Which Ymarda Flip-Up Dental Loupes Do Dental Laboratories in Montreal Order? Sizes and Case Formats

CliniEco 2.5x flip-up loupes working distance guide, 350, 400, 450 and 500 mm settings

Which Ymarda Flip-Up Dental Loupes Do Dental Laboratories in Montreal Order? Sizes and Case Formats

A Montreal laboratory buying loupes is usually buying for a bench of two or three, and the first question is not magnification. It is whether the optics have to swing out of the way. Flip-up loupes answer that: the barrels lift out of the line of sight with one movement, and the technician is back to naked-eye vision without taking the frame off between jobs.

The pair in question is 2.5x prismatic optics at a 420 mm working distance with a 120 mm field, and the CliniEco 2.5x flip-up dental loupes, adjustable PD is that specification in a lightweight frame with the headlight mount built in.

Which Ymarda flip-up model do Montreal laboratories order?

The 2.5x, in almost every case. It is the magnification that suits finishing, trimming and the prosthetic detail that fills a laboratory day, and it keeps a field wide enough that a technician is not hunting for the edge of the work. The frame adjusts for interpupillary distance, so a pair can move between two technicians who sit at the same distance, and the working distance is set when the pair is built.

The single-specification build is what makes the order short: one magnification, one working distance per pair, and a case that keeps the pair with its user. Everything a laboratory needs to decide sits in those two numbers.

Is the 420 mm working distance a limitation?

CliniEco 2.5x flip-up dental loupes specification card, working distance 350 to 500 mm, four settings

It is a decision, not a limitation, and it has to be made before the order. Working distance is the eye-to-work gap, and at a bench it is shorter than at a dental chair because the technician sits closer to the model. A pair built at 420 mm is comfortable for a technician who works with the model at chest height; a technician who works further out will lean in and lose the posture the loupes were bought for.

Optical option Magnification Working distance Field Fits at a bench
Flip-up 2.5x 2.5x 420 mm, fixed 120 mm diameter finishing, trimming, prosthetic detail
Flip-up 3.5x 3.5x set at build, four options narrower fine margin and implant interface work
Angled 3.5x 3.5x set at build, 360 to 560 mm narrow, upright posture long sessions with the neck vertical

The field number is the one buyers skip. A 120 mm field at 2.5x means the whole occlusal surface stays in view without repositioning, which is exactly what a technician checking a margin wants; a 3.5x pair narrows that field and asks for more movement to see the same area.

What case format does a multi-technician bench order?

One pair per case, with the carry case and cleaning cloth included. A three-technician bench in Montreal orders three pairs at three working distances rather than one pair and a rotation, because the working distance travels with the optics and a shared pair only works for technicians who sit identically. The interpupillary adjustment covers the rest: each technician sets it in seconds, and the frame goes back to its owner at the end of the shift.

CliniEco 2.5x flip-up loupes working distance guide, 350, 400, 450 and 500 mm settings

Where a bench also needs light, the 2.5x flip-up loupes with the wireless headlight set ships as one unit with the light already matched to the frame. Buying the light separately works only if the frame has the mount, which this one does.

How does flip-up compare with angled optics for bench work?

Flip-up wins where the work alternates between magnified and naked-eye, which is most of a laboratory day: checking a margin under magnification and then trimming by eye happens dozens of times. Angled optics win where the work is magnified for long stretches and the neck needs to stay upright, which is why the Ergo 3.5x angled loupes are the other half of the same conversation at a bench.

Neither frame is eye protection. The CCOHS guidance refers to CSA Z94.3.1 for selection, use and maintenance of eye and face protectors, and certified protectors are marked on the lens, the frame or the side shield. A loupe frame is unmarked and open at the sides, so a technician grinding or polishing wears spectacles or a shield as well.

What permit applies to a Montreal dental laboratory?

Quebec regulates the business, not just the technician. Under the Code des professions, CQLR c. C-26, article 187.6, no one may operate a laboratory set up to make or repair dental prostheses unless those activities are directed by a person holding a permit to direct a dental prosthesis laboratory, and article 187.8 routes the application through the professional order of which the applicant is a member. It is a corporate-level requirement rather than a personal one, and it is the reason a Quebec laboratory order tends to arrive with a single decision-maker attached.

Ordering for a laboratory or a multi-site group? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

Working in a dental laboratory? The dental practice and laboratory supply page groups the magnification, lighting and bench consumables ordered on the same cycle.

References

  1. Code des professions, CQLR c. C-26, articles 187.6 and 187.8, permit to direct a dental prosthesis laboratory — Éditeur officiel du Québec (official consolidated text on Légis Québec) (checked 12 November 2026)
  2. Eye and face protectors, OSH Answers — Canadian Centre for Occupational Health and Safety (checked 12 November 2026)

Printable companion: the clinic supply and cost planner carries the per-technician optics line, so a bench that grows from two to three has the specification on file.

Want the serial numbers on one sheet rather than in an inbox? The free log and record set includes an equipment sheet that suits a bench of loupes and lights.

Related Reading

Frequently Asked Questions

Is 2.5x enough for laboratory work?

For finishing, model trimming and most prosthetic detail it is the working magnification. Fine margin and implant interface work usually moves to 3.5x.

Can the 420 mm working distance be changed?

Not on a built pair. Two technicians who sit at different distances need two pairs, which is why the order is per technician.

Do flip-up optics work with a headlight?

Yes. The frame carries the mount and the light clips on, so the optics can swing up while the light stays put.

What does a laboratory need to show about its permit?

In Quebec, the person who directs the laboratory's activities must hold a permit to direct a dental prosthesis laboratory, and the permit is obtained through the professional order.

Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.