Gloves

This collection carries six nitrile glove cases for clinics, care homes and facility teams. Five lines are sold by the case of 1,000 gloves, and one heavy-duty line is available as a single box of 100 or as a ten-box case. Four of the six are medical examination gloves. The sections below set out what the mil figure on a glove box actually measures, how the film thicknesses in this collection compare in millimetres, which line is licensed for patient contact, and how a case converts into weeks of use.

6 products
More about Gloves

Which gloves are in this collection?

Line, intended use, sizes and pack build
Line Intended use Sizes Per box Per case
Aurelia Protégé, 4.0 mil Examination S, M, L, XL 100 1,000 (10 boxes)
Aurelia Robust, 4.5 mil Examination S, M, L, XL 100 1,000 (10 boxes)
Aurelia Transform 100, 3.2 mil Examination S, M, L, XL 100 1,000 (10 boxes)
CliniEco 3.5 mil standard Examination S, M, L, XL 100 1,000 (10 boxes)
CliniEco 6 mil heavy duty Examination, heavy duty Single adult size 100 1,000 (10 boxes)
INTCO Advancare, 3.5 mil Examination S, M, L, XL 100 1,000 (10 boxes)
INTCO Touch Flex, 3.5 g nominal Non-medical S, M, L, XL 100 1,000 (10 boxes)

What does the mil figure on a glove box measure?

A mil is one thousandth of an inch, or 0.0254 mm, and on a nitrile glove it describes the nominal wall thickness of the film. It is not a strength rating on its own and it is not a barrier grade. The conversion is worth doing once, because suppliers mix mil and millimetre figures across listings and the numbers look further apart than they are.

Nitrile film thickness in this collection, converted
Nominal thickness In millimetres Lines at that thickness
3.2 mil 0.081 mm Aurelia Transform 100
3.5 mil 0.089 mm CliniEco standard blue; INTCO Advancare
4.0 mil 0.102 mm Aurelia Protégé
4.5 mil 0.114 mm Aurelia Robust
6.0 mil 0.152 mm CliniEco heavy duty black

One listing in this collection needs a second look. The INTCO Touch Flex line is stated at 3.5 g nominal, which is the weight of one glove rather than a wall thickness, while the Advancare line beside it is stated at 3.5 mil, which is 0.089 mm of film. The two figures are not interchangeable, and comparing a gram weight against a mil thickness is the most common error when the two lines are lined up side by side.

Does a thicker glove give better protection?

Not in the way buyers usually assume. ASTM D6319-19(2023), the current edition of the standard for nitrile examination gloves for medical application, sets requirements for dimensions, tensile strength, elongation, watertightness and freedom from holes. It does not rank gloves by wall thickness. Every glove in a compliant case is tested for holes and for watertightness, so a 3.2 mil glove that passes is not less of a barrier than a 6 mil glove that passes. What the extra film buys is durability: resistance to a snag from a bur or a matrix band, longer wear between changes in a wet or abrasive task, and less chance of a tear during a heavy cleaning round. What it costs is touch, because palpation through 6 mil is duller than through 3.2 mil, and a clinician who works by touch notices within a morning.

Which line is licensed for patient contact?

Two INTCO lines are stocked in this collection and they are not interchangeable. Advancare is listed against the supplier's medical device licence 110308 and is intended for patient examination, phlebotomy preparation, wound care and specimen handling. Touch Flex is listed for cleaning, janitorial, salon, tattoo and food handling, with no licence behind it. The distinction is not thickness or feel, because both are 100% nitrile, powder-free and latex-free. It is the intended use the manufacturer declares, and a glove that touches a patient belongs on the licensed examination line. The same logic holds when an examination glove is compared with a heavier glove bought for cleaning rounds: a heavier film does not turn a non-medical glove into a medical one.

Which size should a team order when a case holds one size?

Each case holds a single size, so a mixed team buys one case per size rather than one mixed carton. Count hands rather than staff titles: most rooms cover the two middle sizes and keep one case each of the smallest and the largest for the few people at the ends of the range. The 6 mil heavy-duty line is the exception here. It is sold as a single adult size with an extended cuff, in a box or a case, so a team that wants S to XL in that weight has no size split to make. The INTCO case needs the same check in another form, because each size and each colour is its own case code rather than a size mix inside one case.

Are these gloves latex-free, and what does powder-free mean?

All six lines are nitrile, powder-free and latex-free, so there is no natural rubber latex protein in the film and no powder residue to leave on a surface or in a sample. None of the gloves in this collection is sterile, and none is intended for an aseptic procedure. Where that condition is required, the glove has to come from a sterile-packed line rather than from an examination case.

How many gloves does a case actually cover?

A case is ten dispenser boxes of 100, so 1,000 gloves. An operatory that gets through two boxes a week uses 200 gloves a week, which puts a case at five weeks of wear; three boxes a week brings that down to about three and a half weeks. Because the case holds one size, the figure to check before ordering is gloves per week per room multiplied by the number of rooms wearing that size, which is the calculation the clinic supply and cost planner works through from chair count.

Related reading

How are these gloves supplied in Canada?

CliniEco Medical distributes the range in Canada under MDEL #35334 and dispatches from its Toronto warehouse. Multi-site quantities, standing orders and tender paperwork are answered through the institutional account enquiry page.