Medical Supply Guide

Featured Reading

Sustainable Medical Supplies: PLA Biodegradable Products for Canadian Healthcare Facilities

Massage Therapy & Recovery Devices for Canadian Physiotherapy Clinics and Home Care
A clinician wearing a bouffant cap and a 3-ply face mask together
Bouffant Caps and Face Masks Together: What Layers Protect What
Bouffant Caps and Face Masks Together: What Layers Protect What Canada runs its clinics differently from a US operating room, but the supply-room question is the same. There is a... Lire plus...
ASTM F2100 Level 1 vs Level 2 vs Level 3 Masks: Choosing by Exposure Setting
ASTM F2100 sets performance levels for medical face masks across five properties. Level 1, 2 and 3 differ mainly on fluid resistance, and the correct choice depends on the fluid risk in the setting where the mask is worn, not on which level sounds strongest.The distinction matters commercially as much as clinically. Buying Level 3 for a reception desk pays for fluid protection that interaction never needs, while buying Level 1 for a procedure with expected splashing leaves the wearer under-protected for the task.What does each level actually change?All three... Lire plus...
CliniEco disposable 3-ply medical face mask shown flat with ear loops
ASTM F1862 Explained: Blood Penetration Resistance for Face Masks
ASTM F1862 Explained: Blood Penetration Resistance for Face Masks Quick Summary: ASTM F1862 is the test behind every "fluid resistant" claim printed on a medical face mask box. It projects... Lire plus...
Single three-ply medical mask with ear loops held against a plain background
How PFE Is Measured on a Medical Face Mask: ASTM F2299
How PFE Is Measured on a Medical Face Mask: ASTM F2299 Two numbers appear on almost every medical face mask report, and buyers often treat them as interchangeable. They are... Lire plus...
Blue pleated medical face mask with ear loops held against a white background
BFE Testing for Face Masks: What ASTM F2101 Measures
BFE Testing for Face Masks: What ASTM F2101 Measures A clinic does not buy a mask because of its filtration number alone, but the number is what tells a buyer... Lire plus...
CliniEco 3-ply procedure masks in sealed packaging
Neck Loop vs Ear Loop Face Masks: Which Fits Clinical Work
Neck Loop vs Ear Loop Face Masks: Which Fits Clinical Work A mask order rarely turns on filtration alone, because most clinic masks already carry the same material claim. The... Lire plus...
Campus Health Centres: Consumable Planning for Student Clinics
Campus Health Centres: Consumable Planning for Student Clinics Quick Summary A campus health centre treats a young, mobile population on a schedule driven by the academic calendar, producing sharp peaks and quiet stretches rather than steady volume. The consumable categories are the same as any primary care clinic, but the ordering rhythm is not: flu season, orientation week and exam periods each pull different products. This Q&A covers the questions purchasing leads at Canadian college and university health centres ask when they rebuild a supply list. What makes campus demand... Lire plus...
Barbershop Hygiene Routines: Gloves, Masks and Surface Sanitizing
Barbershop Hygiene Routines: Gloves, Masks and Surface Sanitizing A busy barbershop chairs ten or more clients a day, and the tools between those clients travel from head to head: clippers, razors, combs, and towels. Provincial regulations in Canada require barbershops to disinfect reusable tools between clients and to follow basic sanitation practices, but the day-to-day routine is where compliance either happens or falls apart. This guide covers the disposable hygiene supplies that make a defensible barbershop routine simple to follow. Gloves: When Do Barbers Actually Need Them? Barbers do not... Lire plus...
ASTM F2100 in Practice: BFE, PFE and Fluid Resistance Testing
ASTM F2100 in Practice: BFE, PFE and Fluid Resistance Testing Quick Summary: ASTM F2100 is the consensus standard that defines how medical face masks are classified in Canada and the United States, using four laboratory tests — bacterial filtration efficiency (BFE), particulate filtration efficiency (PFE), fluid resistance, and differential pressure (breathability). A mask's Level 1, 2, or 3 designation is not a marketing tier; it is the outcome of these standardized tests. For Canadian clinics that specify masks for clinical use, understanding what each test measures is the difference between... Lire plus...
PHA Face Masks: Biodegradable PPE for Eco-Conscious Facilities
A clinic manager in Ottawa recently asked us a pointed question: is there a mask that fully biodegrades after a shift, without compromising protection? The honest answer is not yet — but Polyhydroxyalkanoates (PHA) face masks are the closest thing to it. Here is what the research says, where the gaps are, and how PHA compares with the masks you can order today. What Are Polyhydroxyalkanoates (PHA)? Polyhydroxyalkanoates (PHA) are polyesters that bacteria produce naturally, storing them as energy reserves while fermenting plant sugars, waste oils, or other renewable feedstocks.... Lire plus...
Medical Face Mask Standards in Canada: ASTM F2100 Levels, Health Canada Authorization, and Hospital Procurement Decisions
For healthcare facilities seeking reliable supply, the clinieco-medical-face-masks-3-ply-astm-level-1-procedural-mask represents a Health Canada-authorized option manufactured to ASTM F2100 specifications. ASTM F2100 Levels Explained: Level 1, Level 2, and Level 3 ASTM F2100 establishes three performance levels for medical face masks, each suited to different clinical scenarios: ASTM Level 1 (Low Barrier): Provides a BFE ≥ 95% and fluid resistance of 80 mmHg. These are recommended for general procedures, surgical admissions, and low-risk settings where no significant fluid exposure is expected. Level 1 masks offer the highest breathability (MDR ≤ 4.0), making... Lire plus...
Face Mask Supply Planning: How Many Masks Does Your Canadian Clinic Need Per Month?
Planning Your Clinic's Mask Consumption One of the most common questions we hear from Canadian clinic managers is: "How many masks should I order per month?" The answer depends on your clinic's size, patient volume, procedure mix, and whether you're planning for routine use or surge capacity. Effective mask supply planning prevents both shortages (which compromise safety) and overstocking (which ties up budget and storage space). Let's walk through a practical framework for calculating your clinic's monthly mask requirements. Step 1: Calculate Your Daily Mask Consumption Start with the basics.... Lire plus...
ASTM Mask Levels Explained: Level 1, 2 & 3 — Which Does Your Canadian Clinic Need?
What does the ASTM F2100 standard test? For Canadian healthcare facilities, selecting the right surgical mask isn't just about comfort—it's about compliance with infection control standards. The ASTM F2100 standard is the benchmark for medical face masks in North America, classifying masks into three performance levels: Level 1, Level 2, and Level 3. Each level corresponds to increasing protection against fluid penetration, bacterial filtration efficiency (BFE), and particulate filtration efficiency (PFE). Whether you're managing a dental clinic, a family practice, or a walk-in clinic in Canada, understanding these distinctions is... Lire plus...
ASTM Mask Levels 1-3: PFE & Fluid Resistance for Clinics
ASTM Mask Levels 1-3: PFE & Fluid Resistance for Clinics
If there's one piece of PPE that creates more confusion than any other in my line of work, it's the face mask. Not because it's complicated—but because the terminology has... Lire plus...