The short answer for a single-chair dental practice in Ontario is about 1,000 nitrile exam gloves a month, which is one case of ten 100-glove boxes, and roughly ten boxes opened on the shelf. The figure moves between 0.7 and 1.4 cases a month across the appointment volumes a single chair can actually carry, so the useful answer is not one number but the three-input model behind it: appointments per day, pairs per appointment, and clinical days per month. Every input except one is fixed by guidance rather than by preference.
The glove the arithmetic is priced in is a 1,000-glove case in ten 100-glove boxes, one size per case, such as the Aurelia Transform 100 Nitrile Exam Gloves — 3.2 mil, Medical Grade, Ice Blue, 1,000 Gloves per Case (10 × 100). A practice doing procedures that snag a thin film, or handling a cytotoxic drug, prices the heavier Aurelia Protégé Nitrile Exam Gloves — 4.0 mil, Medical Grade, Sky Blue, 1,000 Gloves per Case (10 × 100) instead; the count does not change, only the wall does.
Quick facts on monthly glove use in a single-chair Ontario practice
- Ontario requires a new pair for every patient: the same pair must not be used for more than one patient.
- A single chair at twelve appointments a day, 21.7 clinical days a month, two pairs each, consumes about 1,042 gloves a month.
- That is one 10 x 100 case a month, or about ten boxes opened, not one box.
- A case holds one size only, so a two-size team splits the order rather than doubling the case count.
- Medical gloves are Class II devices in Canada and need a manufacturer licence; the same glove is Class I in the United States.
How many 10 x 100 boxes does a single-chair practice open in a month?
Multiply three inputs. Appointments per clinical day sets the exposure count, two pairs per appointment sets the glove count per exposure, and 21.7 clinical days a month converts the day into the month. Two pairs is the working convention in this calculation: one pair for the procedure and one for breaking the tray down afterwards, which matches the requirement that gloves are removed and discarded immediately after the activity for which they were put on.
| Appointments per day | Appointments per month (21.7 days) | Pairs per month (2 each) | Gloves per month | 10 x 100 cases per month |
|---|---|---|---|---|
| 8 | 174 | 348 | 696 | 0.7 |
| 12 | 260 | 521 | 1,042 | 1.0 |
| 16 | 347 | 694 | 1,389 | 1.4 |
| 20 | 434 | 868 | 1,736 | 1.7 |

Read the last column as the buy, not the stock. A practice at sixteen appointments a day does not order 1.4 cases; it orders one case most months and two cases in the months with five full working weeks, which over a year averages out to the table. The box line matters because gloves leave the storeroom by the box, and ten boxes is a case: a single chair opens roughly one box every two working days.
The 21.7-day month is 260 working days spread over twelve months. That figure already contains Ontario's public holidays, which are set out in the province's public holiday schedule; a practice that also closes for a week in summer and a week at the end of the year should use 21 days rather than 21.7 and will find the monthly glove figure moves down by about three per cent, which is inside the rounding of the case count.
Why does the chair, and not the sterilizer, set the glove order?
Because a chamber never meets a patient. The sterilizer count constrains how many instrument kits can be turned around in a day, and a practice whose schedule is packed against one chamber will feel the ceiling in the appointment book before it feels it in the glove drawer. The chair is the throughput unit that the appointment book is written against: one chair, one patient at a time, which is what makes appointments per day the first input rather than the number of treatment rooms.
That is why the model transfers across practice sizes once it is expressed per chair, and why a four-chair practice with one sterilizer can land close to a single-chair practice on gloves per chair per month. What does not transfer is the size split, and the sterile surgical line, which is a different device with a different pack count.
What counts as a glove change in an Ontario dental office?
The rule is written in the Royal College of Dental Surgeons of Ontario standard on infection prevention and control: gloves must be worn when contact with mucous membranes, non-intact skin or body fluids is anticipated, the same pair of gloves must not be used for more than one patient, gloves must be put on immediately before the activity for which they are indicated, and gloves must be removed and discarded immediately after that activity, followed by hand hygiene. The same standard notes that gloves are not completely free from leaks and may tear, so their use does not replace hand hygiene.
Three consequences follow for the monthly number. First, every patient contact is at least one pair, which is the floor of the model and the reason the count scales with appointments rather than with hours. Second, the second pair for tray breakdown is a routine step rather than an exception, because handling contaminated instruments after the patient leaves is a separate activity. Third, a torn or visibly soiled glove is replaced mid-appointment, which is the main source of drift above the table.
Ontario's public health guidance takes the same position for reprocessing tasks, where gloves appropriate to the task are part of the personal protective equipment worn when handling contaminated equipment and devices, and hand hygiene is required after glove removal. The two documents together are the reason a glove count can be built without asking staff to record anything: the change points are the appointment boundaries.
How do you split one case across sizes when a case holds a single size?
This is where the box count and the case count part company. A case is ten boxes of one hundred gloves in one size, not a mixed carton, so a team wearing medium and large needs two case lines. The practical split for a single chair is to hold the two dominant sizes at case quantity and let the minority sizes ride on a shared box, because the minority size draw is usually a box a month rather than a case a month.

| Size position in the team | What to hold | Why |
|---|---|---|
| Two dominant sizes (for example M and L) | One case each, replenished as the case empties | Each case is a single size, and a month draws about half a case per dominant size at twelve appointments a day |
| Third size worn by one or two people | One to two boxes alongside the dominant case | The monthly draw is under a case, so a case would age on the shelf |
| Surgical and specialty gloves | Counted separately from exam gloves | Sterile gloves are a different device and a different pack count, and they are not part of this model |
A case bought for a dominant size is drawn before it ages, but a fourth size at case quantity is capital sitting in a cupboard. That is why a single-chair order looks like two case lines and two box lines rather than four case lines.
How does Canada differ from the United States on the glove itself?
The volume model is similar on both sides of the border because the clinical rule is similar: a new pair per patient, hand hygiene around it, and no washing and reusing. The regulatory classification is not similar, and it is the part that surprises purchasers who compare a Canadian listing against an American one.
| Item | Canada | United States |
|---|---|---|
| Device class of a nitrile exam glove | Class II medical device, whatever the material, sterile or non-sterile | Class I device under 21 CFR 880.6250 |
| Premarket route | Manufacturer holds a Health Canada medical device licence; the importer holds an establishment licence | Premarket notification applies to patient examination gloves; only finger cots are exempt under the same section |
| Change rule | New pair for each patient; hand hygiene before donning and after removal | New pair for each patient under the bloodborne pathogens standard and CDC guidance |
| What the buyer can check | The manufacturer's licence and the importer's establishment licence number | Establishment registration and listing in the FDA database |
Health Canada's own notice on medical gloves states the position without qualification: medical gloves are Class II devices, and that is the case whether the gloves are latex, vinyl, synthetic polymer or nitrile, and whether they are sterile or non-sterile. The notice adds that a manufacturer must hold a medical device licence before the gloves can be imported or sold. The American rule reads the other way on class: the non-powdered patient examination glove is a Class I device, and the premarket notification exemption in that section is written for finger cots. A buyer comparing a Canadian and an American listing is therefore comparing two different regulatory files, not two versions of the same one.
Ontario adds a workplace duty in addition to the device rules. The Occupational Health and Safety Act requires employers to take every precaution reasonable in the circumstances for the protection of a worker, which is the provision that sits behind a written glove policy in a dental office. The practical sentence for a purchaser is that the glove has to be a licensed medical glove in Canada, and the policy that says when it is changed has to exist in writing.
What should the monthly par level be?
Par is the model plus a lead-time buffer, and the buffer is set by delivery rather than by fear. For a practice drawing one case a month, a par of two cases (twenty boxes) covers a missed delivery without turning the storeroom into a warehouse, and a par of three cases is only justified where the supplier's lead time runs past three weeks or where the practice cannot split an order across sizes later.
The reorder point is the figure worth writing on the shelf label: reorder when the open case plus unopened cases fall below one month of draw plus one week. At twelve appointments a day that is roughly 1.25 cases, which in practice means ordering when the second-to-last case is opened. A practice that orders on the last box instead will run a short week every quarter, and it will run it on the size that is hardest to borrow.
What moves the count away from the model?
Four things move it, and only one of them is about the glove. The first is case mix: orthodontic wire changes, endodontic isolation and anything that requires leaving the operatory mid-appointment add glove changes that are not appointment boundaries. The second is staffing: a chairside assistant who changes gloves at setup and again at teardown raises the pairs per appointment above two, and a practice that runs an assistant on every appointment should test the model at three pairs rather than two.
The third is wastage: a box that is dropped, a size that is opened for a locum, gloves used for cleaning tasks that should have utility gloves. The fourth is the separate sterile line, which is a different count and a different pack. Wall thickness sits in none of these: moving from a 3.2 mil to a 4.0 mil glove changes the price per glove and the feel, not the number of pairs.
Two steps can be taken now without waiting for a supplier review, and a clinic that buys case quantities across two sizes can use the institutional account enquiry page to set the size split up as a standing order. A practice can print a glove and consumable draw sheet from the compliance log centre and record the boxes opened each week for a month, which replaces the model with the practice's own draw. The same page hosts a sterilization log generator for the instrument side of the same day, so the two records sit in one place. Where the count needs a second opinion, the sterilization and infection control consultation route takes the practice's own numbers and checks them against the guidance. Reselling? become a distributor.
Related Reading
- How many 10 x 100 boxes of nitrile exam gloves a single-autoclave clinic orders per year in Ontario
- Nitrile exam gloves in 10 x 100 or in cases: what a four-chair dental practice in Ontario buys
- What one glove costs in Canada, read off the case price
References
- RCDSO, Infection Prevention and Control in the Dental Office, glove requirements, page 15 — checked 19 November 2026.
- Royal College of Dental Surgeons of Ontario, infection prevention and control standard — checked 19 November 2026.
- Public Health Ontario guidance on cleaning, disinfection and sterilization in all health care settings, third edition, 2013 — checked 19 November 2026.
- Health Canada, Medical Gloves notice on device class — checked 19 November 2026.
- 21 CFR 880.6250, non-powdered patient examination glove — checked 19 November 2026.
- 29 CFR 1910.1030, bloodborne pathogens, gloves and hand hygiene — checked 19 November 2026.
- Occupational Health and Safety Act, R.S.O. 1990, c. O.1 — checked 19 November 2026.
- Ontario public holidays, employment standards — checked 19 November 2026.
- World Health Organization, guidelines on hand hygiene in health care — checked 19 November 2026.
- ISO 17664-1:2021, information supplied by the medical device manufacturer for processing — checked 19 November 2026.
- CSA Z314:23, reprocessing of medical devices in all health care settings — checked 19 November 2026.
- Infection Prevention and Control Canada — checked 19 November 2026.
Frequently Asked Questions
How many boxes of gloves does a single-chair dental practice use in a month?
About ten boxes, which is one case of ten 100-glove boxes, at twelve appointments a day with two pairs per appointment. The range across a realistic single chair is seven boxes at eight appointments a day to fourteen boxes at sixteen appointments a day. The box count follows the appointment book, so a practice that knows its own daily appointment average can read its own line off the table.
Should the order be in cases or in boxes?
In cases for the two sizes the team wears most, and in boxes for the minority sizes. A case is ten boxes of a single size, so buying each size by the case multiplies the order by the number of sizes rather than by the volume the practice actually draws. The two-case-and-two-box order is the shape that follows the model.
Does a second sterilizer change how many gloves the practice needs?
No. The sterilizer count changes the instrument turnaround ceiling, which can allow more appointments in a day, and the appointment volume is what sets the glove figure. A practice that adds a chamber and does not add appointments buys no additional gloves.
Are vinyl or latex gloves an option in Ontario?
Nitrile is the default in dental offices for two reasons. The RCDSO standard states that latex gloves are not recommended because allergic reactions have been reported with their use, and nitrile gives the chemical resistance that procedures involving methacrylate or cytotoxic drugs require. Whichever material is chosen, medical gloves sold in Canada are Class II devices and must come from a licensed manufacturer.
Can gloves be washed or reused between patients?
No. Ontario guidance is explicit that gloves do not replace hand hygiene, that they may leak and tear, and that the same pair must not be used for more than one patient. Washing a glove does not restore the barrier, and the change point is the patient contact, not the appearance of the glove.
How does the monthly count change if the practice runs an assistant on every appointment?
It rises. The table is built on two pairs per appointment; a chairside assistant who changes gloves at setup and again at teardown takes the working figure toward three pairs, which raises a twelve-appointment day from 1.0 to about 1.5 cases a month. That is the first input a practice should test against its own draw before it changes a standing order.
Device classes, licensing requirements and provincial guidance are cited as published at the time of writing and are amended from time to time, so confirm the version in force for your setting. Consumption figures in this article are planning assumptions built from named inputs, not a measurement of any particular practice, and they are not clinical advice. CliniEco Medical distributes medical consumables under MDEL #35334.