An aesthetic procedure kit looks like a procurement convenience and behaves like a specification problem. The box promises one line item instead of five, but a kit cannot be evaluated until the contents are written down with counts and sizes, because two kits that both claim to cover "a filler appointment" can differ in drape size, cannula gauge, swab count and whether the components are documented as sterile per lot. The specification is the product; the box is the packaging.


This article sets out what a Canadian med spa should be able to read off a kit specification before ordering, how the units of sale are counted so that quotes can be compared, and which items stay as separate lines even in a room that has standardised on a kit. The listings used for the worked numbers are the ones on this site; the aesthetic procedure kit itself is published as a preview while the line is being introduced, with contents and counts confirmed at quotation, so it is treated here as a specification exercise rather than as an orderable case.
What has to be written down before a kit can be ordered?
Six things, and a supplier who cannot answer all six has not specified a kit. The itemised contents. The count of each item inside one kit. The size or gauge of each item, not just its name. The sterility status of each component and the method used. The unit of sale, including how many kits are in a case. And the identification data that follows each lot.
That list is unglamorous, and it is where most kit comparisons fail. A quotation that says "sterile drapes and towels, syringes and needles, cannulas, swabs, gloves and masks" describes a category of product, not a product. The counts decide the per-procedure cost; the sizes decide whether the kit works in the room; the sterility documentation decides whether the kit can be used on a patient at all.
| Specification line | Why it decides the purchase | What a weak answer looks like |
|---|---|---|
| Itemised contents | Sets the per-procedure cost and the stock-out risk | A category list with no counts |
| Count per kit | Converts a kit price into a per-procedure figure | "Assorted" or "as required" |
| Size or gauge per item | Determines whether the kit fits the procedure the room actually runs | Gauge ranges with no distribution |
| Sterility status and method | Decides whether the item may enter a sterile field | "Sterile" with no method or lot evidence |
| Unit of sale and case count | Makes quotes comparable between suppliers | A case price with no contents description |
| Lot identification | Makes recall possible if a component is later subject to a notice | No lot field on the outer case |
How are kit sizes expressed, and why does it matter?
Kit size is not one number. It is a set of dimensions, one per component, and each one has a failure mode. Drapes and towels are described by dimensions and by whether they are fenestrated, because a drape that is too small leaves a margin that has to be covered with something else. Syringes are described by volume and by dead space, since a low dead space barrel changes how much product is left in the hub at the end of an injection. Needles are described by gauge and length. Cannulas are described by gauge, length and tip geometry. Swabs are described by count and by whether each is individually wrapped.
The individually wrapped question is the one that changes workflow most. A pack of sterile swabs that are wrapped together is one sterile field opened once; a pack of individually wrapped swabs is a series of sterile fields, each opened at the moment of use. The second costs more per swab and safer in a room where a pack may sit open across two appointments.
Where a practice buys components separately, the same specification logic applies. A sterile 12-ply gauze sponge in a 200-count pack, for example, is specified by size, ply, sterility and count, and its 200-count pack is the unit that gets rotated — not a handful decanted into a dish at the start of a list.
How is a kit's case unit actually counted?
Three words get used interchangeably in supply catalogues and they mean three different quantities: pack, box and case. A pack is what is inside; a box is what the pack comes in; a case is what the boxes ship in. The multiplier between them is usually ten, occasionally five, and sometimes the case is the only unit sold.
The pouch line on this site shows the pattern cleanly, and it is worth memorising because the same arithmetic appears in every kit: a size is sold as 200 per box, and the same size is sold as a case of 10 boxes — 2,000 pouches. A clinic comparing a box price to a case price without reading the unit will conclude a saving that does not exist. The gauze line repeats it: a single box of 200, or a bulk case of 10 boxes, 2,000 sponges.
| Unit name | What it contains | The mistake it invites |
|---|---|---|
| Pack | The saleable inner unit, counted in pieces or in a wrapped set | Treating a pack as the case and over-ordering |
| Box | One inner carton, usually a fixed count such as 200 | Comparing a box price with a case price |
| Case | A shipping carton, typically 10 boxes but sometimes 5, sometimes 1 | Assuming the multiplier instead of reading it |
| Kit | One assembled procedure set, counted in procedures | Assuming a case of kits equals a case of components |
For a kit, the conversion that matters is kits to procedures, and then kits to cases. A room running twelve aesthetic procedures a week with a single-use kit consumes roughly fifty kits a month before waste and re-dos; if a case holds twenty kits, that is two and a half cases a month, and the reorder point is a function of the supplier's lead time rather than of the shelf.
Which items stay separate even when a kit is in use?
Four, in most rooms. The first is the component a practitioner varies by patient — a cannula in a different gauge, or a longer needle — because a fixed kit cannot follow a clinical decision made at the chair. The second is anything consumed at a rate that differs from the kit rhythm, such as gloves, which are used in far greater numbers than one pair per procedure. The third is skin preparation and aftercare, which are often product-specific and therefore brand-locked rather than kit-locked. The fourth is the sterile field items the room already stocks in bulk, where a kit would duplicate a line that is lower in cost and simpler to keep on the shelf.
That is why most med spas end up with a hybrid: a kit for the assembly-heavy middle of the tray, and separate lines for the variables. The blunt fill cannula line exists precisely because the gauge is a clinical choice rather than a kit constant, and a room that standardises on a kit still keeps a gauge or two outside it.
What documentation should follow each lot?
For each sterile component: the sterility method, the lot number, the expiry or use-by date where one is given, and the single-use status. For the assembled kit: the lot or assembly record that ties the components together, because a recall on one component has to reach every kit that contains it. A kit assembled without that link converts a component recall into a full recall of everything the room holds.
This is also where the specification meets the licence record. Each component's device classification and licence position are read from the public licence listing rather than inferred from the kit's marketing, and a kit does not automatically inherit a single class from its contents. A supplier who describes a kit as a class of device without naming the components and their records is describing a marketing position.
What does the label have to say?
Under the federal regulations, the information required by section 21(1) of the Medical Devices Regulations must be, as a minimum, in either English or French, with the other official language available at the purchaser's request; both languages are required as a minimum only where the device is sold to the general public. A kit sold to a clinic is professional-use supply, so a single-language label can meet the federal minimum.
Provincial rules sit above the federal floor. In Quebec, inscriptions on a product, its container or its wrapping must be drafted in French, with a translation permitted only where the French is not less prominent — which reaches both the supplier's printing and any label the clinic adds. A med spa ordering the same kit for rooms in Montreal and Mississauga should expect to treat the label as two questions rather than one.
How should a clinic trial a kit without committing a year of stock?
Three steps, in order. Get the specification in writing — the same six lines as above, not a marketing sheet. Run one case through a month of real procedures and count what is left over and what ran short, including the items that were substituted from elsewhere. Then calculate the per-procedure cost from the actual consumption rather than from the kit count, because the two diverge as soon as practitioners vary the tray.
If the kit survives that, the ordering decision is straightforward. If it does not, the trial has still produced something useful: a written specification of what the room actually uses, which is the document any future supplier has to answer.
Where does a clinic take this next?
Three things a clinic can act on rather than read: a printable compliance log sheet that records receiving dates, lot numbers and open-on dates and exports from the browser; the clinic supply planner that turns daily bench counts into cases per month; and, where a finding has to be documented for an inspector, Ask your compliance question which returns a written answer citing the regulation or standard it rests on.
Facility and multi-site buyers can Wholesale and multi-site ordering for case pricing and account setup. Reselling? become a distributor.
Related reading
- Storing and labelling an aesthetic procedure kit in Alberta clinics
- Which standards apply to an aesthetic procedure kit in Alberta clinics
- Post-procedure repair masks for aesthetic clinics: case counts and reorder points
Can I order the aesthetic procedure kit from this site today?
The kit is published as a preview while the line is being introduced: the contents are listed at category level and the counts and gauges are confirmed at quotation, so it is not presented here as an orderable case. The components that would go into it are stocked separately, and the specification questions in this article are the ones to put to any supplier before a first order.
How many procedures does one kit case cover?
Divide the kit count per case by the procedures per week, then multiply by four for a monthly figure. A room running twelve procedures a week consumes roughly fifty kits a month before waste, so a case of twenty kits is two and a half cases a month. The reorder point then follows the supplier's lead time rather than the shelf size.
What is the difference between a pack, a box and a case?
A pack is the saleable inner unit, a box is the carton it comes in, and a case is the shipping carton. The multiplier is usually ten but is sometimes five or one, and it has to be read rather than assumed — a pouch size sold at 200 per box is 2,000 in a case of ten boxes, and comparing the two prices directly produces a false saving.
Does a kit need its own medical device licence?
Read the licence record for the components rather than assuming a kit inherits one classification. Each component's position is recorded in the public licence listing, and a kit assembled from licensed components still needs its assembly and lot linkage documented so that a component recall can reach the kits that contain it.
Must kit labelling be in both English and French?
Not always. Under the federal regulations the section 21(1) information must be, as a minimum, in either English or French, with the other official language available on request; both are required as a minimum only for devices sold to the general public. A kit sold to clinics can therefore carry one language and still meet the federal minimum, while provincial rules may add a requirement.
Which items should a med spa keep outside the kit?
The items that vary by patient or by clinical decision: cannula gauge, needle length, and any product-specific preparation or aftercare. Gloves are usually stocked separately because consumption does not track procedure counts, and bulk sterile field items are often lower in cost as separate lines than duplicated inside a kit.
How do I compare two kits that both claim to cover the same procedure?
Put the six specification lines side by side: itemised contents, count per kit, size or gauge per item, sterility status and method, unit of sale and case count, and lot identification. The lower in cost kit is usually the one with fewer specified lines, not the one with the lower price.
Sources
- Medical Devices Regulations, SOR/98-282, sections 21 to 23 on label information and language — laws-lois.justice.gc.ca - Health Canada, Medical Devices Active Licence Listing — health-products.canada.ca - Health Canada, recalls and safety alerts for medical devices — recalls-rappels.canada.ca - Charter of the French language, CQLR c. C-11, sections 51 and 52 — legisquebec.gouv.qc.ca - ISO 11607-1:2019, Packaging for terminally sterilized medical devices — evs.ee - ISO 11607-2:2019, validation of forming, sealing and assembly processes — evs.ee - EN 868-5:2018, sealable pouches and reels of porous materials — evs.ee - ISO 11135:2014, ethylene oxide sterilization of health-care products — evs.ee - ISO 11137-1:2025, radiation sterilization, requirements for development, validation and routine control — evs.ee - ISO 11140-1:2014, chemical indicators, general requirements — evs.ee - ISO 17665:2024, moist heat sterilization processes — evs.ee - CAN/CSA Z314:23, Canadian medical device reprocessing in all health care settings — csagroup.orgCliniEco Medical distributes clinic and laboratory consumables in Canada under MDEL #35334. Requirements that bind a specific laboratory remain the ones in its own licence, its quality programme and its written procedure.
Last updated: 12 November 2026.
Supplies this room reorders: nitrile exam gloves, 3.2 mil, 1,000 per case, pre-perforated exam table roll, 18-inch and patient bibs, 17 × 24 in, 500 per case. All of them are in the current CliniEco catalogue and orderable online.