A monthly autoclave checklist should cover the chamber, door gasket, filters, water supply, sealer and the records that prove each task was done. Preventive maintenance is tracked separately from daily monitoring, and both streams have to survive an audit. The checklist earns its keep when it names the task, the frequency, the person responsible and the evidence kept on file.
Printable maintenance log — daily, weekly and monthly
Print one sheet per sterilizer at the start of each month and keep it beside the unit. Anything you cannot show on paper is, for audit purposes, work that was not done. Fill in the date, initial the box, and file the sheet with the load records at month end.
Daily (each day the sterilizer is used)
| Check | What to record | Pass | Initial |
|---|---|---|---|
| Chamber drain / strainer | Drained and strainer cleared | No debris, free flow | |
| Door gasket | Visual condition, no cracks or residue | Seals cleanly | |
| Chamber interior | Wiped, no staining or scale | Clean | |
| Cycle log | Cycle number, temperature, pressure, time | Matches set parameters | |
| Biological indicator | One per cycle type, per use day | Result recorded |
Weekly
| Check | What to record | Pass | Initial |
|---|---|---|---|
| Water quality | Feed water changed, reservoir flushed | No visible residue | |
| Air filter / vent | Cleaned or replaced per manual | Unobstructed | |
| Door hinge and lock | Operation, no play | Closes and locks fully | |
| Indicator and tape stock | Stock on hand for the week ahead | Sufficient |
Monthly
| Check | What to record | Pass | Initial |
|---|---|---|---|
| Descale / chamber cleaning | Product used, soak time | Complete | |
| Pressure and temperature accuracy | Reading against reference, deviation | Within tolerance | |
| Safety valve and interlocks | Function test result | Operates | |
| Serviceable parts | Gaskets, filters replaced if due | Replaced or still serviceable | |
| Water supply and drainage | Leaks, blockage, hose condition | None found |
What to keep on the shelf: spare door gaskets, chamber cleaner and descaler, indicator tape and Class 5 integrators, and a stock of biological indicators so a missed delivery never becomes a missed test. 24-hour self-contained biological indicators, 50-pack — $109.99 covers roughly two months of single-sterilizer testing at five use days a week.
How long to keep the sheets: follow your regulator or facility policy; where a specific retention period applies, record it in your policy manual so staff do not guess. Keep maintenance sheets with the load release records, not in a separate binder.
What should a monthly autoclave checklist cover?
A monthly checklist covers the parts that wear slowly and fail quietly. Inspect the door gasket for cracks, hardening and residue, and replace it on the manufacturer's schedule or sooner if it leaks. Check the chamber and door for scale or corrosion, and confirm the drain strainer is clear. Test the water supply against the sterilizer specification, since drift here shows up as staining and failed indicators. Verify the printer or cycle-record function, so a machine that passes today still produces evidence tomorrow. For sealing equipment, confirm the temperature and inspect a seal sample. Each of these tasks is quick, but together they catch the faults that daily monitoring only reveals after a load has already failed.
What does a pouch sealer calibration check involve?
A monthly sealer check confirms that the sealing bar holds its set temperature and that seals come out continuous and the right width. Run a seal on scrap material and inspect it for channels, wrinkles and incomplete welds, then compare it against the sealer's own temperature reading or an external check where available. If the seal shows gaps or the temperature drifts, the unit needs service before it produces another pack. Because a faulty sealer contaminates everything it seals, this check belongs on the same monthly sheet as the sterilizer tasks. Record the seal temperature and the outcome, not just a tick, so a reviewer can see what was verified.
How should the monthly checklist be structured?
A checklist works when each line states the task, the cadence, who owns it and where the proof lives.
| Task | Frequency | Owner | Evidence |
|---|---|---|---|
| Door gasket inspection | Monthly | Sterilization lead | Signed checklist line |
| Chamber and drain clean | Monthly | Clinical assistant | Signed checklist line |
| Water quality check | Monthly | Facility manager | Reading and date |
| Sealer seal sample | Monthly | Sterilization lead | Seal temperature and sample |
| Record review and filing | Monthly | Practice manager | Signed review note |
How do you keep maintenance records audit-ready?
Keep preventive maintenance in its own log, separate from the daily cycle and monitoring records, but store the two so they can be read together. Every line should show the date, the task, who did it and any corrective action, because a tick with no detail tells a reviewer nothing. Where a part is replaced, note the part and the date so the next interval can be calculated. File service reports and water-test results with the monthly sheets rather than in a separate folder. When an inspector asks how the sterilizer has been maintained, you should be able to hand over a single, dated series rather than reconstructing a story from scattered notes.
Tools that support the schedule
A few consumables make the monthly routine faster. A constant-heat pouch sealer holds its temperature for consistent seals, and a Bowie-Dick daily vacuum check pack keeps the air-removal column current between maintenance visits. Logging them against the same monthly sheet keeps the whole sterilization record in one place.
Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers.
A monthly checklist keeps the chamber in condition, and a spore test is what shows the maintenance actually held over the month. A 24-hour biological indicator 25-pack is available to Canadian clinics, long-term care homes and laboratories, and we cover the shipping.
A maintenance checklist is only as good as the log it feeds. A free sterilization self-check runs through the same records and checks an inspector is most likely to look for, by sector — roughly two minutes, printable, no sign-up.
Where to Buy Sterilization Monitoring Supplies in Canada
CliniEco Medical supplies these from Ontario with published CAD pricing (MDEL #35334) — no quote required, and each pack ships with the lot number printed on it so your monitoring record stays traceable.
| Format | Pack size | Price (CAD) | |
|---|---|---|---|
| 24-hour self-contained BI | 25-pack | $69.99 | Order |
| 24-hour self-contained BI | 100-pack | $189.00 | Order |
Round Out Your Sterilization Setup
A biological indicator is one link in the chain — these are the pieces it works with:
- Sterilization pouches — Class 4 dual-indicator, 200-pack — the packaging the indicator rides inside
- Autoclave indicator tape — 3-roll set — the external chemical indicator on every pack
- Class 5 chemical integrators — 100-pack — the in-pack check that pairs with your biological indicator
- Sterilization roll — 50 m pre-cut sheets for larger instruments
Which format does your sterilizer actually need?
Match the readout time to how fast you need the result: a 24-hour self-contained indicator works in any gravity or pre-vacuum cycle with a standard incubator, while a 3-hour fluorescence tube needs the matching reader. Running one cycle type per day, the 25-pack covers a month; busier clinics move to the 100-pack and cut the per-test cost.
How much do spore tests cost in Canada?
Published pricing runs $2.80 per test on the 25-pack down to $1.89 on the 100-pack — no distributor quote, no account needed.
Not sure which format your sterilizer needs? Generate a free sterilization log sheet first — it maps your cycles and tells you the pack size that fits. Questions about your setup? Ask a Compliance Specialist.
Related Reading
- Case review rebuilding ontario dental office autoclave maintenance log
- 30 day sterilizer log cycle counts failures retests
Not sure which consumable fits your set-up? Start with the order the 24-hour biological indicator 25-pack.
Take this further: print the free sterilization log and record templates, run the cycle log generator, or ask a compliance specialist to review your setup.
Frequently Asked Questions
How is preventive maintenance different from daily monitoring?
Daily monitoring records each cycle and its indicators. Preventive maintenance tracks scheduled service such as gaskets, filters and sealing checks on a longer interval.
Should the autoclave maintenance log be paper or digital?
Either works if it is dated, signed and retrievable. What matters is that each task shows who did it and when, with any corrective action noted.
What happens if a monthly maintenance task is missed?
Record the gap, complete the task as soon as possible and note the corrective action. Hidden gaps look worse to an auditor than a documented, resolved miss.
CliniEco Medical is a licensed medical device establishment (MDEL #35334).