Which Gracey Curettes and Ultrasonic Scaling Tips Should an Ontario Dental Clinic Buy? Selection Checklist

Three self-contained 24-hour biological indicators with bilingual English and French bottle labels

Which Gracey Curettes and Ultrasonic Scaling Tips Should an Ontario Dental Clinic Buy? Selection Checklist

A hygiene cassette came back from the sterilizer holding four Gracey 11/12 curettes and nothing else. The posterior distals had been scaled for a week with a mesial blade.

Which Gracey curettes and ultrasonic scaling tips should an Ontario dental clinic buy?

These are two purchases that decide each other. A curette sets what the hand does; an insert decides how much work the handpiece takes over. Buying one without the other produces a chair that either works too hard or replaces tips too often.

What do the numbers on a Gracey curette mean?

Pair Surfaces it reaches
1/2 and 3/4 Anterior teeth, all surfaces
5/6 Anterior teeth and canines
7/8 and 9/10 Posterior facial and lingual, larger blade on the 9/10
11/12 Posterior mesial
13/14 Posterior distal

The number comes in pairs because most curettes are double-ended, each end one half of the pair. A Gracey carries a single cutting edge with the blade set at roughly 70 degrees to the terminal shank, and it is shaped for one group of surfaces rather than for the whole mouth.

Product information graphic of the CliniEco CS6.2 6 L ultrasonic cleaner, showing the tank, lid and control panel

Neither instrument is a CliniEco line. What a hygiene room does order from us is the loop behind them: the CliniEco dental ultrasonic cleaner — 6 L benchtop, dual frequency 32/48 kHz for the cleaning step, and CliniEco ultrasonic multi-enzyme cleaning solution — low-foam concentrate, 1:400 for the bath.

Which should a hygiene chair hold, a Gracey or a universal curette?

A universal curette has two cutting edges set at about 90 degrees to the shank and works on any surface, so it is the instrument a clinician reaches for when the surface is unknown. A Gracey set is what pocket work needs, because each blade is angled for one surface and adaptation takes fewer strokes.

Should the order be rigid or after-five?

An after-five Gracey extends the terminal shank by roughly 3 mm, which reaches further into a pocket without the handle resting on the tooth. The longer shank is more flexible, so it belongs in pocket work, while a rigid shank suits heavy calculus and posterior line angles. Most rooms run standard shanks and add two after-five pairs.

Self-sealing Class 4 sterilization pouch with steam and EO process indicators, used for curettes and scaling inserts

Which ultrasonic insert matches the unit and the job?

Insert type Where it fits Work it takes
Universal All surfaces, supragingival Light to moderate deposits
Periodontal, slim Sulcus and pockets, subgingival Light deposits, thinner tip

The insert family is decided by the handpiece, not by preference. A magnetostrictive unit takes insert stacks matched to its frequency and a piezo unit takes tips rated for it; a tip from one family does not seat in the other. A slim tip wears faster than a universal one.

Which standard numbers on a scaler quote are out of date?

Curettes and scalers sit in one numbered family: ISO 13397-2:2005 covers Gr-type periodontal curettes, which is the Gracey shape, and ISO 13397-3:1996 covers H-type scalers. The powered instrument standard is ISO 18397, revised in 2025; the 2016 edition was withdrawn on 2 July 2025.

Three self-contained 24-hour biological indicators with bilingual English and French bottle labels

The same check applies further along the chain: ISO 17665-1:2006, still quoted in older literature, was withdrawn on 1 March 2024 and replaced by ISO 17665:2024. A supplier quoting a number without its year may be quoting a withdrawn edition.

How does an Ontario practice reprocess and record these?

The Royal College of Dental Surgeons of Ontario sets the province's infection prevention expectations, and Public Health Ontario publishes the reprocessing method: clean before anything else, inspect, package with a chemical indicator, sterilize, record the load. An ultrasonic bath is a cleaning step, and its dilution and temperature come from the manufacturer's instructions under ISO 17664-1.

Monitoring runs daily for each sterilizer on each day of use in Ontario, while American guidance sets a weekly baseline, a frequent source of confusion for staff who have worked on both sides. What the drawer consumes is packaging and indicators: CliniEco sterilization pouches — Class 4 self-sealing, dual indicator, 200 per box for loose curettes and inserts, and the CliniEco 24-hour biological indicators — 25-pack for a month of daily checks.

How many curettes and tips should one hygiene chair carry?

Count what the hygienist uses in a day, then add one full set, because a set in the sterilizer cannot be in a hand. That lands near a universal, four Gracey pairs, two after-five pairs and three or four inserts per handpiece.

Running a dental practice? See our dental practice supplies and reprocessing lines.

Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

References

  1. ISO 13397-2:2005 — Periodontal curettes, dental scalers and excavators, Part 2: Periodontal curettes of Gr-type (checked 31 October 2026)
  2. ISO 13397-3:1996 — Part 3: Dental scalers, H-type (checked 31 October 2026)
  3. ISO 18397:2025 — Dentistry: powered scalers (checked 31 October 2026)
  4. ISO 17664-1:2021 — Processing of medical devices, Part 1 (checked 31 October 2026)
  5. ISO 17665:2024 — Moist heat sterilization (checked 31 October 2026)
  6. Infection Prevention and Control — Royal College of Dental Surgeons of Ontario (checked 31 October 2026)

Printable companion: the free log and template centre carries a reprocessing and cycle record sheet, which is the paper an Ontario inspection asks for.

Work out how many tips and curettes a chair burns through with the clinic supply planner, which converts hygiene days into an order quantity.

Not sure how this applies to your own setup? Ask a sterilization compliance specialist — you’ll get a written answer specific to your equipment and province, with the regulation or standard cited.

Related Reading

Frequently Asked Questions

What is the difference between a Gracey 11/12 and a 13/14?

Both are posterior curettes, but the 11/12 pair reaches the mesial surfaces and the 13/14 pair reaches the distal surfaces. Cassettes often come back holding four of one and none of the other, which is why the distal line angles take longer.

Is a Gracey curette the same as a universal curette?

No. A Gracey has one cutting edge set at about 70 degrees to the terminal shank and is shaped for a specific group of surfaces. A universal has two cutting edges at about 90 degrees and works on any surface, which makes it the fallback rather than the working instrument.

Can ultrasonic scaling tips be sharpened?

Most cannot. An insert is a tuned assembly, and grinding the tip changes its geometry and working length, so wear is managed by replacement. Hand curettes are the opposite: a dull curette is a common cause of a stroke that removes nothing.

Does Ontario require daily biological monitoring?

Yes. In Ontario monitoring is daily for each sterilizer on each day of use; the weekly cadence in American guidance, CDC and AAMI ST79 included, is not the Ontario requirement.

Last updated: October 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Already working with clinics? Become a regional representative.