How Many Biological Indicators Does a Diagnostic Laboratory in Ontario Use per Month at Eight Loads a Day?
A diagnostic laboratory in Ontario counts biological indicators differently from a dental office, and the difference is not volume. It is the unit. An office tests a sterilizer on the days it is used. A laboratory releases a load, and a load is not a day: eight loads in a working day are eight separate decisions about whether instruments or media can go back into service.
The vial carrying that decision is the 24-hour self-contained biological indicator, 25 tests to a pack. A self-contained vial holds the spore strip and the medium together, which removes the transfer step where operator variation creeps in. Loads are packed in Class 4 self-sealing pouches or trays before they go in.
How many biological indicators does a diagnostic laboratory use in a month?
Multiply loads by working days. A community laboratory running eight loads a day across 21 working days runs 168 loads a month; at one indicator per load that is 168 indicators, or 1,680 a year. A hospital lab at sixteen loads a day needs double.
The table shows how fast the box count moves with run volume, and why an office rule of thumb does not transfer.

| Loads a day | Loads a month | Indicators a month | 25-pack boxes a month | Boxes a year |
|---|---|---|---|---|
| 4 | 84 | 84 | 4 | 40 |
| 8 | 168 | 168 | 7 | 80 |
| 16 | 336 | 336 | 14 | 160 |
Why does the count track loads rather than days?
Because the loads are not interchangeable. A laboratory sterilizes glassware, instruments, liquid media and waste, and those differ in density, packaging and cycle type. A single daily indicator would certify one of them and leave the rest released on chemical evidence alone. CSA Z314:23 treats biological monitoring as part of the release decision, so a facility with mixed loads writes its procedure around the load, not the calendar.
The same phrase, per month, means two very different numbers in one building: 21 for the office upstairs, 168 for the laboratory downstairs.

Does the old laboratories regulation still apply?
No, and that matters before a purchase order cites it. R.R.O. 1990, Regulation 682, Laboratories, was revoked on July 1, 2022 under O. Reg. 45/22, so laboratory quality requirements now come from ISO 15189:2022 and from the reprocessing standard rather than from a provincial laboratories regulation. A supplier document that still cites Regulation 682 is describing a framework that ended four years ago.
How should a laboratory set the order?
From the run sheet, then against the box. A laboratory that knows its loads per day and tests per load has the annual figure already; the order is that figure divided by 25, delivered in instalments rather than one drop, because 160 boxes will not fit on a shelf. The 100-test pack suits the high-volume bench better than stacking 25-packs four deep.
Running a diagnostic laboratory? See our laboratory consumables and sterilization supplies.
Ordering for a clinic, lab or care home? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.
References
- Ontario Regulation 682, Laboratories, revoked July 1, 2022 by O. Reg. 45/22 (checked 16 November 2026)
- CSA Z314:23, Canadian medical device reprocessing in all health care settings (checked 16 November 2026)
- ISO 15189:2022, Medical laboratories, requirements for quality and competence (checked 16 November 2026)
- ISO 11138-1:2017, Sterilization of health care products, biological indicators (checked 16 November 2026)
Printable companion: the compliance log center carries the load log that ties a biological result to one specific load, which is the record an assessment asks for when it wants evidence that a released load had its own result.
Building the monthly figure from the run sheet rather than last year's invoice? The clinic supply planner keeps loads per day and tests per load in separate fields, so a change in run volume shows up before the box runs out.
Not sure how this applies to your own setup? Ask a sterilization compliance specialist — you’ll get a written answer specific to your equipment and province, with the regulation or standard cited.
Related Reading
- 24-Hour Self-Contained Biological Indicators: Pack Sizes, Incubation and the Record
- Positive Biological Indicator Investigations: A Six-Step Protocol With Canadian Documentation Duties
Frequently Asked Questions
How many indicators does a 24-well incubator hold?
Twenty-four wells hold one day of testing at eight loads a day with room for controls, but not three days of eight. That decides when a second incubator is needed.
Does Ontario Regulation 682 still govern laboratory practice?
No. Regulation 682, Laboratories, was revoked on July 1, 2022 under O. Reg. 45/22, so requirements now come from ISO 15189 and the reprocessing standard.
Should a laboratory test every load or once a day?
The written procedure sets it. The standard requires each released load to rest on defined evidence, and a laboratory running glassware, instruments and liquid media usually monitors each load.
How many biological indicators does a diagnostic lab use in a month?
It follows the load count. A laboratory running eight loads a day across 21 working days runs 168 loads, and testing each load uses 168 indicators, just under seven 25-pack boxes.
Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).