CliniEco Medical Bowie-Dick Test Pack — ISO 11140-5 Type 2 | Daily Pre-Vacuum Air Removal Check | 6-Pack Box & Case of 60 Tests
Ships to Canada only
Specifications
| Type | Bowie-Dick test pack |
|---|---|
| Class | Type 2 |
| Standard | ISO 11140-5 |
| Pack quantity | 6 per pack |
| Available formats | 6-pack / Case of 10 |
| Use | Daily vacuum and air-removal check |
| SKU | CLI-STER-BD-6-CASE10 |
Pricing
| Order | Unit price |
|---|---|
| 1 box | $242.00 CAD |
| Case and carton prices are in the size table below | |
| Request quote for clinic and volume orders | |
Read the full product guide 17 sections · specs, use, compliance
CliniEco Medical Bowie-Dick Test Pack — ISO 11140-5 Type 2, Daily Vacuum Check, 6-Pack
Bowie-Dick test pack at $39.99 per 6-pack — the daily air-removal check your pre-vacuum sterilizer needs, with a clear blue-to-dark irreversible pass indicator. This ISO 11140-5 Type 2 test sheet is designed for the 134°C × 3.5-minute Bowie-Dick cycle and simulates a 4 kg cotton pack, so you catch air leaks and inadequate vacuum before they compromise your instruments. Same compliance logic as 3M Comply Bowie-Dick and Crosstex AirView — at a fraction of the cost.
Bowie Dick Test Pack (written Bowie-Dick in the headings on this page) — one ISO 11140-5 Type 2 sheet per run, supplied as a 6-pack box or as a case of 10 boxes, 60 test packs to the case. It goes in on the first cycle of the day, before any load.
CliniEco Service Promise
- Free shipping over $99 in Ontario · $199 rest of Canada (Ontario) / $199 (rest of Canada) (Ontario)
- Orders dispatched within 24h (Toronto)
- Canadian-owned company
What does a Bowie-Dick test show that a load of instruments cannot?
It shows whether the chamber can get the air out. A pre-vacuum sterilizer removes air before steam enters; if the vacuum pump is weak, a door gasket is leaking or non-condensable gases are present, steam never reaches the centre of a dense pack even though the gauge and the printout look normal. The test pack — ISO 11140-5 Type 2, a Class 2 indicator for the Bowie and Dick-type air removal test — simulates a 4 kg cotton pack, so a uniform colour change through the sheet means steam penetrated evenly. Instruments can pass a cycle and still have been exposed to a compromised one; this test is what catches the difference before the load is released.
When in the day does the test run?
First thing, before any load: the machine is cold, the chamber is empty, and a failure costs one cycle instead of a day of packs. The cycle is the 134°C, 3.5-minute Bowie-Dick cycle on a pre-vacuum sterilizer. On a gravity-displacement sterilizer there is no air-removal stage to test, so the pack does not apply: the ISO 11140-5 Type 2 sheet is written for the pre-vacuum problem specifically.
What does a month of daily tests cost?
| Order | Tests | Price | Per test |
|---|---|---|---|
| 6-pack | 6 | $39.99 | $6.67 |
$39.99 ÷ 6 = $6.67 a test. Twenty-one working mornings is 21 tests, or three and a half boxes a month — about $115.50 a month, roughly $1,375 across a year — which is the whole cost of knowing the vacuum is working, and one of the smaller lines in a sterilization budget. A box of six covers six mornings, so a clinic that runs the test on Monday to Friday and then forgets to reorder has a gap by the second week. Keep a spare box on the shelf, not a reorder in the system.
What happens when the test fails?
The loads in front of it are held, not released, and the failure is treated as a machine fault until proven otherwise. The usual causes are a door gasket that has hardened, a drain or filter partly blocked, a vacuum pump that is losing performance, or steam that is wet or carries non-condensable gases. Repeat the test once the obvious cause is corrected; if it fails again, the sterilizer comes out of service and the repair is documented. Write the failure, the action and the re-test result down the same day — a failed test that was fixed but not recorded is indistinguishable from a test that never ran.
Does a Bowie-Dick pack replace the spore test?
No. The two tests answer different questions: this one asks whether air was removed so steam could reach the load, and a biological indicator asks whether the cycle was lethal. A clinic needs both, at their own frequencies. The related products are on this page's monitoring line — the Class 5 steam integrator for in-pack checking of every load and the 24-hour biological indicator for the scheduled spore test. Record the daily result on a sheet that holds the cycle number and the sterilizer ID: print the sterilization log pack or generate your own with the log generator, and ask a sterilization compliance specialist if an auditor has challenged the schedule you run.
Product Specifications
| Attribute | Specification |
|---|---|
| Product | Bowie-Dick Test Pack (air-removal / vacuum leak test) |
| Standard | ISO 11140-5 Type 2 — Bowie and Dick-type test |
| Cycle | 134°C × 3.5 minutes (simulates a 4 kg cotton pack) |
| Pack Size | 6 test sheets per box; 60 tests per case (10 × 6-pack) |
| Indicator | Blue → dark irreversible color change on uniform steam penetration |
| Composition | Lead-free indicator ink (meets current environmental requirements) |
| Intended Use | Daily morning check of pre-vacuum sterilizers in dental, veterinary and medical facilities |
| Distribution | CliniEco MDEL #35334 |
Features
- ✓ Daily vacuum integrity check — run the first cycle of the day; a uniform color change confirms adequate air removal
- ✓ Meets ISO 11140-5 Type 2 performance — same standard used by 3M and Crosstex BD packs
- ✓ Simulates real load conditions — 4 kg cotton-pack equivalent challenges the sterilizer the way a full load does
- ✓ Unmistakable result — blue sheet turns uniformly dark when steam penetration is even; patchy or absent color = air leak
- ✓ Lead-free — safe for routine disposal
- ✓ Easy to document — record date, cycle and result for your compliance log
Quality & Compliance
- ISO 11140-5 Type 2 (third-party tested)
- Distributed by CliniEco Medical
Clinic & Volume Pricing
- Volume pricing is available on request — contact alina@clinieco.ca.
- Free shipping over $99 in Ontario · $199 rest of Canada (Ontario) / $199 (rest of Canada)
- No minimum order — buy 1 box or a case (10 boxes — 60 tests)
Why Clinics Choose CliniEco
- Save 30–45% vs. 3M/Crosstex BD packs at comparable ISO 11140-5 Type 2 performance
- Factory-direct pricing — no distributor mark-ups
- One supplier for the full sterilization line — pouches, rolls, tape, integrators, biological indicators and BD test packs
Clinic & Volume Orders
Need the 10-pack case, private-label branding or standing monthly volume? Contact us for pallet pricing and priority restocking: Request a B2B Quote.
💡 Pair It With Your Sterilization Routine
Combine with CliniEco Sterilization Pouches, Autoclave Tape and Biological Indicators to cover every load — or explore the full Sterilization Monitoring collection.
Related tests in this BI line
- Clinic Starter Bundle — Gloves, Spore Testing & Sterilization Packaging
- CliniEco 24-Hour Biological Indicator Incubator — Precision Dry-Block, 24 Wells
- CliniEco Medical Biological Indicator — 1-Hour Rapid Readout, Fluorescence, 50-Pack
- CliniEco Medical Biological Indicator — 20-Minute Rapid Readout, Fluorescence, 50-Pack
- CliniEco Medical Biological Indicator — 24-Hour Self-Contained, 100-Pack
- CliniEco Medical Biological Indicator — 24-Hour Self-Contained, 25-Pack
- CliniEco Medical Biological Indicator — 24-Hour Self-Contained, 50-Pack
- CliniEco Medical Biological Indicator — 3-Hour Rapid Readout, Fluorescence, 50-Pack
- Free Biological Indicator 5-Pack (clinics)
- CliniEco Rapid Reader — 4-Well Fluorescence Biological Indicator Reader
Related articles
- ISO 15882 in Practice: Selecting, Storing and Reading Chemical Indicators
- How do I know if my autoclave is working properly?
- How Often Must US vs Canadian Clinics Run Sterilizer Testing? Which Bowie-Dick Test Pack to Order
- How Often Must US vs Canadian Clinics Run Sterilizer Testing? Which Biological Indicator Pack to Order
Technical Documents
Everything below is on file for this product. Download what you need; the two documents we send individually are requested by batch so that what you receive matches the box in front of you.
This test pack is produced for CliniEco Medical by our ISO 13485 certified manufacturer. The third-party laboratory report we hold covers the biological indicator range, not this test pack; lot documentation is available as a Certificate of Analysis.
Running this test every morning? The same daily check, the 24-hour biological indicator and the Class 5 integrator can arrive together as the same three tests as one monthly pack, on one invoice.
Common questions
What is a Bowie-Dick test?
A Bowie-Dick test checks for air removal and steam penetration in a prevacuum (vacuum-assisted) steam sterilizer. It detects air leaks and inadequate vacuum that could prevent sterilization of porous loads.
How often should I run a Bowie-Dick test?
Daily — it is the first cycle of each day in a pre-vacuum (Class B) sterilizer. It verifies air removal and vacuum integrity before instrument loads.
Which sterilizers need a Bowie-Dick test?
Pre-vacuum (Class B / vacuum-assisted) steam sterilizers. Gravity-displacement (Class N) sterilizers do not require BD testing because they do not use a vacuum phase.
What if the sheet does not change color evenly?
A patchy or incomplete color change indicates inadequate air removal — stop using the sterilizer, check seals/vacuum and run a service inspection before resuming.
Is the Bowie-Dick test the same as a spore test?
No. The BD test checks air removal and steam penetration (physical/chemical); a biological indicator (spore test) verifies that microorganisms were killed. Both are part of a complete monitoring program — BD daily, plus a biological indicator for each sterilizer on every day it is used in Ontario (RCDSO daily).
How many test packs are included?
Each box contains 6 Bowie-Dick test packs (Type 2 per ISO 11140-5), enough for one week of daily testing.
Is this test pack ISO 11140-5 compliant?
Manufactured and tested to ISO 11140-5 (Type 2). Manufacturer documentation available on request.
Can I get my clinic logo on the packaging?
Yes — private-label branding is available on bulk orders. Ask via the B2B quote form.
