What Do the GSM and SAP Figures on an Underpad Label Actually Mean?
Two pads sit on a supply room shelf in a long-term care home outside Hamilton. Both are 60 by 90 centimetres. Both cartons say five layers. One costs eleven dollars more per case, and the director of care has been asked, for the third time this year, to explain why.
The label on the carton does not answer the question. It says 60 GSM, and it does not say whether that figure describes the core, the surface sheet, or the whole laminate. This is the point at which most purchasing conversations collapse into brand loyalty, and it is a point that a specification can fix.
What does GSM actually measure?
GSM stands for grams per square metre. It is a measure of mass per unit area, and the test that produces it for nonwovens is described in ISO 9073-1:2023. The number is useful because it is objective and quick to verify, and it is dangerous because it does not say what it is describing.
Three pads cover most of what an Ontario care home orders, and they differ in exactly the figures this article pulls apart. The CliniEco adult underpad, 60 by 90 centimetres, five-layer with SAP is the standard care-bed format; the heavy-absorbency 30 by 36 inch disposable underpad covers wider beds; and the PLA biodegradable underpad, 30 by 36 inch puts a compostable film on the same construction.
Three pads cover most of what an Ontario care home orders, and they differ in exactly the figures this article pulls apart. The CliniEco adult underpad, 60 by 90 centimetres, five-layer with SAP is the standard care-bed format; the heavy-absorbency 30 by 36 inch disposable underpad covers wider beds; and the PLA biodegradable underpad, 30 by 36 inch puts a compostable film on the same construction.
On an underpad there are at least three weights a supplier could quote. The mass of the whole laminate, surface sheet through backsheet. The mass of the absorbent core, which is where most of the value sits. And the mass of an individual nonwoven layer, which is a materials specification rather than a product specification.
A pad described as 60 GSM core and a pad described as 60 GSM total are different objects. In the first, the core alone carries 60 grams per square metre. In the second, the surface sheet, the core, the distribution layer and the backsheet together add up to 60, which leaves the core with a smaller share.
The right question at the shelf is not "what is the GSM" but "which layer is that GSM describing".
What is SAP and why does its loading matter more than the weight?
SAP is superabsorbent polymer. It is the material in the core that absorbs fluid and holds it under pressure, and it is the reason a modern pad can be thinner than the fluff-pulp pads it replaced.

Loading describes how much polymer sits per square metre of core, and it is the figure that separates two pads with similar total weight. A core built with more polymer and less fluff pulp holds fluid against the weight of a body better. A core built mostly from pulp wicks quickly and releases fluid when pressure is applied, which is the mechanism behind wet-back.
That mechanism is why a heavier pad is not automatically a drier pad. Weight tells you how much material is present. Polymer loading tells you what the material does when someone lies on it.
| Figure on the label | Unit | What it measures | Method | What it means for a buyer |
|---|---|---|---|---|
| Mass per unit area | g/m² | Weight of the layer or laminate named | ISO 9073-1:2023 | Confirms the weight claim, not absorbency |
| Thickness | mm | Caliper under a defined load | ISO 9073-2:1995 | Handling feel and storage volume |
| Absorption of liquids | g or mL per area | How much fluid the core takes up | ISO 9073-6:2000 | The closest thing to a capacity figure |
| Strike-through time | seconds | How fast fluid passes the surface sheet | ISO 9073-8:1995 | Dryness at the skin surface |
| Water penetration, spray | rating | Resistance of the backsheet side | ISO 9073-17:2008 | Leak risk against the sheet |
| Tear resistance | N | Strength of the film and laminate | ISO 9073-4:2021 | Whether the pad survives handling |
| Tensile strength | N | Strength along and across the pad | ISO 9073-3:1989 | Whether it rips when repositioned |
Why are millilitre ratings on underpads not comparable between brands?
Because there is no single test behind them. A capacity figure can be measured by soaking the pad freely in saline and weighing it, by loading it and then measuring what it holds, or by using a urine substitute with a defined surface tension. Those three methods produce three different numbers for the same product, and the largest number is the one that reaches the marketing sheet.
That is not a claim about dishonesty. It is a claim about measurement. A free-swell figure and an under-load figure describe different physical situations, and a care home buys the second one whether or not it is the one printed on the carton.
The practical rule: a capacity claim without a named method is a claim, not a specification. If a supplier cannot say which method produced the number, the number cannot be compared with anything, including the supplier's own previous shipment.
Where does wet-back fit into the test suite?
Wet-back is the sensation a resident experiences when pressure pushes fluid back through the surface sheet. It is the outcome that matters most for skin health, and it is the one with the weakest standardisation. Rewet testing exists as an industry method and appears in supplier data, but it is not covered by the ISO 9073 series in a way that makes one brand's result directly comparable to another's.
What a buyer can do is substitute the measures that are standardised. Strike-through time under ISO 9073-8:1995 describes how quickly fluid clears the surface sheet. Absorption under ISO 9073-6:2000 describes how much the core takes. A pad that is fast on strike-through and generous on absorption is doing the two things that prevent fluid from sitting at the skin.

The clinical reason this matters is set out in routine practices guidance from Public Health Ontario, which is where the skin-integrity and moisture considerations for care settings are described. A pad is a tool for keeping the skin dry, not a container for fluid, and the specification should be written from that starting point.
How does an underpad sit in the regulatory picture?
An underpad sold for incontinence use is a medical device in Canada. That brings the Medical Devices Regulations into play: section 21 sets what the label must carry, including the device name, manufacturer name and address, identifier, contents, intended use and storage conditions, and section 44 requires an establishment licence for importing or selling a device, with exemptions that include the retailer and the care facility.
In the United States the same family of product is described in 21 CFR 876.5920, which covers absorbent pads and similar devices and sets its own classification and exemptions. A Canadian buyer who reads a US listing and assumes the same obligations apply here is reading a different regulation, and the difference shows up in what the label must say and who must hold the licence.
Symbols on the carton, including the single-use mark, follow ISO 15223-1:2021. Manufacturing consistency, if you want to know whether the next case will match this one, is the ISO 13485:2016 question, and the risk file behind the product is the ISO 14971:2019 question. Skin-contact materials are the ISO 10993-5:2009 cytotoxicity question.
How do you write a tender line that actually settles the argument?
Four lines, then one more.
Dimensions in centimetres, written the way the case is labelled, with the inch equivalent in brackets so nobody converts on the phone. Mass per unit area with the layer named. Polymer loading, or if the supplier will not disclose it, the absorbency method used and the result under that method. Backsheet type, because a breathable film and a polyethylene film behave differently against a sheet. Then the packaging format, because 500-count cases and 50-count packs are different storage problems.
Add the change frequency the product is expected to support. That number is what turns the specification into a cost, and it is the number that a heavier pad has to beat.
For care homes running several sites, the arithmetic is worth doing once a year: cost per resident-day, plus linen replacement, plus staff time per change. The long-term care and retirement home supplies page lists the case formats that most Ontario homes order, and the wholesale collection holds the consolidated options if you are standardising across buildings.
Two products cover most of the demand. CliniEco adult underpads, 60 by 90 centimetres, five-layer with SAP, vacuum compressed, 500 per case is the format that fits a standard care bed, and the heavy-absorbency 30 by 36 inch disposable underpad covers the wider beds and the repositioning-heavy rooms. Where a site wants a compostable film on the PLA biodegradable underpad, 30 by 36 inch, 50 per case, the absorbent construction is the same question: ask for the core weight and the polymer loading, not the film.
Ordering for a care home or clinic network? Send the dimensions, the change frequency per resident and the monthly case volume to our clinic and institutional supply desk, and we will return a cost per resident-day with the case counts behind it. Reselling? become a distributor.
References
- ISO 9073-1:2023, Nonwovens, determination of mass per unit area (checked 11 November 2026)
- ISO 9073-2:1995, Nonwovens, determination of thickness (checked 11 November 2026)
- ISO 9073-3:1989, Nonwovens, determination of tensile strength and elongation (checked 11 November 2026)
- ISO 9073-4:2021, Nonwovens, determination of tear resistance (checked 11 November 2026)
- ISO 9073-6:2000, Nonwovens, absorption of liquids (checked 11 November 2026)
- ISO 9073-8:1995, Nonwovens, determination of liquid strike-through time (checked 11 November 2026)
- ISO 9073-17:2008, Nonwovens, determination of water penetration, spray test (checked 11 November 2026)
- ISO 13485:2016, Medical devices, quality management systems (checked 11 November 2026)
- ISO 14971:2019, Application of risk management to medical devices (checked 11 November 2026)
- ISO 10993-5:2009, Biological evaluation, in vitro cytotoxicity tests (checked 11 November 2026)
- Medical Devices Regulations (SOR/98-282), section 21, label content (checked 11 November 2026)
- Medical Devices Regulations (SOR/98-282), section 44, establishment licence (checked 11 November 2026)
- 21 CFR 876.5920, Absorbent pads and adult incontinence devices (US classification) (checked 11 November 2026)
- Public Health Ontario, Routine Practices and Additional Precautions (checked 11 November 2026)
- Public Health Ontario, Infection Prevention and Control topic index (checked 11 November 2026)
Planning tool: the incontinence supply planner converts pads per resident per day into monthly case quantities, so a weight change in the product does not turn into a stock-out.
Cost side: the clinic supply and cost planner lays out cost per resident-day beside change frequency, which is the only comparison that settles a heavier-versus-lighter pad argument.
Related Reading
- Underpad Construction: Absorbent Core and Wet-Back Prevention
- Underpad Sizing in Canada and the US: Which Dimensions Apply
- Absorbent Incontinence Products in Long-Term Care: Capacity, Size and Purchasing Unit
Frequently Asked Questions
What does GSM mean on an underpad?
GSM is grams per square metre, a measure of mass per unit area. On an underpad it can describe the whole laminate, the absorbent core alone, or a single nonwoven layer, and each of those numbers means something different. A pad sold as 60 GSM core and a pad sold as 60 GSM total are not the same product, which is why the term alone does not settle a comparison.
Is a higher GSM underpad always better?
Not by itself. More mass per square metre usually means more absorbent material, but absorbency depends on what the mass is made of, on polymer loading, and on how the fluid is distributed through the layers. A heavier pad with a poor core-to-backsheet bond can wet back faster than a lighter pad whose core is designed for the load.
What is SAP and why does its loading matter?
SAP is superabsorbent polymer, the material that locks fluid into the core and holds it under pressure. Loading is how much polymer sits per square metre of core. Two pads with identical total weight can behave differently if one carries more polymer and less fluff pulp, because polymer holds fluid under the weight of a body and pulp mostly wicks it.
Why are millilitre ratings on underpads not comparable between brands?
Because the test behind the number is not standardised across brands. Free swell capacity measured in saline, capacity measured under load, and capacity measured with a urine substitute give three different figures for the same pad. Unless the label names the method, the millilitre rating is a brand's own claim rather than a measurement you can put beside a competitor's.
Which test should a buyer ask for on an absorbent pad?
Absorption of liquids under ISO 9073-6 and liquid strike-through time under ISO 9073-8 are the two most useful, because together they describe how much the core takes and how fast fluid moves through the surface layer. Mass per unit area under ISO 9073-1 confirms the weight claim, and ISO 9073-4 covers tear resistance for handling.
Does an underpad need a medical device licence in Canada?
An underpad sold for incontinence use is a device in Canada and travels under the Medical Devices Regulations, which means the label content in section 21 and the establishment licence duty in section 44 apply to the seller and the importer. In the US the same kind of product is described in 21 CFR 876.5920, with its own classification and exemptions, so a claim copied from a US listing does not describe the Canadian duty.
How do I compare cost between two underpads of different weight?
Convert to cost per resident-day, not cost per pad. Take the case price, divide by the pads in the case, divide again by the number of changes a resident actually needs in a day, and add the linen replacement cost that a leaking pad creates. A heavier pad that removes one change per day usually wins on that arithmetic.
What should a tender specification include for underpads?
Four lines: dimensions, mass per unit area with the layer it describes, polymer loading or the absorbency method used, and the backsheet type. Add the packaging format, because a 500-count case and a 50-count pack are different handling problems in a care home with limited storage.
Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).