Which Canadian supplier has the lowest cost per test for Bowie-Dick test packs in 6 per pack?
Ask five Canadian suppliers for the cost per test on a Bowie-Dick pack and the answers arrive in four units: a box of six, a case of sixty, a price per pack with the case in a footnote, and a monthly standing order. The number that compares is the test, so the exercise is a division — and most of the price difference people think they see lives in that division.
The pack that closes the daily air-removal requirement in one item is the
ISO 11140-5 Type 2 Bowie-Dick test pack, 6 to a box and 60 to a case, run at 134 °C for 3.5 minutes on the first cycle of the day.
What does a Bowie-Dick test pack actually test?
It tests the vacuum, not the steam. A pre-vacuum sterilizer pulls air out before steam enters, and if the pump is weak, a seal leaks or the load is packed badly, a pocket of air stays behind and steam cannot reach it. A uniform colour change shows air was removed evenly; a lighter patch in the middle means stop and look at the machine.
That is why the pack is a Class 2 indicator under ISO 11140-5 and not a general chemical indicator: neither Type 1 tape nor a Type 5 integrator can stand in for it.
How do you turn a 6-pack box into a cost per test?
Divide by six. The rest is making sure two suppliers are quoting the same thing.

| What the supplier quotes | Tests included | Cost per test |
|---|---|---|
| Box of six, 6-pack format | 6 | Box price divided by 6 |
| Case of ten boxes | 60 | Case price divided by 60 |
| Case quoted as ten packs | Confirm whether a pack is one test or one box of six | Ask before dividing |
The third row is where a real difference hides: a case described as ten packs can mean ten test sheets or ten boxes of six, a factor of six. A supplier that cannot state tests per case has not given a comparable number.
Which label claims should be checked before comparing price?
Four, all on the pack: the standard and class, ISO 11140-5 Type 2; the cycle it suits, since a 134 °C 3.5-minute sheet does not fit a 121 °C cycle; a lot number, so a failed test is traceable; and an expiry date, because the indicator chemistry has a shelf life a store-room order outlives.
Why does the 6-pack format cost more per test than a case?
Because the small unit carries the handling: a box of six is packed, labelled, stored and shipped as a discrete item, and that cost is recovered across six tests rather than sixty. Practices buy it for a second sterilizer, a new unit, or a spare box.

The honest comparison is annual: one sterilizer run every working day needs about 245 tests, or 41 boxes of six against a little over four cases. Both orders are right; they differ in cash on the shelf.
How often is the test run in Ontario?
Every day the sterilizer is used, for a dynamic air removal unit. Ontario guidance requires an air removal test with a Class II chemical indicator each day the sterilizer runs, plus a biological indicator each day it is used.
| Testing pattern | Tests a year | Boxes of six | Cases of ten boxes |
|---|---|---|---|
| Daily, one sterilizer, 245 days | 245 | 41 | about 4.1 |
| Two sterilizers, daily | 490 | 82 | about 8.2 |
| Weekly, a pattern below the Ontario floor | 52 | 9 | about 0.9 |
That weekly row is the pattern most often inherited from a US policy sheet: weekly monitoring is the CDC and AAMI baseline in many US facilities, and it is not the Ontario requirement — which decides the annual order size before any supplier is contacted. The record is one row per day: date, sterilizer, cycle, operator, pack lot and result.
Which items sit on the same order as the test packs?
The monitoring set is four lines: the Bowie-Dick pack covers air removal, a 24-hour self-contained biological indicator, 25 tests to a pack covers the spores, an indicator incubator reads the result, and indicator tape in a 3-roll set marks every pack.
Running a dental practice? See our dental practice sterilization and hygiene supplies. Practices that want the monitoring routine checked against their own machine and province can ask the sterilization compliance desk.
Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.
References
- Public Health Ontario, Infection Prevention and Control for Clinical Office Practice, 2nd revision, November 2026 (checked 16 November 2026)
- ISO 11140-5:2007, Sterilization of health care products, chemical indicators, class 2 indicators for Bowie and Dick-type air removal tests (checked 16 November 2026)
- CSA Z314:23, Canadian medical device reprocessing in all health care settings (checked 16 November 2026)
- Centers for Disease Control and Prevention, Recommendations for Disinfection and Sterilization in Healthcare Facilities (checked 16 November 2026)
Printable companion: the daily air-removal log records the result, the operator, the cycle number and the pack lot in one row per day the sterilizer is used.
Comparing packs, indicators and biologicals on one page? The sterilization monitoring usage calculator keeps tests per day, packs per case and boxes per year in separate fields.
Related Reading
- Bowie-Dick Test Packs: Where Canadian Clinics Buy and What to Check
- Sterilizer Testing Frequency: US vs Canada, and Bowie-Dick Test Pack Ordering
Frequently Asked Questions
How is cost per test worked out on a 6-pack of Bowie-Dick packs?
Take the price of the box and divide by six, because each box holds six single-use test sheets. Comparing a box price against the case price of a sixty-test case without that division is the error that makes one supplier look like the lower price.
Does a 6-pack box cost more per test than a full case?
Usually, and that gap is the convenience premium for a small unit. One sterilizer run every working day uses about 245 tests a year — 41 boxes of six, or a little over four cases — so the format is a cash-flow choice as much as a unit-price one.
What should the pack label say?
It should identify a Class 2 chemical indicator for Bowie and Dick-type air removal tests under ISO 11140-5, state the cycle it suits, and carry a lot number and expiry. A pack that only says Bowie-Dick without the class and standard is the one to question before comparing price.
How often is a Bowie-Dick test required in Ontario?
Every day the sterilizer is used, where the unit is a dynamic air removal type. Ontario guidance requires an air removal test with a Class II chemical indicator on each day the sterilizer runs, plus a biological indicator on each day it is used.
Can a Bowie-Dick pack replace the biological indicator?
No. The Bowie-Dick pack shows whether the chamber removed air; the biological indicator shows whether the cycle reached sterilization conditions at the hardest point. Ontario requires both on the same day.
Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).