CliniEco Face Mask — ASTM Level 2, 3-Ply, 50 per Box or 500 per Case
Ships to Canada only
Specifications
| Rating | ASTM F2100 Level 2 |
|---|---|
| Construction | 3-ply: outer spunbond, melt-blown core, inner soft layer |
| Fluid resistance | 120 mmHg |
| SKU | CLI-MASK-L2-500-CASE |
| Brand | CliniEco Medical |
| Category | Face Protection |
| Availability | In stock |
Pricing
| Order | Unit price |
|---|---|
| 1 box | $37.00 CAD |
| Case and carton prices are in the size table below | |
| Request quote for clinic and volume orders | |
Read the full product guide 11 sections · specs, use, compliance
Ships as Aurelia 2120 — the same mask, made in Quebec, at a lower price. CliniEco masks are supplied by Supermax Healthcare Canada (Aurelia) to the identical ASTM F2100 Level 2 specification: BFE > 99.9%, PFE 99.8–99.9%, differential pressure 3.8–4.5 mm H₂O/cm² and 120 mmHg fluid resistance. You receive the local Canadian-made product in its original packaging — nothing is rebranded, relabelled or changed.
How many masks does a 500-mask case put in front of a two-chair room?
Work from chair-hours rather than from the case. A two-chair practice that changes mask between patients, on a ten-patient-day each chair, draws about twenty masks a day across the two rooms, so a 500-mask case is roughly a month of clinical wear before staff breaks, reprocessing and the spares kept at the front desk are counted. The case is ten boxes of fifty, which lets each operatory hold its own box instead of one box travelling between rooms — the arrangement that keeps the box that has been open the shortest time in front of the patient. Where a procedure tray needs masks that go out individually wrapped rather than pulled from a box, that is a separate listing: the individually wrapped 3-ply 50-pack.
What does ASTM F2100 Level 2 actually set — filtration, fluid resistance, breathability?
Four figures, and the level is the combination of them. On this listing the mask is stated at BFE ≥ 98% and PFE ≥ 98%, fluid resistance at 120 mmHg, and differential pressure under 4.0 mm H₂O/cm². The fluid-resistance figure is what separates Level 2 from Level 1 and what matters in a room where splashes and spray are routine; the differential pressure figure is the breathability side, and it is the number staff feel by the end of a shift. A mask can meet one of those figures and miss another, which is why the level is quoted as a set rather than as a single headline number.
Which retention suits a procedure room — ear loops or tie-on?
The listing ships with latex-free elastic ear loops and a malleable aluminium nose strip, which is the format that goes on and off between patients without a knot to retie. Tie-on masks hold position longer under a shield or loupes, and they are the choice in rooms where a mask stays on through a long procedure. Neither retention changes the filtration figures; what changes is how often the mask is adjusted by a gloved hand. Where the room mixes both situations, keep a box of each and let the procedure decide. Where a task calls for a higher barrier tier than this listing states, the next step up in the same 3-ply build is the ASTM Level 3 mask.
| Attribute | Value as listed |
|---|---|
| Rating | ASTM F2100 Level 2 |
| Construction | 3-ply: outer spunbond, melt-blown core, inner soft layer |
| Bacterial filtration | BFE ≥ 98% |
| Particle filtration | PFE ≥ 98% |
| Fluid resistance | 120 mmHg |
| Differential pressure | Below 4.0 mm H₂O/cm² |
| Retention and fit | Latex-free elastic ear loops, malleable aluminium nose strip |
| Packaging | 50 masks per box; case of 10 boxes, 500 masks |
| Supply | Supplied as Aurelia 2120, made in Quebec, original packaging |
Masks are a par-level item, not a guess: the printable consumption and stock count sheet turns a month of boxes into a reorder figure, and the clinic supply planner sizes that figure against chair count. Product documentation, including the level statement behind the figures above, comes from the product documentation desk; multi-room and multi-site quantities are quoted at the clinic ordering desk.
CliniEco Medical distributes these masks in Canada under MDEL #35334.
Product Overview
Face masks are the most-used PPE item in healthcare — and one of the most overpriced when sourced from major distributors. CliniEco Face Masks — 3-Ply ASTM Level 2 provide the bacterial filtration efficiency (BFE > 99.9%), fluid resistance, and breathability required for low-risk procedural use, at a price point that is 30–50% lower than Medline and Cardinal Health. Designed for comfort during extended wear, these masks feature a soft inner layer, a melt-blown filter core, and adjustable nose strips for a secure seal. For Canadian hospitals, clinics, and dental practices looking to reduce procurement costs without compromising on ASTM-rated protection, CliniEco delivers.
Key Features
- ASTM F2100 Level 2 Rated: Independently tested (Nelson Labs PRB22172-SUP01) to BFE > 99.9%, PFE 99.8–99.9%, differential pressure 3.8–4.5 mm H₂O/cm² and 120 mmHg fluid resistance — suitable for procedures with splash and spatter risk.
- 3-Ply Construction: Outer spunbond polypropylene layer, middle melt-blown filter core, and inner soft-touch layer — providing three distinct barriers against droplets and splatter.
- Adjustable Nose Strip & Contoured Fit: Built-in malleable aluminum nose strip conforms to the nasal bridge, reducing fogging on eyewear and ensuring close facial seal.
- Comfort-Focused Design: Latex-free ear loops with gentle, non-binding elasticity — safe for extended shifts without irritating the ears.
- Low Breathing Resistance: Optimized airflow at ΔP < 4.0 mm H₂O/cm² ensures comfortable wear for hours, even during high-census clinical days.
- Institutional pricing: Available in cases of 50 boxes (2,500 masks) at a lower per-mask price than single boxes, with same-day shipping from Canadian warehouses.
Specifications
| Product Name | CliniEco Face Masks – 3-Ply ASTM Level 2 |
| Rating | ASTM F2100 Level 2 |
| Layers | 3-Ply (outer spunbond + melt-blown core + inner soft layer) |
| BFE | ≥ 98% |
| PFE | ≥ 98% |
| Fluid Resistance | 120 mm Hg (Level 2) |
| Differential Pressure (ΔP) | < 4.0 mm H₂O/cm² |
| Ear Loops | Latex-free, non-binding elastic |
| Nose Strip | Malleable aluminum |
| Color | Blue (standard); white available on bulk order |
| Packaging | 50 masks/box — 4 boxes per order (200 masks) |
| UPC | 9260528009438 |
Applications
- Hospitals & General Wards: Standard isolation, patient rounding, and non-heavy-duty clinical procedures.
- Dental Practices: Routine cleanings, s, and chair-side assistance where fluid splash risk is low.
- Outpatient Clinics & Walk-In Centers: Triage, vaccination clinics, and patient interaction in communal waiting areas.
- Long-Term Care & Assisted Living: Daily staff and resident protection in communal living environments.
- Home Healthcare & Community Care: Visiting nurses, home health aides, and community paramedicine programs.
B2B Ordering – Why Buy from CliniEco?
CliniEco is the cost-conscious choice for Canadian healthcare procurement teams. Our ASTM F2100 Level 2 masks match the specifications of Medline, Halyard, and 3M — at 30–50% less per unit. With dedicated Canadian inventory and direct institutional support, we help you reduce PPE spend without reducing protection.
Ready to equip your facility at a lower cost?
- Request a quote at clinieco.com
- Call our wholesale team: 1-800-CLINIECO
- Email: alina@clinieco.ca
Choose CliniEco face masks — ASTM Level 2 protection, 30–50% less than Medline.
Related Reading
Learn more about choosing and using this product category:
- PLA Surgical Masks: Eco-Friendly Face Mask Options for Canadian Clinics
- PLA Biodegradable Surgical Masks: The Future of Sustainable PPE for Canadian Healthcare
- Bulk Surgical Masks for Canadian Clinics: How to Calculate Your Annual Supply
Have a question about your own facility? Send it in and you will get a written answer specific to your setup, with the regulation or standard it is based on cited. Ask your compliance question.
Related Guides
Learn how to choose and use this product correctly:
Related articles
- Mask Pleats and Ear Loop Welds: What Surgical Mask Construction Decides
- The Nose Clip on a Surgical Mask: Fit, Fogging and Why It Fails by Noon
- Tie-On or Ear Loop Masks: Which Retention Suits the Room, and What ASTM F2100 Leaves Out
- Surgical Masks in Canada: Case Pricing and Par Levels for Dental Clinics
