In Ontario, the RCDSO requires a biological indicator for each sterilizer on every day it is used — daily monitoring, not weekly. The weekly baseline is the CDC / AAMI ST79 standard in most US states. So test every sterilizer on every day it runs a load, log the result, and treat once-a-week testing as a US reference point, not an Ontario rule.
Quick facts
- Ontario dental practices monitor each sterilizer on every day it is used.
- Most US states use a once-a-week baseline from CDC guidance and AAMI ST79.
- Daily monitoring is about 250 indicators per sterilizer per year.
- A biological indicator verifies the process; it does not release a load.
- Logs carry date, sterilizer, result and corrective action.
What a spore test actually verifies
A biological indicator is a vial or strip carrying a known population of bacterial spores — for steam sterilization, Geobacillus stearothermophilus, chosen because it resists saturated steam more than the organisms you are trying to kill. After the cycle the vial is incubated: no growth means the cycle delivered lethal conditions where the indicator sat.
That places it above your other checks. Tape and chemical indicators show only that a package saw heat, steam and time; our explainer on biological indicator kill time covers how the spore population shapes a result.
Ontario's daily rule vs the US weekly baseline
This is where Canadian and US advice most often gets mixed: a manager reading a US blog finds a once-a-week rhythm and assumes it applies here. In Ontario it does not.
| Aspect | Ontario (RCDSO expectation) | Most US states (CDC / AAMI ST79) |
|---|---|---|
| Monitoring rhythm | Every day the sterilizer is used | Once per calendar week |
| Indicators per sterilizer per year | About 250 (5 days × 50 weeks) | About one per week |
| Where the expectation comes from | Provincial guidance for Ontario | State rules plus CDC and AAMI ST79 |
Read it as a compliance map, not a quality ranking — both baselines catch a failing sterilizer before a patient is exposed.
The consumable math: 250 indicators per sterilizer per year
A clinic that sterilizes five days a week over 50 weeks has 250 sterilizer-days, so the daily rule costs roughly 250 biological indicators per sterilizer per year — not 52.
A 25-pack covers ten to twelve working days for one unit, so plan ten packs per sterilizer each year and set your reorder point there.
The CliniEco 24-hour biological indicator 25-pack gives five indicators to start with shipping included; the 24h self-contained 25-pack matches the annual math.

What a 24-hour readout changes
Paper spore strips are read at 48 hours; a self-contained indicator is read at 24. Once you test daily, that gap is the whole workday.
Run the indicator in a full load, incubate it in a dedicated incubator, record the outcome, and quarantine loads from that sterilizer after a positive result. Our spore test FAQ on incubation and failed results covers the follow-up.

Documentation an inspector asks to see
A log entry that survives review carries the date, sterilizer ID, load reference, indicator result and, after a failure, the corrective action taken before the unit returned to service. Read the Public Health Ontario sterilization log requirements first.
The sterilization compliance hub collects the monitoring, packaging, logging and training pieces in one place.
Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers.
The Ontario rule is a daily one for each cycle type, and that is the number a practice has to plan its indicator stock around. Clinics, long-term care homes and labs in Canada can request the 24-hour biological indicator 25-pack — shipping is covered, and five indicators cover five test days.
Related reading
Three companion pieces for building or auditing a monitoring routine:
- Biological Indicator Kill Time Explained
- Autoclave Spore Test FAQ: Incubation and Failed Results
- Public Health Ontario Sterilization Log Requirements
- Rapid Readout Biological Indicator Readers: Every Major Brand Compared (2026 Canada Price Guide)
- BI vs Chemical Indicators: What's the Difference in Sterilization Monitoring?
- The Real Annual Cost of Biological Monitoring: Locked Ecosystems vs Open-System BIs in Canadian Dental Clinics
- sterilization compliance log sheet (free tool)
- printable autoclave sterilization log sheet (free)
Frequently Asked Questions
How often do I need to do a spore test in a dental office in Ontario?
Every day the sterilizer is used — about 250 indicators per unit per year for a five-day clinic.
Does one biological indicator cover every sterilizer in the clinic?
No. Monitoring attaches to each unit, so two sterilizers mean two indicators per day and roughly 500 a year.
How many biological indicators should a clinic order per year?
Multiply operating days by sterilizers: 250 indicator-days per unit, or ten 25-packs per sterilizer per year.
What should we do when a spore test fails?
Quarantine the affected loads, stop releasing from that sterilizer, re-run an indicator and check for overload, short dry time or a worn door gasket.
CliniEco Medical is a licensed medical device establishment (MDEL #35334).
Where to Buy Sterilization Monitoring Supplies in Canada
CliniEco Medical supplies these from Ontario with published CAD pricing (MDEL #35334) — no quote required, and each pack ships with the lot number printed on it so your monitoring record stays traceable.
| Format | Pack size | Price (CAD) | |
|---|---|---|---|
| 24-hour self-contained BI | 25-pack | $69.99 | 24-hour self-contained biological indicators — 25-pack |
| 24-hour self-contained BI | 100-pack | $189.00 | 24-hour self-contained biological indicators — 100-pack |
Round Out Your Sterilization Setup
A biological indicator is one link in the chain — these are the pieces it works with:
- Sterilization pouches — Class 4 dual-indicator, 200-pack — the packaging the indicator rides inside
- Autoclave indicator tape — 3-roll set — the external chemical indicator on every pack
- Class 5 chemical integrators — 100-pack — the in-pack check that pairs with your biological indicator
- Sterilization roll — 50 m pre-cut sheets for larger instruments
- Constant-heat pouch sealer — 200 °C, 12 mm seal — for consistent pouch closures
Which format does your sterilizer actually need?
Match the readout time to how fast you need the result: a 24-hour self-contained indicator works in any gravity or pre-vacuum cycle with a standard incubator, while a 3-hour fluorescence tube needs the matching reader. Running one cycle type per day, the 25-pack covers a month; busier clinics move to the 100-pack and cut the per-test cost.
How much do spore tests cost in Canada?
Published pricing runs $2.80 per test on the 25-pack down to $1.89 on the 100-pack — no distributor quote, no account needed.
Not sure which format your sterilizer needs? Generate a free sterilization log sheet first — it maps your cycles and tells you the pack size that fits. Questions about your setup? Ask a Compliance Specialist.