Buying the supplies in this guide? Distributed in Canada by CliniEco Medical, Toronto.
Aurelia Protégé Gloves · Aurelia Protégé Nitrile Exam Gloves · Aurelia Robust Gloves · Wholesale & clinic accounts
Products referenced in this guide
Understanding Nitrile Glove Thickness
Where to Buy Nitrile Examination Gloves in Canada
CliniEco Medical supplies examination-grade nitrile gloves to clinics, laboratories, food facilities and care homes across Canada, shipped from Ontario.
| Option | Best for | Order |
|---|---|---|
| 4 mil, blue (100/box) | General examination and short procedures | 4.0 mil nitrile exam gloves, 1,000 per case |
| 6 mil, black (100/box) | Heavy-duty handling, higher puncture risk | 6 mil Black, 100-Pack |
| Case of 10 boxes | Sites going through gloves daily — lowest cost per glove | Wholesale Case, 1,000 Gloves |
| Chemo-grade 4.0 mil | Any handling that may involve cytotoxics | Chemo-Grade, 100-Count |
| Starting a clinic? | Gloves plus spore testing plus packaging in one order | Clinic Starter Bundle |
Ontario and GTA orders ship free over $99; elsewhere in Canada over $199 ($15 flat below). Bulk and standing orders go through a wholesale account. Print a blank sterilization log sheet from our free generator, or book a sterilization compliance review.
Glove thickness is measured in mils (thousandths of an inch) or microns (micrometres). One mil equals approximately 25.4 microns. Here's how thickness affects performance:

Standard Examination Gloves (3–5 mil / 76–127 microns)
These are the most common nitrile gloves used in healthcare settings. At 3–5 mil, they balance tactile sensitivity with adequate barrier protection for medical examinations, patient care, and general clinical tasks. Most medical-grade nitrile gloves fall in this range and are suitable for routine procedures where sharp instruments are not heavily involved.
Heavy-Duty Gloves (6–8+ mil / 152–203+ microns)
Thicker gloves are designed for industrial applications, cleaning, chemical handling, and situations requiring additional puncture resistance. While they offer enhanced protection, thicker gloves can reduce tactile sensitivity, making them less ideal for precision medical work.
Extra-Thin Gloves (2–3 mil / 50–76 microns)
Ultra-thin nitrile gloves prioritize touch sensitivity for tasks requiring fine motor control. However, the trade-off is reduced puncture resistance. These are typically used in specific laboratory or pharmaceutical settings where dexterity is paramount and risks are minimal.
Getting the Right Size
Proper glove sizing is essential for both comfort and safety. Ill-fitting gloves can tear more easily, cause hand fatigue, and compromise barrier protection. Measure the circumference of your dominant hand around the palm (just below the knuckles, excluding the thumb):
- Extra Small (XS): 6–7 inches (15–18 cm) palm circumference
- Small (S): 7–8 inches (18–20 cm)
- Medium (M): 8–9 inches (20–23 cm)
- Large (L): 9–10 inches (23–25 cm)
- Extra Large (XL): 10–11 inches (25–28 cm)
When a glove fits correctly, the fingers should reach the tips without excess material at the ends, and the palm should feel snug without being restrictive. For CliniEco nitrile examination gloves, sizing is consistent with industry standards to ensure a reliable fit.
Powder-Free vs. Powdered: Which Is Better?
Powder-Free Nitrile Gloves
These are the recommended choice for virtually all applications. Without cornstarch powder, there is no risk of powder-related contamination in medical settings, no interference with wound healing, and no risk of powder inhalation. Modern manufacturing techniques (chlorination or polymer coating) make powder-free nitrile gloves easy to don even with damp hands.
Powdered Gloves
Powdered gloves use cornstarch to absorb moisture and ease donning. However, Health Canada and other North American health authorities have raised concerns about powder associated with surgical complications and allergic reactions. Most medical facilities have moved to powder-free protocols. For these reasons, powder-free nitrile is the superior and safer option.
Quality Certifications to Look For
When purchasing nitrile gloves in Canada, look for these important certifications and standards:
- ASTM D6319: The standard specification for nitrile examination gloves used in medical settings, covering tensile strength, elongation, and barrier integrity.
- ASTM F1671 / F1670: Tests for resistance to bloodborne pathogens and viral penetration — critical for medical applications.
- Health Canada Medical Device License: Required for gloves sold as Class I or Class II medical devices in Canada.
- FDA 510(k) Clearance: For gloves marketed in the United States, indicating substantial equivalence to legally marketed predicate devices.
- CE Marking (EN 455): European standard for medical gloves, often accepted alongside North American certifications.
The Health Canada medical glove standards page provides official guidance on regulatory requirements for medical gloves sold in Canada.
Color Coding and Its Purpose
While blue is the classic color associated with nitrile gloves, gloves are available in several colors for specific purposes:
- Blue: Standard medical color — immediately identifies the gloves as latex-free synthetic material.
- Black: Popular in automotive and industrial settings, providing a professional appearance that hides grease and dirt.
- White: Used in food service and certain laboratory settings.
- Purple, Green, Orange: Often used for size coding in healthcare facilities to help staff quickly identify the correct size.
Making Your Selection
By considering these factors — thickness matched to your risk level, proper sizing for comfort and protection, powder-free construction for safety, and verified quality certifications — you can confidently select the right nitrile gloves for your Canadian medical facility, industrial operation, or home use.
For reliable, medical-grade hand protection, CliniEco Medical's powder-free nitrile examination gloves meet North American quality standards and are available to ship across Canada.
Related Articles
- What Are Nitrile Gloves?
- Nitrile Gloves Buying Guide
- Nitrile Glove Thickness Guide
- Nitrile vs Latex vs Vinyl
- nitrile & examination gloves
- open a wholesale account for institutional pricing
Related Reading
Explore more guides in this category:
- AQL Explained: Medical Glove Quality Standards for Buyers
- EN 455 vs ASTM D6319: Exam Glove Standards Compared
- Nitrile Gloves for Canadian Food Processing: Safety Standards and Regulatory Requirements
Also read: see whether nitrile gloves are food safe in our gloves pillar guide.
Fitting glove sizes to each role? The gloves and PPE supply planner estimates monthly case counts by area so sizes are planned, not guessed.
Change the staff count or procedures per day and the clinic supply and cost planner re-runs the estimate.
Related reading
Frequently Asked Questions
How do mils convert to microns in glove specifications?
One mil is one thousandth of an inch, which is 25.4 microns. A 3.5 mil glove is therefore about 89 microns at the palm, a 4 mil glove about 102 microns, and a 6 mil glove about 152 microns. Specifications quoted in either unit describe the same film, so compare thickness in one unit only — mixing the two is how a buyer ends up comparing a 4 mil glove against a 100 micron glove and thinks they are different products.
Which thickness suits routine examinations and which suits cleanup?
Routine examinations and short procedures work at 3 to 5 mil (76 to 127 microns), where tactile sensitivity still matters. Cleaning, instrument handling and mechanical work call for 6 to 8 mil (152 to 203 microns and up), where puncture and abrasion resistance outweighs feel. A clinic that does both keeps each on the shelf rather than forcing one film to cover every task. CliniEco Medical stocks 3.5 mil blue nitrile and 6 mil heavy-duty black nitrile for exactly that split.
How do I pick the right glove size without trying every box?
Measure the dominant hand's palm width across the knuckles and palm length from wrist crease to middle fingertip, then match both to the supplier's size chart — guessing "medium" is the usual cause of returns. A correctly sized glove seats at the web between thumb and index finger without pulling taut, and the cuff sits at the wrist without rolling. A glove that stretches white across the palm is one size too small and will tear at the cuff during removal.
Powder-free or powdered — and does it affect certification?
Powder-free is the working standard for clinics, laboratories and food facilities: no cornstarch residue on instruments, wounds or samples, and no aerosol in a laminar-flow hood. Powdered gloves persist in some non-medical handling tasks where damp hands make donning difficult. Ask for the test report behind the claim — medical-grade nitrile should be documented to ASTM D6319, with chemotherapy-rated gloves tested to ASTM D6978. CliniEco Medical supplies 4.0 mil chemo-grade powder-free nitrile, 4.5 mil fully textured nitrile and 3.2 mil transform nitrile by the case.
