Estimate the consumables a clinic, lab or care home reorders most: wound care and dressings, gloves and PPE, surface disinfection, first aid, and treatment-room supplies. Enter your own figures and each planner returns a monthly quantity, the number of whole packs or cases to order, and a monthly cost in CAD.
Every planner runs in your browser. There is no account to create and no email address to enter — the estimates are planning tools for budgeting and stock control, not clinical advice, and every figure can be changed to match your site. Prices are our website retail prices in CAD and exclude tax and shipping.
How many pairs of examination gloves does a clinic use in a month?
Gloves are consumed by task, not by patient, so the count starts from how many times hands are gloved in a day rather than how many people walk in. A workable planning formula is: clinical encounters per day x gloves donned per encounter x clinical days per month. In a treatment room a single encounter typically involves two donning events (one for the procedure, one for clean-up and turnover), and any additional task such as handling a contaminated instrument or cleaning a surface adds another pair.
A worked example: twenty encounters a day, two pairs each, twenty-two clinical days, gives eight hundred and eighty pairs a month. Because boxes are counted in gloves rather than pairs, that is one thousand seven hundred and sixty gloves, or roughly nine hundred-glove boxes. The planner on this page performs that multiplication for you and rounds the result up to whole boxes.
Two variables move the number more than anything else. The first is thickness: a six-mil nitrile glove is chosen for tasks with mechanical stress such as instrument handling, cleaning and heavy-duty turnover, while a lighter examination glove suits short contacts where tactile feel matters more. If you stock one thickness for everything you will either over-spend on short contacts or split gloves during the tasks that matter. The second is size mix: a clinic whose staff are mostly one size will run out of that size long before the boxes are empty. A common planning split for a mixed clinical team is roughly one part small, four parts medium, four parts large and one part extra-large, adjusted to the team you actually have.
| Supply family | What the monthly quantity is driven by | Planning unit | What makes the estimate swing |
|---|---|---|---|
| Examination gloves | Donning events per day, not patients | Boxes of 100 | Thickness, task mix, size split |
| Surface disinfection | Room turnovers plus session start and end | Canisters or litres of concentrate | Contact time, technique, open-canister loss |
| Sharps containers | Sharps-generating procedures | Containers per room | Fill line reached faster than expected |
| Wound dressings | Dressing changes, split primary and secondary | Packs per size | Treatment length, change frequency |
| First aid stock | Expiry and use, not headcount | Kits per area | Items expiring inside ninety days |
| Sterilization consumables | Sterilizers x cycle types x use days | Indicators and pouches | Number of cycle types run per day |
How much surface disinfection does one treatment room use per month?
Count wipes per room turnover, not per room. Each patient turnover touches the same set of high-touch surfaces: chair controls, light handle, bracket table, suction hoses, countertop and the drawer or door handles used during the appointment. One wipe per treated surface set per turnover is the working figure, plus a second pass at the start and end of each clinical session for surfaces that are not touched between patients.
For a room running twenty encounters a day, plan roughly forty to forty-four wipes a day, which is about nine hundred a month. If you use a concentrate with reusable cloths instead, the quantity changes but the binding constraint does not: the contact time printed on the product label is what determines whether a surface was disinfected. A surface wiped and immediately dried has been cleaned, not disinfected, and re-wiping to make up for it doubles consumption without adding protection. The pattern is common enough that we reviewed it as a case review of wipe contact-time failure.
Two operating rules protect both the estimate and the outcome. Keep the disinfectant closed between uses, because an open canister loses strength as the carrier evaporates. And never top up a canister with fresh wipes: the residue on the bottom is what the next wipe picks up.
How many sharps containers does a clinic go through?
The trigger for changing a sharps container is the fill line, not the calendar: close and replace when it reaches three quarters full, because a container packed past that point is where needlestick injuries happen. That makes the monthly count a function of how many sharps your procedures generate rather than how many patients you see.
As a planning range, a small single-chair room with light sharps use will fill a one-gallon container in about four to eight weeks, while a multi-chair clinic running injections and suture work will fill the same size in two to four weeks. The number to plan from is the count of sharps-generating procedures per week, and the number to protect is one spare container per room. A full container that has nowhere to go stops a procedure, and the workaround people invent under time pressure is the exact behaviour the container exists to prevent.
How much wound care dressing does a post-operative week consume?
Dressings are planned in dressing changes, not in patients. Take the number of wounds under active management, multiply by the number of changes per wound per day, then by the number of days in the treatment course. A single wound managed with one change a day for two weeks consumes fourteen changes; multiply that by the pack size to get packs, and round up.
Split the estimate into two layers, because the two layers move independently. Primary dressings touch the wound and are consumed per change. Secondary dressings hold the primary in place and are often changed less often, so a clinic that orders them in the same proportion as primary dressings ends up short on one and long on the other. Keep the two counts separate on the requisition and the variance will tell you which one is drifting.
One more planning note: a dressing that is changed more often than the wound requires consumes supplies, nursing time and skin. If consumption is climbing while patient volume is flat, the first question is whether the change frequency is still what the treatment plan says, not whether the order quantity is wrong.
What first aid stock should a clinic hold, and how often is it checked?
Half-life matters as much as quantity here: the largest single cause of a useless first aid stock is expiry, not shortage. The working minimum for a clinical site is a stocked kit in each treatment area plus one at reception, containing sterile dressings in two sizes, adhesive dressings, gauze, tape, gloves, a CPR barrier, saline for irrigation, scissors, forceps, a thermometer, and a current list of emergency contacts and the site address written where a caller can read it aloud.
Check monthly and log three things per check: what was used since the last check, what expires within ninety days, and what was stored in the wrong place. Replace on use rather than at the annual review, because a kit that is restocked once a year is empty for eleven months. Provincial requirements for workplace first aid vary, and your insurer may set a higher standard than the province does, so treat this list as a working minimum and reconcile it against your own obligations.
How do I turn a monthly estimate into a reorder point?
A monthly estimate tells you what to buy; a reorder point tells you when. The formula is average daily use x supplier lead time in days, plus safety stock. Safety stock is clearest when expressed as a share of the lead-time demand rather than as a fixed number of cases: hold about a quarter of lead-time use for items with more than one source, and about half for items that come from a single supplier.
A worked example: four hundred units a month is about eighteen a day. With a ten-day lead time that is one hundred and eighty units in transit, plus safety stock of forty-five to ninety, so the reorder point sits between two hundred and twenty-five and two hundred and seventy units. Set the reorder point on the units actually on the shelf, not on units ordered, or you will place a second order while the first is still in transit and find both on the same delivery.
| Item profile | Safety stock | Working cover | Case size to prefer |
|---|---|---|---|
| Fast mover, more than one source | About a quarter of lead-time use | One to one and a half months | Case, with a fixed reorder point |
| Single-source item | About half of lead-time use | Up to two months | Case, and keep the buffer shelf separate |
| Slow mover or clinician preference | One pack | Under one month | Pack, never case |
| Dated sterile item | None beyond one spare | Dating minus treatment length | Smallest pack that covers the course |
What does months of cover mean, and why does it matter more than order size?
Months of cover is the units on hand divided by monthly use. It is the number that tells you whether a large order was a saving or a storage problem, and it is the number to put in front of whoever signs the purchase order. For bulky items the working band is one to one and a half months, because cases of gloves, underpads and canisters take up shelf space that clinics rarely have spare. For single-source items the band can go to two months, because the cost of running out is a stopped procedure rather than a delayed top-up.
Order size and cover are not the same decision. Buying a larger case size lowers the number of orders placed per year, but it also pushes cover up. If cover is above two months on an item you use steadily, the case size is the thing to change, not the order frequency. For a worked quarterly sizing exercise on a different supply family, see sizing a quarterly order.
How much storage space does a month of supplies actually take?
Measure the shelf before you approve the order. Record shelf width, depth and height for each storage location, then count cases rather than units: a month of gloves for a twenty-encounter clinic is nine boxes, which stacks in under half a shelf, while a month of underpads for a thirty-bed unit is a case that needs floor or low-shelf space and cannot be lifted onto a high shelf safely.
Three rules keep storage from turning into waste. Heavy items go low and light items go high. Nothing sits directly on the floor, because floor-level moisture is what ruins paper and cloth packaging. And each location carries a label naming the item, the pack size and the date the case was opened, so the person restocking does not have to open three boxes to find out which one is partial.
Which items should a small clinic not buy in case quantities?
Buy fast movers in cases and slow movers in packs. Our wholesale and facility accounts page sets out how case-level ordering and site accounts work. The pattern is consistent: examination gloves, wipes and the dressing sizes used daily justify case quantities, while items that follow one clinician's preference, seasonal items, and anything sterile with a date on it do not. A case of a slow-moving size is not a saving; it is stock that reaches its date before it reaches a patient.
The test is simple: if you cannot state how many months of cover a case represents for that item at your current volume, the case is too large. Nothing in this rule is about the item being unimportant. It is about the rate at which you consume it.
How do I plan supplies for a second chair or a new treatment room?
Split the existing estimate into per-chair items and shared items before you add anything. Per-chair items scale with the room: gloves, wipes, bibs, surface covers, impression materials, suction tips, and the sharps container. Shared items do not scale linearly: disinfection concentrate, first aid stock, backup instruments and the sterilization consumables tied to the autoclave all step up in proportion to load rather than to room count.
A practical approach is to add the per-chair items at one hundred percent and the shared items at fifty to seventy percent for the first month, then correct against actual draw-down at the end of that month. Planning the shared items at a full second share tends to leave a clinic holding a second autoclave-load of pouches it will not use for a quarter.
How do I reconcile the estimate against what we actually used?
Count the draw-down once a month, on the same day, for the same items. The comparison that matters is estimated use versus actual use per item, and the response depends on the size and direction of the gap. A variance under twenty percent is normal drift and needs no action. A variance above twenty percent on a fast mover means something changed in the clinic, and it is worth finding out which of three things it was.
The three usual drivers are patient volume, technique, and waste. Volume shows up across every item at once. Technique shows up in one family, for example a change in how often surfaces are wiped or how many gloves are used per procedure. Waste shows up as expiry, damaged packaging or open cases behind other stock. Fixing the number without identifying the driver just moves the error to the next order.
What records should back up a supply order?
Keep five fields per line item: item name and pack size, quantity ordered, the date received, the lot number for anything that is traceable, and the storage location it went to. The fifth field is the one clinics most often skip and the one that saves the most time, because a lot number without a location cannot be used to pull stock quickly.
Keep the same record for items you use in regulated processes, because that is what makes a recall or a batch question answerable without a search through paper; the printable compliance log covers the sterilization side of the same idea. For a small site a single spreadsheet with those five columns, updated when stock is received rather than when it is used, is enough, provided the person who receives the delivery is the person who writes the line.
How do I plan for seasonal demand and temporary closures?
Two related pages carry the rest of this work. The sterilization compliance hub collects the indicator, pouch and record requirements in one place, and if you would rather have the requirements read against your own process, the compliance consultation is where that starts. Sterilization consumables are ordered the same way as anything else on this page: one biological indicator for each sterilizer, on every day it is used, for each type of cycle, with a control test alongside each run.
Two different problems that get solved in the same place. For episodic demand such as a flu season or a vaccination campaign, add a buffer of one to two weeks of cover on the items that campaign consumes, and take it back down when the campaign ends. For a planned closure, reduce the standing order rather than pausing it, and check nothing sterile is left with insufficient dating to survive the gap.
The trap in both cases is the same: an order placed on habit continues to arrive. If the site will be closed for two weeks and the standing order ships weekly, the right action is a written change to the next two deliveries, not a note to remember to skip them.
Frequently asked questions
How do I estimate monthly supply needs for a clinic, lab or care home?
Multiply the number of patients, procedures or rooms by the consumables used, then by the number of days. Each planner on this page does that for you and lets you change every figure to match your site.
How is the monthly cost calculated?
The planner divides the monthly units needed by the pack or case size and rounds up to whole packs, because orders are placed in whole packs. It uses our website retail prices in CAD and does not include tax or shipping.
Which pack and case sizes can we order?
The product list in each planner shows the pack or case size we currently stock and its retail price. For a size that is not listed, use the wholesale and facility account page and we will confirm availability.
Can we order several product families on one account?
Yes. Clinics, labs and care homes commonly order dressings, gloves, disinfection and treatment-room consumables together. Volume pricing applies across the order.
Are these estimates clinical advice?
No. They are planning estimates for budgeting and stock control only, based on the figures you enter. Adjust them with your own consumption records.
Do you supply clinics, labs and care homes across Canada?
Yes. CliniEco Medical supplies clinics, labs, long-term care homes and home-care programs across Canada. For account setup and volume pricing, email alina@clinieco.ca.
How many biological indicators does a clinic need per year?
One biological indicator is required for each sterilizer, on every day it is used, for each type of cycle — and each daily run also carries a control test (RCDSO). It is a daily requirement, not a weekly one. Multiply your use days by the number of cycle types and by the number of sterilizers: a clinic open five days a week running one cycle type on one sterilizer is looking at five indicators plus five controls every week. This planner applies that multiplication so the quantity sits on the requisition instead of being discovered the week the box runs out.
Which sterilization pouch size should we stock?
Two sizes, not one: a small pouch for single instruments (handpieces, scissors, probes) and a large pouch for trays and hollow items. Leave enough room that the instrument never touches either seal, and enough width that the paper face is not stretched over sharp edges — a punctured or flexed paper face is no longer a sterile barrier, even when the indicator inside has passed. Our assorted-size Class 4 dual-indicator 200-pack is stocked on exactly that two-size logic, so a clinic can cover hand instruments and trays from one case.
How do I choose between 24-hour, 3-hour, 1-hour and 20-minute biological indicators?
The readout time decides when a load can be released, and it is the only thing that changes between the four formats — the spore strain is the same.
| Readout | Pack size | Price (CAD) | What it changes in practice |
|---|---|---|---|
| 24 hours | 25 / 50 / 100 | $69.99 / $109.99 / $189.00 | Baseline format; reads at 8, 12 and 24 hours. Runs in the $379 dry-block incubator. |
| 3 hours | 50 | $249.99 | Same-day release without a 24-hour hold. |
| 1 hour | 50 | $269.99 | Day-surgery and high-turnover trays. |
| 20 minutes | 50 | $289.99 | Fastest release; for clinics that cannot hold a load overnight. |
The faster formats need the $1,499 reader, and no proprietary or locked equipment is required to run it. Choose the slowest format your release schedule can tolerate: faster readout costs more per indicator, and buying speed you do not use is the most common overspend we see on sterilization requisitions.
Clinic Supply & Cost Planner — Wound Care, Gloves, Disinfection & First Aid
Five planners for the consumables a clinic, lab or care home reorders most, based on the figures you enter. No sign-up, no email required — the estimate runs in your browser.
Wound care & dressing changes
Work out how much tape, dressing and cleansing stock your dressing rounds need each month.
Prices shown are our website retail prices in CAD and exclude tax and shipping. Estimates use planning assumptions, not clinical advice — adjust every figure to match your site.
Monthly wound-care stock check
Print this and tick it off with your team each month. It works alongside the estimate above.
| Monthly check | ≤ 20 patients | 21–50 | 51–100 | 100+ | Done | By | Date |
|---|---|---|---|---|---|---|---|
| Count current tape and dressing stock (all sizes) | |||||||
| Record dressing changes per patient per day | |||||||
| Confirm who changes dressings and who signs off | |||||||
| Check storage is dry and stock is in date | |||||||
| Note cleansing items to reorder together | |||||||
| Re-check the estimate above against actual consumption | |||||||
| Notes | |||||||
Ordering for a clinic, lab or care home? See wholesale & facility accounts.
Gloves, masks & PPE
Estimate glove and mask volumes from your daily procedure count.
Prices shown are our website retail prices in CAD and exclude tax and shipping. Estimates use planning assumptions, not clinical advice — adjust every figure to match your site.
Gloves and PPE stock & expiry check
Sizes and expiry dates are where stock quietly runs out. Print this and check it each month.
| Monthly check | ≤ 5 staff | 6–15 | 16–30 | 30+ | Done | By | Date |
|---|---|---|---|---|---|---|---|
| Count glove boxes by size (S / M / L / XL) | |||||||
| Count mask boxes and note the level in use | |||||||
| Check gown, cap and eye-protection stock | |||||||
| Check expiry dates on glove boxes | |||||||
| Confirm who orders and who signs off | |||||||
| Re-check the estimate above against actual consumption | |||||||
| Notes | |||||||
Ordering for a clinic, lab or care home? See wholesale & facility accounts.
Surface disinfection & hand hygiene
Size your surface-wipe and hand-hygiene order from rooms, rounds and staff.
Prices shown are our website retail prices in CAD and exclude tax and shipping. Estimates use planning assumptions, not clinical advice — adjust every figure to match your site.
Surface disinfection schedule & sign-off
Print one sheet per month and keep it with your cleaning records.
| Monthly check | ≤ 5 rooms | 6–15 | 16–30 | 30+ | Done | By | Date |
|---|---|---|---|---|---|---|---|
| List rooms / areas and the daily disinfection rounds | |||||||
| Record wipes needed per round | |||||||
| Record hand-hygiene station refill level | |||||||
| Check dispenser and wipe stock levels | |||||||
| Confirm who performs and who signs off | |||||||
| Re-check the estimate above against actual consumption | |||||||
| Notes | |||||||
Ordering for a clinic, lab or care home? See wholesale & facility accounts.
First aid & wound closure
Estimate first aid restock from your sites, staffing and use.
Prices shown are our website retail prices in CAD and exclude tax and shipping. Estimates use planning assumptions, not clinical advice — adjust every figure to match your site.
First aid kit configuration check
The CSA Z1220 kit types are commonly used as a reference for workplace first aid kits. Print this and check contents against your posted inventory list each month.
| Monthly check | Done | By | Date |
|---|---|---|---|
| Count first aid kits per site and confirm the kit type in use | |||
| Check kit contents against the posted inventory list | |||
| Replace used or expired items and record the date | |||
| Confirm each kit location is signposted | |||
| Record who checks the kit and how often | |||
| Re-check the estimate above against actual consumption | |||
| Notes | |||
Ordering for a clinic, lab or care home? See wholesale & facility accounts.
Treatment room & aesthetics consumables
Plan treatment-room consumables from stations and daily treatment volume.
Prices shown are our website retail prices in CAD and exclude tax and shipping. Estimates use planning assumptions, not clinical advice — adjust every figure to match your site.
Treatment room consumables check
Print this and check it off with the treatment team each month.
| Monthly check | ≤ 5 treatments / day | 6–15 | 16–30 | 30+ | Done | By | Date |
|---|---|---|---|---|---|---|---|
| Count treatment-room consumable stock (rolls, swabs, table covers) | |||||||
| Record treatments per station per day | |||||||
| Confirm set-up per treatment and who prepares it | |||||||
| Check storage and stock rotation | |||||||
| Note items to reorder together | |||||||
| Re-check the estimate above against actual consumption | |||||||
| Notes | |||||||
Ordering for a clinic, lab or care home? See wholesale & facility accounts.
Ordering for a clinic, lab or care home?
CliniEco Medical supplies clinics, labs, long-term care homes and home-care programs across Canada. For volume pricing and account setup, see wholesale & facility accounts or email alina@clinieco.ca.