How Do You Write a Purchase Specification for Clinic Consumables?

CliniEco red biohazard waste bag, 30 gallon, leak-proof

How Do You Write a Purchase Specification for Clinic Consumables?

The specification is the document a clinic argues with

Most clinics do not have a purchasing specification. They have a memory of what arrived last time and worked, a price, and a supplier who is trusted. That arrangement holds until the first substitution, the first failed lot, or the first person who orders who was not there when the last order was placed.

A specification changes the conversation, because it moves the question from whether a product is good to whether it meets ten written lines. It is also the only document that lets a clinic reject a delivery without an argument, and the only one that makes two quotes comparable.

This guide sets out what to write for the consumables a clinic buys most often, which test method sits behind each line, and what evidence to ask for so the specification can be checked rather than believed.

The four families that generate most clinic specifications are nitrile exam gloves, 6 mil, black, 1,000 gloves per case, 3-ply ASTM Level 3 face masks in 250-mask cases, Class 4 self-sealing sterilization pouches with a dual indicator and red 30-gallon biohazard waste bags. Each has a different acceptance question, which is why a single template copied across all four fails.

What belongs in a purchase specification for a clinic consumable?

Every line should be answerable from the box, the test report or the invoice. If a line can only be answered by a sales conversation, it is not a specification.

  • Product name, size and unit of sale exactly as the label states them
  • Performance level or the test method the product is bought against
  • Material and construction, where it changes performance
  • Packaging, case count and shelf life expectation
  • Labelling requirements, including the statement of any special storage conditions
  • Evidence to be supplied with each lot, and who holds it
  • Traceability field, meaning the lot or control number format on the carton

The strongest specifications for clinic consumables are short. Six to ten lines, each with a number or a standard reference, survive a staff change. Twenty lines that restate the marketing copy do not.

Which standard should the specification cite for each family?

CliniEco Medical 6 mil black nitrile gloves in a 10-box case

Consumable Line to specify Method or standard behind it
Nitrile exam gloves Length, nominal thickness, tensile strength and elongation before and after ageing, freedom from holes ASTM D6319, with ISO 11193-1 as the parallel international specification
Face masks Filtration efficiency, differential pressure, fluid resistance, flame spread, level claimed ASTM F2100, with ISO 22609 for synthetic blood penetration
Isolation gowns Barrier level claimed, fabric mass per unit area, seam and cuff construction ISO 16604 for penetration resistance, ISO 9073-1 for mass per unit area
Sterilization pouches and rolls Dimensions, film type, indicator class, seal type and seal parameters ISO 11607-1 for materials and systems, ISO 11607-2 for sealing validation, ISO 11140-1 for indicator classes
Biohazard waste bags Gauge in micron and mil, load in kilograms, closure, colour and marking Provincial waste rules and the facility's own waste procedure
Examination and procedure surfaces Mass per unit area and ply structure where absorbency matters ISO 9073-1 for mass per unit area

The grid is deliberately coarse. A clinic does not need to reproduce a test laboratory; it needs to name the test that would settle a dispute, so that a supplier knows which number will be asked for and the buyer knows which number to file.

How do you specify a nitrile exam glove?

Start with the four things that decide whether a glove can be used at all: length, nominal thickness, tensile strength and elongation. ASTM D6319 covers gloves that fit either hand, paired gloves and sized gloves, packaged sterile, nonsterile or bulk nonsterile, and it sets requirements for the required degree of sterility, freedom from holes, physical requirements before and after ageing, powder amount where powder is used, tensile strength and elongation at break.

Two of those requirements are routinely skipped on the data sheets clinics receive. Freedom from holes is a sampling test, not a statement, and it is expressed as an acceptable quality level; a supplier who says the gloves are inspected is not answering the question. Ageing is the other: the standard tests physical properties before and after ageing, which is why a single tensile number is half a result.

Thickness needs its own line because the units travel badly.

Nominal gauge Millimetres
2 mil 0.051 mm
3 mil 0.076 mm
4 mil 0.102 mm
5 mil 0.127 mm
6 mil 0.152 mm

Write the specification in the unit your records use and require the carton to state the same. A 4 mil glove and a 0.10 mm glove are the same product; a 4 mil glove and a 0.08 mm glove are not, and the difference will not be visible in a photograph. It will be visible in the tensile and elongation results after ageing, which is why those two figures belong in the specification rather than a thickness claim alone.

For chemotherapy work the specification needs a fifth line naming the permeation test the glove is claimed against, and for sterile procedures a sixth naming the sterility and packaging requirements. A clinic that uses one glove for everything is buying a compromise it has not written down.

CliniEco Class 4 self-sealing sterilization pouch with dual indicator

How do you specify a face mask level?

Specify the level and the standard together, never the level alone. ASTM F2100 sets out the performance measures behind the level claimed, and a mask sold as Level 3 without a test report behind it is a claim rather than a specification.

Three lines carry most of the weight. Filtration efficiency is measured for bacteria and for particles, and the two results are not interchangeable. Differential pressure is the breathability measure, and it is the number that decides whether staff will wear the mask for a full shift. Fluid resistance is the measure that matters in any procedure where splatter is possible, and it is measured with synthetic blood under the method in ISO 22609.

The fourth line is labelling. Section 21 requires the name of the device, the manufacturer name and address, the identifier, an indication of contents where they are not apparent, the expiry date if the device has one, and any special storage conditions. A clinic that writes those particulars into the specification is specifying the box as well as the mask, which is what makes a receiving check possible.

How do you specify an isolation gown?

Specify the barrier level claimed, the fabric mass in grams per square metre, and the construction details that decide whether the barrier survives a shift: seam type, cuff type, and whether the back closure is a tie or a thumb loop design.

Mass per unit area is the line clinics most often leave vague, and it is the one that can be checked cheaply, because ISO 9073-1 sets out the determination of mass per unit area for nonwovens. It does not tell you the barrier level; a heavier fabric is not automatically a higher level, and a level is a test result rather than a weight. What it does tell you is whether two deliveries are the same product, which is the question that matters at reorder.

Penetration resistance is the performance line, and ISO 16604 provides the method for resistance of protective clothing materials to penetration by blood-borne pathogens. Naming that method in the specification means the supplier knows the clinic will ask for the result rather than the brochure. A specification for a SMMS 40 gsm Level 2 isolation gown, 50 per pack can therefore name the level, the mass and the test method in one line.

How do you specify a sterilization pouch?

CliniEco red biohazard waste bag, 30 gallon, leak-proof

Four lines, and the fourth is the one that gets missed. The first is the dimension in millimetres, written so that the pouch and the instrument set agree. The second is the film type, because paper and film combinations behave differently through a cycle. The third is the indicator class inside the pouch, which ISO 11140-1 defines by type. The fourth is the sealing process: whether the pouch is self-sealing or heat-sealed, and, where the clinic seals, the seal temperature, pressure and dwell that were validated.

ISO 11607-1 covers materials, sterile barrier systems and packaging systems, and ISO 11607-2 covers validation of the forming, sealing and assembly processes. A pouch that is compliant as a material can still fail as a pack if the seal was made outside its validated window, which is why the specification has to name the sealing conditions and not only the pouch.

How do you specify a waste bag?

Write the gauge twice, in micron and in mil, because suppliers quote one or the other and the conversion is where substitutions hide. Then state the load in kilograms the bag will carry, the closure type, the colour required for the stream, and the marking the stream requires. A red bag for biomedical waste and a clear bag for general waste are not interchangeable, and the specification should make that impossible to confuse.

Add a line for the container the bag fits. A bag specified by capacity alone will fit a bin of that nominal size and may not fit the one on the floor, because diameter and height combinations vary between manufacturers.

What evidence should come with the specification?

Document What it proves What it does not prove
Test report for the performance claim The measured values for the property claimed That the whole production run matches the sample
Certificate of analysis or conformity for the lot What the supplier asserts about that lot Anything the certificate does not name
Establishment licence number of the importer or seller That the party selling is allowed to import or sell That the product meets a specification
Safety data sheet, where a chemical is involved Hazards, handling and storage Performance of the product
Recall history, checked in the federal database Whether the company has had a public safety event Anything about the current lot

Two of these are frequently confused. Section 44 requires an establishment licence to import or sell a medical device, with exemptions that include a retailer and a health care facility, and section 52 requires distribution records from the manufacturer, importer and distributor. Neither is a quality certificate. They answer a different question, which is whether the counterparty is in a lawful position to trade, and they should be filed as commercial evidence rather than technical evidence.

How do you write the specification so it survives a reorder?

Keep it to one page, put the version and the date in the header, and attach it to the account rather than to a purchase order. Require the same test method on the reorder, not merely the same product name, because suppliers change sources and a name survives a change of source.

Then make the receiving check mechanical. Count, check the label particulars against section 21, check the lot number format, check the case count and the expiry date, and hold anything that does not match rather than shelving it. A specification that is not checked on arrival is a document that describes an intention.

What makes a specification unenforceable?

Three things. A performance claim with no method behind it, which cannot be tested. A unit that differs between the specification and the carton, which makes every delivery arguable. And a level stated without the standard, which lets a supplier reply that it meets a different one.

A fourth failure is more subtle: a specification that nobody outside purchasing has read. The people who will notice a substitution are the ones opening the box in a treatment room, and they need to know which two or three lines are the ones to check.

Buying for a facility? The wholesale and institutional account desk will match a written specification line to a product and state the case count against it, and the bulk quote desk returns the same line items across two product families so the comparison is like for like. The sterilization pouch range lists sizes and indicator classes in the same order the specification uses.

References

  1. Medical Devices Regulations (SOR/98-282), section 21, label requirements (checked 14 November 2026)
  2. Medical Devices Regulations (SOR/98-282), section 44, establishment licence (checked 14 November 2026)
  3. Medical Devices Regulations (SOR/98-282), section 52, distribution records (checked 14 November 2026)
  4. Medical Devices Regulations (SOR/98-282), section 59, mandatory problem reporting (checked 14 November 2026)
  5. ASTM D6319-19, Standard Specification for Nitrile Examination Gloves for Medical Application (checked 14 November 2026)
  6. ASTM F2100, Standard Specification for Performance of Materials Used in Medical Face Masks (checked 14 November 2026)
  7. ISO 11193-1:2008, Single-use medical examination gloves, specification for gloves made from rubber latex or rubber solution (checked 14 November 2026)
  8. ISO 22609:2004, Clothing for protection against infectious agents, test method for resistance of medical face masks to penetration by synthetic blood (checked 14 November 2026)
  9. ISO 16604:2004, Clothing for protection against contact with blood and body fluids, resistance of protective clothing materials to penetration by blood-borne pathogens (checked 14 November 2026)
  10. ISO 9073-1:2023, Nonwovens, determination of mass per unit area (checked 14 November 2026)
  11. ISO 11607-1:2019, Packaging for terminally sterilized medical devices, requirements for materials, sterile barrier systems and packaging systems (checked 14 November 2026)
  12. ISO 11607-2:2019, Packaging for terminally sterilized medical devices, validation requirements for forming, sealing and assembly processes (checked 14 November 2026)
  13. ISO 11140-1:2014, Sterilization of health care products, chemical indicators, general requirements (checked 14 November 2026)
  14. ISO 13485:2016, Medical devices, quality management systems (checked 14 November 2026)
  15. ISO 10993-1:2025, Biological evaluation of medical devices, evaluation and testing within a risk management process (checked 14 November 2026)
  16. Health Canada, medical devices regulatory overview (checked 14 November 2026)
  17. Recalls and safety alerts, searchable database (checked 14 November 2026)

Printable companion: the SOP and specification templates include a purchasing specification sheet with a column for the test method, so a reorder can be checked against the same ten lines the first order was checked against.

Working out what a line actually costs per case? The clinic supply planner sits alongside the specification, because a price is only comparable once the size, the level and the case count are identical.

Not sure how this applies to your own setup? Ask a sterilization compliance specialist — you’ll get a written answer specific to your equipment and province, with the regulation or standard cited.

Reselling or buying for a facility? become a distributor for wholesale and multi-site ordering.

Related Reading

Frequently Asked Questions

What is the minimum a purchase specification has to contain?

Four things: the product and size as the label states them, the performance level or test method the product is being bought against, the packaging and case count you will receive, and the evidence you expect with each lot. A specification without a test method is a description, and a description cannot be rejected on the receiving dock.

Should the specification repeat the label wording?

Yes, for the identifier and the size. Section 21 of the Medical Devices Regulations sets out what the label must carry, including the device name, the manufacturer name and address, the identifier, the contents where they are not apparent, the expiry date if there is one, and any special storage conditions. Borrowing that wording means the specification, the purchase order and the box all agree.

How do I compare 4 mil and 0.10 mm gloves?

One mil is 0.0254 mm, so 4 mil is 0.1016 mm and 5 mil is 0.127 mm. Convert both figures to the same unit before comparing, and treat a thickness figure as a nominal gauge rather than a promise, because the standard tests that decide acceptability are tensile strength, elongation and freedom from holes, not the number printed on the carton.

Is an unaged tensile figure enough?

No. ASTM D6319 requires physical properties before and after ageing, so a test report that shows only the unaged result has covered half the requirement. Ask which ageing condition was applied and for the results for both states.

Does Canada require ASTM F2100 for masks?

The standard is a performance specification, not a licence. What the regulations require is a lawful label and truthful performance claims, so a supplier selling into Canada has to be able to produce the test results behind the level printed on the box. Buying against ASTM F2100 is a procurement choice that makes those results comparable between suppliers.

What should a pouch specification include?

The dimensions in millimetres with the film type, the indicator class inside the pouch, the seal type, and the validation evidence for the sealing process under ISO 11607-2. If the clinic heat-seals, the specification should also name the seal parameters and the sealer, because a pouch validated at one temperature is not validated at another.

How do I specify a waste bag without naming a brand?

State the gauge in both micron and mil, the load in kilograms the bag is expected to carry, the closure or tie type, the colour and the marking required for the stream it serves. A bag specified only as heavy duty has no acceptance criterion, and a rejected bag has nothing to be rejected against.

What evidence should I ask for with the first order?

The test report for the performance claim, a certificate of analysis or conformity for the lot, the licence number of the establishment that imported the product, and the safety data sheet where a chemical is involved. File all four against the account, because they are what an inspection or a supplier audit will ask to see.

Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.