision Heating

PID-controlled dry-block heating element with NTC temperature sensor holds a stable 56-60°C incubation zone — critical for accurate BI growth and reliable results.

🔧 Machined Aluminum Block

CNC-machined aluminum heating block with 24 precision wells (φ8.8 mm, matched to standard BI vial outer diameter), ensuring consistent thermal contact across every vial.

⚙️ Industrial-Grade Control

Microcontroller-based temperature control with real-time LCD display and USB data export — audit-ready records for RCDSO inspections.

🔌 Robust Build & Support

100–240 V AC external adapter (50/60 Hz), 2-year warranty, Toronto-based support with Canadian distribution under MDEL #35334.

✅ 2-Year Warranty

Specifications

Type Dry-block biological indicator incubator (24h)
Temperature 56-60°C (±0.5°C precision)
Wells 24 wells (φ8.8 mm, matched to standard BI vial diameter)
Compatibility Self-contained BI ampoules (G. stearothermophilus ATCC 7953)
Display LCD temperature display
Data USB data export (optional record software)
Power 100-240V AC 50/60Hz
Certifications
Warranty 2-year warranty

Why CliniEco

  • Precision: ±0.5 °C dry-block control held across all 24 wells
  • No lock-in: works with any standard 56-60 °C BI ampoules
  • Audit-ready: pair with our free printable record sheets
  • Made for Canada: 110V/60Hz, EN/FR labeling, Toronto-based support

Sold on its own

Our 24-hour indicators start at $2.80 each in the 25-pack, and the price per strip drops as the pack size goes up.

Shop the 25-pack

Biological indicator packs priced for this block

The block holds twenty-four wells of 8.8 mm, so the 24-hour self-contained ampoule is the format it was machined for; the fluorescence formats below are listed because they need the same bench space but a different readout device. Prices are per pack in CAD, and the cost per test is the pack price divided by the number of tests inside it — no quote required (MDEL #35334).

Item Pack / format Price (CAD) Cost per test Order
24-hour self-contained BI 25-pack $69.99 $2.80 24-hour self-contained biological indicator, 25-pack
24-hour self-contained BI 50-pack $109.99 $2.20 24-hour self-contained biological indicator, 50-pack
24-hour self-contained BI 100-pack $189.00 $1.89 24-hour self-contained biological indicator, 100-pack
CliniEco 24-hour dry-block incubator 24 wells $379.00 — CliniEco 24-hour biological indicator incubator, 24 wells
1-hour fluorescence BI (needs the reader) 50-pack $269.99 $5.40 1-hour fluorescence biological indicators, 50-pack

Which formats fit this block: the 24-hour self-contained ampoule drops straight into the 8.8 mm well and incubates at 56–60 °C; a fluorescence indicator of 1 hour, 3 hours or 20 minutes has to be read in the 4-well fluorescence reader instead, so it belongs on the same bench but not in this block. A cap wider than the well will not enter it, and an undersized tube sits loose with an air gap, which is the usual reason one vial in a batch reads late.

Stock and shipping: orders ship from Ontario, Canada, and the exact dispatch date is confirmed with you before the order is released — we do not quote a delivery date at checkout. Every indicator pack carries its lot number, so the entry in your monitoring log can be traced back to the batch.

Have a question about your own facility? Send it in and you will get a written answer specific to your setup, with the regulation or standard it is based on cited. Ask your compliance question.

Related tests in this BI line

Related articles

Common questions

Does this incubator meet Ontario sterilization monitoring requirements?

Yes. The RCDSO requires a biological indicator to be tested for each sterilizer on every day it is used. This 24-hour dry-block incubator holds the 56-60 degrees C range that biological indicators need, so daily in-office spore testing can be run without sending samples to an outside lab.

How many biological indicators can it hold at one time?

Twenty-four wells. A single-operatory clinic running one sterilizer typically uses one well per test day, so the capacity covers several days of monitoring before any repeat run is needed.

How stable is the incubation temperature?

The PID-controlled dry-block heating element works with an NTC temperature sensor to hold a stable zone within plus or minus 0.5 degrees C. Stable temperature is what makes the colour change on a biological indicator readable, so drift is the main cause of inconclusive results.

Can I export records if a regulator or auditor asks for them?

Yes. The unit has an LCD display and USB data export, so incubation records can be moved off the device and kept with your other sterilization logs rather than transcribed by hand.

What arrives with the incubator?

The incubator itself, plus 25 biological indicator spore tests included at no charge. That is roughly 12 monitoring days for a single sterilizer, so monitoring can start on day one instead of waiting on a separate indicator order.

This model is no longer stocked — what replaced it?

It has been replaced by the DLAB HB105-S1 Dry-Bath Incubator with Lid — 20 wells in one heating block, cTUVus certified (TÜV Rheinland certificate CU 72205506 0001), 115 V AC — which is the model we currently stock and ship. The current model's price, full specification and certificate details are on its product page.

What power supply does it require?

The current model, the DLAB HB105-S1, runs on 115 V AC 50/60 Hz with a North American plug. The unit also has overheating protection and a PT1000 external sensor input.