Nitrile Exam Gloves Supplier for Dental Clinics in Ontario: What to Verify Before You Order

Aurelia Protege nitrile exam gloves, 4.0 mil medical grade, sky blue, dispenser box of 100

Nitrile Exam Gloves Supplier for Dental Clinics in Ontario: What to Verify Before You Order

Gloves are the item an Ontario dental clinic buys on repeat without looking at the paperwork twice, which is why a poor supplier relationship survives so long. The failure is rarely a bad glove. It is a case in the wrong size, a box with no lot number, or a company that cannot produce a licence when a patient asks where the gloves came from.

The line this checklist is built around is the Protege nitrile exam glove, 4.0 mil, powder-free and latex-free, 1,000 gloves per case as ten dispenser boxes. What takes time is verifying the six points below before the first order, not the twenty-fifth.

What licence does the supplier need before you order?

An establishment licence under the Medical Devices Regulations. Importing or distributing medical devices in Canada requires one, and the number is public record: it can be matched to the company on the invoice rather than accepted as a phrase in an email.

Which standard should appear on the box?

CliniEco nitrile exam gloves, 3.5 mil standard, blue, ten dispenser boxes to a 1,000 glove case

ASTM D6319, the specification for nitrile examination gloves for medical use. It sets dimensions, tensile strength after accelerated ageing and the pinhole acceptance limits that make a glove a medical glove rather than a blue glove. Where a chemotherapy claim is made, the permeation performance sits in ASTM D6978 and the claim should name it.

What does 4 mil mean, and what does it not mean?

It means the film is about 0.10 mm thick before it is stretched onto a hand. It does not mean twice the protection of a 2 mil glove, because barrier performance in a nitrile exam glove is a pinhole and tensile question answered by the standard. What thickness changes reliably is fit, tactile feedback and how the glove behaves. A 3.5 mil standard blue glove, 1,000 per ten-box case suits examination work, and the 4.5 mil fully textured glove suits heavier wet work where texturing matters more than film.

What to verify Where it shows up Why it matters
Establishment licence Number on file, matched to the invoice Distribution is legal and traceable
Standard on the box ASTM D6319, plus D6978 if chemo-rated Separates a medical glove from a general one
Size per case One size per case in this range A team in M and L needs two cases
Lot and expiry Printed on the dispenser box A recall question is answerable in minutes
Storage Cool, dry, away from ozone sources Nitrile degrades before expiry otherwise

Aurelia Protege nitrile exam gloves, 4.0 mil medical grade, sky blue, dispenser box of 100

How should the first order be sized?

Count gloved contacts per chair per day, add the staff who glove up for cleaning between patients, and convert to boxes on a four-week cycle. Order one case per size the team actually wears.

What belongs on the order sheet?

Product name, mil figure, size, gloves per box, boxes per case, lot requirement and the ASTM reference. Written that way a reorder is a document rather than a memory, and a substitute from another supplier can be compared field by field.

Running a dental practice? The dental practice supply line lists gloves, bibs and chairside consumables as one orderable set for Ontario practices.

Ordering for a clinic, a lab or a care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

References

  1. Medical Devices Regulations (SOR/98-282), section 44 - establishment licence before importing or distributing a medical device (checked 19 November 2026)
  2. Health Canada - Guidance documents for medical devices, including labelling requirements (checked 19 November 2026)

Printable companion: the consumable receiving and lot log has the fields for lot number, expiry and size per case, which is what makes a glove recall answerable in minutes.

Buying gloves by the case and not sure which year that works out to? The clinic supply planner converts gloved contacts per day into cases per year.

Related Reading

Frequently Asked Questions

How do I verify a gloves supplier is legitimate?

Ask for the establishment licence number. Importing or distributing medical devices in Canada requires a licence under the Medical Devices Regulations, and the number is a public record that can be checked.

What standard covers nitrile exam gloves?

ASTM D6319, the specification for nitrile examination gloves for medical use, covers dimensions, tensile strength after ageing and pinhole acceptance limits. A chemotherapy claim adds permeation testing to ASTM D6978.

Does a thicker glove mean a safer glove?

Not by itself. Thickness changes fit and tactile feedback as much as barrier, and the acceptance limits in ASTM D6319 apply regardless of the mil figure. Match the glove to the task.

Can a case hold mixed sizes?

In this range, no. A case is ten dispenser boxes in a single size, so a team wearing M and L buys two cases. A mixed-carton assumption produces a shortage in one size and a surplus in the other.

Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.