Articulating Paper in Ontario: Which Thickness to Buy and Sheet Counts per Box

Stack of green two-layer paper dental bibs wrapped in clear film

Quick facts

  • In US federal regulation the device is listed as articulation paper, not articulating paper, under 21 CFR 872.6140.
  • That section describes paper coated with an ink dye, placed between the teeth in the bite position to locate uneven or high areas, and classifies it as Class I.
  • A published in vivo study compared 100, 40 and 12 micrometre papers for detecting occlusal interferences on single-crown restorations.
  • An occlusal indicator product changes the contact it is measuring: interposing it replaces tooth-to-tooth contact with tooth-material-tooth contact.
  • Thickness and format decide how many sheets a practice actually uses per crown, which is what a monthly order should be based on.
  • Paper is a single-patient item; a sheet that has been in a patient's mouth is not reused on the next patient.

Articulating paper looks like a commodity until a crown comes back high, and then the thickness of the paper becomes a clinical variable. This article sets out what the device is in regulation, which thicknesses a general practice actually needs, how the sheet counts on a box translate into patients per box, and how to size a monthly order for an Ontario practice. The dry-field consumables used while a contact is checked are stocked as cotton rolls, 2 medium, 2,000 per box, and the single-use barriers used at the same appointment are stocked as 3-layer paper and PE dental bibs, 500 per pack.

What is articulating paper in regulation?

In the United States the device is described in 21 CFR 872.6140, and the section title is articulation paper. The identification reads as a device composed of paper coated with an ink dye intended to be placed between the patient's upper and lower teeth when the teeth are in the bite position to locate uneven or high areas, and the classification is Class I with general controls (21 CFR 872.6140).

Two details in that section are worth knowing before a purchaser searches a supplier catalogue. First, a search for "articulating paper" in a regulatory index may miss the entry entirely, because the regulatory name is articulation paper. Second, the section exempts the device from premarket notification subject to the limitations in 872.9, and it adds a further exemption from quality-system requirements for devices that are not labelled or represented as sterile, except for record-keeping and complaint files.

That last clause is the one that matters for a product change: a paper sold as sterile is in a different regulatory position from the same paper sold non-sterile, and the difference is created by the label rather than by the paper.

Which thickness should a practice buy?

Thickness is the variable that decides what the mark means. A thicker paper marks under lighter contact and produces broader marks; a thinner paper marks only where the contact is tighter. A published in vivo study compared 100, 40 and 12 micrometre papers on single-tooth porcelain-fused-to-metal restorations in 13 patients and set out to identify the thickness range that marks clinically significant contacts reliably (Oberoi and Hegde, 2025).

The second finding a practice should hold onto is that the paper changes the measurement. Work published in the Journal of Oral Rehabilitation showed that interposing an occlusal indicator product replaces direct tooth-to-tooth contact with tooth-material-tooth contact, so the marks cannot reflect the original contacts exactly (Mitchem et al., 2017). That is not a reason to stop using paper; it is a reason to use one thickness consistently so that the marks are comparable between appointments.

Thickness What it is used for What the mark tends to show Order role in a general practice
About 200 micrometre Rough check of the overall contact pattern Broad, dark marks under light contact Optional; useful for teaching and for denture work
About 100 micrometre Standard occlusal check on restorations and adjustments Clear marks at functional contacts Main stock item
About 40 micrometre Refining a contact after the gross adjustment Narrower marks at tighter contacts Second stock item
About 12 micrometre foil or shim Confirming a single tight contact Very small, precise marks Small quantity, kept for specific cases

A practice that stocks only one thickness should stock the 100 micrometre paper, because it is the thickness the literature most often uses as the reference and the one most adjustment protocols assume. A practice that does a lot of single-crown work benefits from a second, thinner paper for the refinement step.

Stack of green two-layer paper dental bibs wrapped in clear film

What do the sheet counts on a box actually mean?

Six rolls of white cotton roll photographed on a white background

Box counts are quoted in sheets, and the format decides how many contacts one sheet can take. A horseshoe sheet covers the whole arch in one placement; a strip covers a quadrant or a single contact. The practical difference is that a horseshoe is used once per check and a strip can be used for several adjacent contacts in the same check, so a box of strips goes further than the sheet count suggests.

Format Typical count per box Checks per box Waste pattern
Horseshoe, 100 micrometre 50 to 100 sheets 50 to 100 arch checks One sheet per check; a torn sheet is discarded
Strip, 100 micrometre 100 to 300 strips 100 to 300 single-contact checks Strips are cut and partly used, so some loss is normal
Foil or shim stock Rolls or pre-cut pieces Depends on the case mix Reused within the same patient only

The waste pattern column is where a practice loses money without noticing. A horseshoe sheet that is removed, set down on the bracket table and picked up again is a sheet that has been contaminated by whatever was on the table, and it should be discarded rather than returned to the box.

How many boxes does a practice need per month?

The calculation is checks per month divided by checks per box, with a wastage allowance. A practice doing 40 crown seats a month, with three occlusal checks per seat, is doing 120 checks. At one horseshoe sheet per check that is 120 sheets, so two boxes of 100 sheets covers the month with a margin; at 300 strips per box, one box covers it.

Planning input Example What it drives
Crown seats per month 40 Number of adjustment appointments
Occlusal checks per seat 3 Checks per month
Sheets per check 1 horseshoe or 1 to 2 strips Sheet count
Wastage allowance 10% Box count
Storage Dry, room temperature, away from light Maximum stock on hand

Two things shorten the useful life of a box more than use does. Humidity makes the dye transfer inconsistently, and light fades the coating on papers stored on an open shelf. A drawer is a better home than a bracket table.

Which Canadian and US rules apply?

In Canada the paper is a medical device and the practical obligations sit with the practice rather than with the paper: single-patient use, storage that keeps the dye dry, and the infection-control routine for anything that enters the mouth. Provincial guidance in Ontario sets out the cleaning, disinfection and sterilization expectations for instruments and the handling rules for single-use items (PHO provincial guidance).

Point of comparison Canada United States
Regulatory description Medical device under the federal device regulations, class set by the classification rules 21 CFR 872.6140, articulation paper, Class I
Premarket expectation Device licence held by the manufacturer for Class II and above; importer or distributor holds an establishment licence (MDEL) Exempt from premarket notification subject to 872.9
Sterile versus non-sterile The label determines the claim, and a sterile claim changes the regulatory position Section exempts non-sterile product from quality-system requirements except records and complaints
Single-use expectation Set by provincial infection-control guidance Set by federal device labelling plus state practice rules

The Canadian column is deliberately thin on numbers, because the classification of a paper product is settled by its intended use rather than by a published table a buyer can look up. What a buyer can rely on is that the importer holds an establishment licence and can put the number on the invoice.

What should the order specify?

Six fields: thickness in micrometres, format (horseshoe or strip), sheet count per box, whether the product is labelled sterile, the dye colour if the practice uses two colours to distinguish excursions from interferences, and the lot number on receipt. Add the storage instruction from the pack, because a paper that has absorbed humidity in transit marks differently from one that has not.

The dye colour field is worth a sentence of its own. Practices that use two colours usually use one for the initial check and one for the check after adjustment, so that the second set of marks can be distinguished from the first without removing the paper. That is a workflow decision, and it has to be made before the order, not after.

Where the same appointment involves a matrix, the dental dam range and the matrix band selection note cover the isolation side of the same procedure.

Paper is a small line item that decides how often a crown comes back, so it should be ordered on a schedule rather than in a panic. Order through the wholesale programme for case pricing and an account, or become a distributor for resale. The dental bib pack of 500 sits in the same catalogue. Practices that hold bibs, barriers and adjustment consumables on one account tend to standardise the thickness across chairs, which is what makes the marks comparable. Consumables for this line are listed under the department page.

Sources

  1. 21 CFR 872.6140 — Articulation paper, Class I (identification and exemptions)
  2. Oberoi and Hegde, 2025 — occlusal interference markings with articulating papers of varying thicknesses
  3. Mitchem et al., 2017 — does an occlusal indicator product affect contact forces between full dentitions
  4. Provincial guidance for cleaning, disinfection and sterilization in health care settings (PHO)
  5. Public Health Ontario — infection prevention and control topic index
  6. Royal College of Dental Surgeons of Ontario — infection prevention and control standard
  7. Canadian Dental Association
  8. 21 CFR 872.5410 — orthodontic appliance and accessories (device-family comparison)
  9. CCOHS — OSH Answers index
  10. ISO 15189:2022 — quality and competence requirements referenced by laboratory-facing practices
  11. CliniEco — dental wedges: material, size and stocking
  12. CliniEco — dental matrix bands: which class applies
  13. CliniEco — rubber dam clamps: which class applies
  14. CliniEco — dental dam versus rubber dam: are they the same thing
  15. CliniEco — prophylaxis cups: which device rules apply
  16. CliniEco — dental practice department page
  17. CliniEco — dental compliance hub
  18. CliniEco — printable compliance log centre

Adjustment records are what turn a paper order into a clinical file: the printable chairside and adjustment log sheets let the practice record thickness used and the check that followed.

If you would rather generate the sheet, the log generator on the same page builds a per-chair record with the consumables you actually stock.

Ask a compliance specialist at the consultation desk which single-use and labelling expectations apply to your province and your paper format, and the answer is written and cites the rule behind it — no account and no sign-up.

Related reading

CliniEco Medical is a Canadian medical device importer with MDEL #35334. Nothing in this article is clinical advice for a specific patient, and no product in it is presented as a substitute for the instructions supplied with a device.

Frequently Asked Questions

Is the device called articulating paper or articulation paper?

Both names are used in practice, but the US regulatory entry is titled articulation paper under 21 CFR 872.6140. A purchaser searching a regulatory index for the first name may not find the entry at all.

Which thickness should a general practice stock?

About 100 micrometres as the main stock item, because that is the thickness most adjustment protocols assume. A thinner paper at around 40 micrometres is worth adding for refinement, and a 12 micrometre foil is useful for confirming a single tight contact.

Why do two appointments with the same crown give different marks?

Because the paper is part of the measurement. Interposing an indicator product replaces tooth-to-tooth contact with tooth-material-tooth contact, so the marks reflect the paper as well as the contact. Using the same thickness every time is what makes marks comparable.

Can a partially used horseshoe sheet go back in the box?

No. A sheet that has been in a patient's mouth, or set down on a bracket table, is contaminated. Single-use means one patient, and the waste that follows from that is part of the cost per check.

Does the paper have to be sterile?

Not for routine occlusal checking. The US section treats non-sterile product differently from sterile product for quality-system purposes, and the difference is created by the label, so a practice that buys sterile paper is buying a different regulatory object rather than a safer sheet.

How should paper be stored?

Dry, at room temperature and away from light. Humidity makes the dye transfer inconsistently and light fades the coating, both of which show up as marks that do not match the contact.

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.