Where to Buy Centrifuge Tubes in Quebec: Case Sizes and Lead Times

Centrifuge tubes ship 500 to a case in both the 15 mL and 50 mL formats, so a Quebec lab ordering them should size the order from weekly draw rather than from the last invoice. A lab running 200 tubes a week uses one 500-piece case every two and a half weeks, which puts a two-case par at about five weeks of cover. The Sterile Centrifuge Tubes 15 mL — Graduated, Screw Cap, 500/Case15 mL centrifuge tubes, 500 per case are the usual reference line for that calculation.

What case sizes and formats are available?

The standard case is 500 tubes, either loose in bags or racked, and either sterile or non-sterile. The 15 mL and 50 mL formats are the two workhorses; conical bottoms are standard, and self-standing versions exist for protocols that need the tube to stand upright.

15 mL centrifuge tubes, 500 per case

Caps matter as much as volume. Screw caps with a plug seal hold better through centrifugation than a plain cap, and printed graduations matter if the protocol relies on reading volume rather than weighing.

How many tubes does a lab use per week?

Count racks, not tubes. A rack of 50 filled twice a day across three benches is 300 tubes a day, which is 1,500 a week and three cases a week. That is a very different order rhythm from a single-bench lab at 200 a week.

100 by 15 mm polystyrene petri dishes, 320 per case

Count the 15 mL and 50 mL formats separately. They usually move at a ratio of about two to one, and ordering them in equal quantities leaves one format short and the other overstocked.

Format Case count Typical weekly draw Par
15 mL conical 500 200 to 300 2 cases
50 mL conical 500 100 to 150 1 to 2 cases
Self-standing 50 mL 500 Protocol dependent 1 case

What lead time should a Quebec lab plan for?

Ask whether the case ships from Canadian stock or from a factory order. The difference between two days and six weeks is common on lab plastics, and a reorder point built on the wrong one produces either excess stock or a stopped run.

Record the actual delivery dates for the first few orders and plan on the longest. Published windows usually describe dispatch, not arrival, and freight consolidation adds days that no quote shows.

How should tubes be stored and rotated?

Keep cases sealed until the rack is needed, off the floor, and away from direct sun. Sterility is a property of the sealed packaging, so a case opened early and left on a bench becomes general lab plastic for most protocols.

Rotate first in, first out and record the lot number against the run. When a batch of plates or tubes behaves unexpectedly, the lot number is the first thing anyone asks for and the last thing anyone writes down.

Where can a Quebec lab buy tubes in case quantities?

Case quantities come from a Canadian distributor, and the invoice should show the volume, the cap type, the sterility status and the lot number. Those four fields make the receipt check quick and the traceability possible.

Labs ordering tubes alongside dishes, pipettes and specimen containers can consolidate through wholesale and multi-site ordering, which keeps case counts and delivery schedules on one document. Reselling? become a distributor.

Related reading

sterilization monitoring collection; centrifuge tube case sizes for Canadian labs; specimen bag formats and case sizes in Quebec; wholesale and multi-site ordering

Print the monthly supply checklist, size the next order with the clinic supply planner, and set up wholesale ordering so case pricing and account terms sit on one invoice.

Frequently Asked Questions

How many centrifuge tubes are in a case?

500 in the standard case for both 15 mL and 50 mL formats, sometimes racked and sometimes in bags.

Does the cap type matter for centrifugation?

Yes. A screw cap with a plug seal holds better than a plain cap, and the tube rating should be checked against the protocol speed.

Should I order sterile or non-sterile tubes?

Order what the protocol requires. Sterile tubes cost more, and opening a case early for a non-sterile use wastes the difference.

CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.