Sterile Centrifuge Tubes Bulk Order in Canada: 15 mL and 50 mL Case Sizes

Short answer: Canadian labs order sterile centrifuge tubes by the case, with 500 tubes per case the common format for both 15 mL and 50 mL conical tubes. The choice between the two volumes follows the protocol, not the shelf: 15 mL suits cell pellets and small aliquots, while 50 mL is used where the protocol needs working volume and headspace.

Start with the Sterile Centrifuge Tubes 15 mL — Graduated, Screw Cap, 500/Case15 mL sterile centrifuge tube, 500 per case for routine aliquoting, and move to the 50 mL sterile centrifuge tube, 500 per case where the protocol specifies a larger working volume.

15 mL or 50 mL centrifuge tubes: how does a lab decide?

Two questions settle it. First, what volume does the protocol need in the tube at the point of centrifugation, including any dead volume below the pellet. Second, what does the rotor accept. A 50 mL tube that only ever holds 10 mL wastes rack space and forces a larger rotor, while a 15 mL tube used near its maximum leaves no room for mixing.

How many tubes come in a case?

Both the 15 mL and the 50 mL sterile tube ship 500 per case in the format we stock. Case counts vary between manufacturers, so confirm the number on the quote rather than assuming that two cases of different products hold the same quantity.

CliniEco Medical Class 4 dual-indicator sterilization pouches, 200-pack, used for packaging and integrity control in a sterile processing suite
Format Case Typical use What to confirm
15 mL conical, sterile 500 Cell pellets, small aliquots, sample splitting RCF rating against your rotor
50 mL conical, sterile 500 Working volumes, media, larger aliquots RCF rating and cap style
Graduated tube 500 Any volume read at the bench Graduation visibility after labelling

What should a lab check before a bulk order?

  • RCF rating. Confirm the tube's rated relative centrifugal force against the rotor you will use, including any derating for the rotor type.
  • Cap style. Screw caps and plug seals are not interchangeable in a protocol that specifies one.
  • Sterility and lot. Record the lot number on arrival so a contamination question can be traced to a case.
  • Graduations. Check they remain readable after your label is applied, not just when the tube is new.
  • Storage. Keep cases off the floor and out of direct sunlight; sterility depends on the packaging staying intact.

What lead time should a Canadian lab plan for?

In-stock Canadian cases ship in 3 to 7 business days depending on province. A mixed pallet that combines tubes with pipette tips, dishes and other consumables is assembled before dispatch, so allow additional days. Set the reorder point at the lead time plus two weeks of usage: a tube shortage stops a run in a way that is hard to work around.

How should tube stock be counted?

Count in cases, not in loose tubes, and reconcile against runs rather than against calendar months. A lab that runs twice a week uses tubes in a lumpy pattern, and a par level based on a smooth monthly average will run dry in the middle of a busy week.

Do centrifuge tubes have a shelf life?

Sterile packaging has a shelf life and the plastic itself has a service life under repeated autoclaving. Single-use sterile tubes are used once and discarded, so the practical limit is the packaging date and your storage conditions. Rotate the oldest case to the front and check the date on arrival.

Related Reading

For the volume decision, read 15 mL versus 50 mL tube stocking. For handling detail, see centrifuge tube volume graduations, and for shelf life read do centrifuge tubes expire.

Pair of blue nitrile examination gloves laid out flat for a care or housekeeping task

Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

Track case counts on the printable lab consumables log, and run the supply planner against your run schedule. Want a mixed lab quote? Request a bulk quote or ask a compliance specialist.

Related Reading

Frequently Asked Questions

How many tubes are in a case of sterile centrifuge tubes?

The 15 mL and 50 mL sterile formats we stock both ship 500 per case. Case counts differ between manufacturers, so confirm the quantity on the quote before comparing price per tube.

When should a lab use a 50 mL tube instead of 15 mL?

When the protocol needs a larger working volume plus headspace, or when the rotor takes 50 mL carriers. If the sample only ever fills a few millilitres, a 15 mL tube uses rack space more efficiently.

Do centrifuge tubes have a shelf life?

The sterile packaging carries a date and the tube has a service life under repeated autoclaving. Single-use sterile tubes are used once, so the date on the packaging and your storage conditions set the practical limit.

What should be recorded when a case of tubes arrives?

The lot number, the delivery date and the storage location. If a contamination question arises later, that record is what links a run back to a specific case rather than to the whole shelf.

CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.