What an Infection Control Auditor Checks About Mouth Mirrors and Periodontal Probes in Quebec
An audit of a Quebec dental office is a walk-through, not a paper review. The auditor stops at the chair, picks up a mouth mirror and a periodontal probe, and works backwards: what was on the tip, what cleaned it, how it was packed, and which record proves the load ran.
Cleaning is where most of the evidence sits. The CliniEco 4 L benchtop ultrasonic cleaner takes a full diagnostic cassette in one cycle at 32 or 48 kHz, dosed with the multi-enzyme ultrasonic cleaning solution at 1:400 to 1:600, and the debris it lifts out of a mirror thread or a probe groove is what the auditor is looking for under the lens.
How does an auditor classify a mouth mirror and a periodontal probe?
Contact class decides the endpoint, and the classification is written down before the audit ever arrives. Ontario's IPAC dental checklist names mouth mirrors among the semi-critical items that are cleaned and sterilized, and lists periodontal scalers and ultrasonic scaler tips as critical. A periodontal probe is not named in that list, which is exactly where opinions diverge.
| Item | Class in practice | What the auditor inspects | Record that has to exist |
|---|---|---|---|
| Mirror head | semi-critical, contacts mucosa | rim for chips, coating for desilvering | load record for the cycle |
| Mirror handle | depends on the maker's rating | whether it is processed with the head | the instructions on file |
| Periodontal probe | critical, enters the sulcus | markings legible, tip straight, ball intact | load record plus indicator |
| Cassette or tray | carrier, not a device | soil in the hinges and mat | bath log and chemistry change |

What does the auditor look for on the mirror itself?
Two physical faults, both visible without a microscope. A rhodium or silver coating that has begun to desilver at the rim scatters light and hides the surface, and a chipped rim holds soil that no bath will lift. The auditor also separates the two parts: a steam-rated head and a handle rated only for wiping are not one instrument, and processing them as one is a finding.
What does a probe have to show?
A probe earns its place by measuring, so the auditor reads it as a measuring tool. Bands have to be legible to the millimetre, the paint or anodising must not be worn through at the 4 and 5 mm marks, and the tip has to be straight with the ball intact. The ISO 21672 series covers the designation and marking of periodontal probes, and it is the reason two probes from different makers can print their bands in different colours while measuring the same depth. Mixing schemes in one office is not a hygiene failure, but it makes two clinicians' readings incomparable.

How does Quebec's directive treat the trip from chair to sink?
The provincial directives on external reprocessing and transport of medical devices set out a step that is easy to skip: visible soil is wiped off immediately with a 2 by 2 gauze, and the instrument is kept moist with an enzymatic product until it reaches the reprocessing room. A mirror left to dry overnight has a cleaning problem before it is a sterilization problem, and the auditor asks about that interval.
What records does the auditor ask to see?
Three documents, all short. The maker's reprocessing instructions for each item in the cassette, the ultrasonic bath log with its chemistry changes and its performance test, and the sterilizer cycle record that dates the load and carries the indicator result. A practice that can produce those three has answered the whole line.
Ordering for a dental practice or a multi-site group? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.
Running a dental practice? The dental practice supply page groups the ultrasonic chemistry, pouches and record sheets a clinic reorders.
Printable companion: the free compliance log set includes an ultrasonic bath log and a load log; the supply and cost planner sizes bath chemistry against cassette throughput. Ask a compliance specialist if a classification is unclear.
References
- Directives nationales, stérilisation externe et transport des dispositifs médicaux — Ministère de la Santé et des Services sociaux du Québec (checked 12 November 2026)
- IPAC checklist for dental practice, core elements — Public Health Ontario (checked 12 November 2026)
- CSA Z314:23, Canadian medical device reprocessing in all health care settings — scope (checked 12 November 2026)
Related Reading
- Which Mouth Mirrors and Periodontal Probes Should a Quebec Dental Clinic Buy? Selection Checklist
- Periodontal Probes: Markings, Tip Diameter, ISO 21672
Frequently Asked Questions
Do mouth mirrors have to be sterilized after every patient?
It contacts oral mucosa and is semi-critical, so it is cleaned and sterilized between patients rather than wiped over.
Is a periodontal probe a critical instrument?
It enters the sulcus and can meet blood, so a Quebec office processes it as critical, even though the checklist names scalers.
What is the commonest mirror finding?
Desilvering or a chip at the rim, and soil in the thread where head meets handle.
Does the handle go into the same pouch as the head?
Only if the handle is rated for steam; a handle rated for wiping is processed separately.
Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).