Which Standards Apply to 95 kPa Specimen Bags 6×9–12×15 in British Columbia Clinics

A 120 mL screw-cap specimen container of the kind carried inside a 95 kPa transport bag

Which Standards Apply to 95 kPa Specimen Bags 6×9–12×15 in British Columbia Clinics

A clinic in Burnaby sends a blood tube, a urine container and two swabs for the same patient, and the set leaves the room in one bag. What that bag has to satisfy depends less on the clinic than on how the sample travels: a bag handed to a courier and a bag that boards a flight follow different rules. The unit counted here is a 95 kPa specimen bag sized 6×9 in, and the standards question splits into three layers — the transport regulation, the pressure test inside it, and the rule that protects the staff member who packs the bag.

Which standards apply to a 95 kPa specimen bag in British Columbia?

The transport layer is federal. A Category B biological substance travels as UN3373, and the packaging rules come from packing instruction P650 on the road and IATA 650 in the air. Inside it sits the number on the bag: 95 kPa is an internal pressure test held without leakage. Absorbent material goes in the primary receptacle pocket where the instruction calls for it, and the requisition rides in the separate document pouch so paperwork never presses against a sample.

Two corrections matter for a purchase. First, no design-type approval is issued for the bag itself — a supplier who offers a "certificate" is really offering a test report, and the packing duty still rests with the clinic that closes the bag. Second, ISO 11607-1:2019 is not the standard for this job: it governs packaging systems for terminally sterilized medical devices, a different family. A spec sheet that cites it as a transport standard has borrowed a name that does not cover specimen movement.

Two 95 kPa specimen transport bags in use, each with a specimen container in the front pocket and a requisition in the document pouch

The British Columbia layer is about people, not packages. Part 6 of the WorkSafeBC OHS Regulation deals with biological agents and requires a written exposure control plan where workers may be exposed to one, which includes staff who handle blood, body fluids and clinical specimens.

Which bag size covers blood, urine and swab samples from a BC clinic?

Size follows the specimen, and the differences are practical rather than technical.

A 120 mL screw-cap specimen container of the kind carried inside a 95 kPa transport bag

Bag size What it carries Pack units
6 x 9 in Blood tubes, a single urine container, swabs, a small tissue pot Box of 100; case of 1,000
7 x 11 in Several tubes plus a container, mid-size histology pots Box of 100; case of 1,000
8 x 10 in Two or three containers, a larger tissue pot Box of 100; case of 1,000
12 x 15 in A 24-hour urine jug, several pots, microbiology sets Box of 100; case of 1,000

Most rooms settle on 6×9 as the working size and keep a box of 12×15 for the exceptions, because an oversized bag makes the absorbent pad slide away from the container. Our own line is sold from one product page that carries all four sizes, so the size is a variant choice rather than a separate order.

Who is responsible for packing a Category B sample, and what does that mean for a clinic?

The shipper packs. The courier moves. A clinic that hands an untrained staff member a sample and a bag has taken on the packing duty unprepared, and that is the gap an inspector finds first. In practice the duty becomes three habits: one named person closes the bag, the closure is checked before the pouch is sealed, and any bag that has been dropped or crushed is repacked rather than taped over.

Running a diagnostic lab or a collection site? See our laboratory specimen and transport supplies for the rest of the bench list. For a low-volume collection room, a leak-resistant three-wall transport bag is the sensible pairing: the extra wall buys time if the primary container fails, and the design keeps the requisition clear of the absorbent. A clinic that also fills cups on site keeps a stock of graduated 90 mL sample cups beside the bags, because a cup that does not seal is the usual root cause of a wet bag.

Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

References

  1. ISO 11607-1:2019 — Packaging for terminally sterilized medical devices, Part 1: the family that does not govern specimen transport (checked 3 November 2026)
  2. WorkSafeBC Occupational Health and Safety Regulation, Part 6 — Biological Agents, the rule set that covers workers handling clinical specimens in BC (checked 3 November 2026)

Printable companion: the free clinic log templates include a specimen dispatch sheet that records the bag size, the courier and the time a sample left the building.

Want the case count instead of a guess? The clinic supply planner turns weekly sample volume into boxes and a reorder point.

Related Reading

Frequently Asked Questions

Which standards apply to a 95 kPa specimen bag in British Columbia?

Three layers: the federal dangerous goods transport regulations with UN3373 Category B and packing instruction P650, the 95 kPa pressure test inside that instruction, and WorkSafeBC's biological agents rules covering the people who pack the bag.

Does a specimen bag need a certificate to be sold in Canada?

No design-type approval is issued for a specimen bag. What a buyer can ask for is the manufacturer's test record showing the bag holds 95 kPa without leakage, and the importer's establishment licence number in writing.

Which bag size covers blood, urine and swabs from one clinic?

A 6 x 9 inch bag takes routine tubes, a urine container and swabs together; move to 7 x 11 or 8 x 10 for several tubes, and to 12 x 15 for a 24-hour urine jug.

Who is liable if a Category B sample leaks in transit?

The packing duty rests with the shipper, which is the clinic that closes the bag, not the courier. That is why the training record is the first document an inspector asks for.

Which records should a BC clinic keep when a sample leaves?

The exposure control plan, the packer's training record, the dispatch entry that names the courier and time, and a short log of any leak or rejected package.

Last updated: October 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.