What Does a Canadian Workplace First Aid Kit Need, and How Often Is It Restocked?

A white cylindrical tub of hydrogen peroxide disinfectant wipes with a light blue lid and a bilingual Canadian label showing a drug identification number and 160 wipes

A Canadian workplace first aid kit needs the contents its province prescribes, inspected on the interval its province sets. In Ontario that means a first aid box whose contents are set by worker count under the first aid requirements regulation — twelve adhesive dressings for a workplace of five or fewer, forty-eight for a workplace of more than fifteen — and an inspection recorded not less than quarter-yearly, signed on the inspection card by the person who did it. That inspection interval, not the contents list, is the part most employers miss, and a box stocked with elastic bandage wrap and dressings that are never dated is the usual evidence of it.

The national picture is moving. CSA Z1220 sets a classification for workplace first aid kits, and the federal government has published proposed regulations that would replace the contents schedules in five occupational health and safety regulations with an incorporation by reference to that standard. Until those come into force in a given jurisdiction, the provincial schedule is what an inspector checks.

Quick facts

  • Ontario's first aid regulation sets contents by the number of workers per shift: up to five, more than five and up to fifteen, more than fifteen and fewer than 200, and 200 or more.
  • The same regulation requires employers to inspect first aid boxes and their contents at not less than quarter-yearly intervals and mark the inspection card with the date and signature.
  • A first aid station must carry the inspection card beside the certificates of the trained workers on duty, so the inspection is visible without opening the box.
  • CSA Z1220 classifies kits as Type 1 personal, Type 2 basic in small, medium and large, and Type 3 intermediate, with the size tied to the number of workers per shift.
  • The United States works from a different instrument: ANSI/ISEA Z308.1-2021 classifies kits as Class A or Class B, and the federal occupational rule requires only that adequate first aid supplies be readily available.
  • The federal proposal published in the Canada Gazette on 3 October 2026 would incorporate CSA Z1220 by reference across five regulations, fulfilling the last commitment under the 2019 harmonisation agreement.

What has to be in the box in Ontario?

The contents are prescribed by worker count, and the regulation lists them item by item.

Worker count per shift Prescribed contents in the box
Up to 5 Current St John Ambulance first aid manual, 1 card of safety pins, 12 adhesive dressings, 4 sterile gauze pads 3 inches square, 2 rolls of 2-inch gauze bandage, 2 field dressings 4 inches square or 2 sterile bandage compresses, 1 triangular bandage
More than 5, up to 15 Manual, 1 card of safety pins, 24 adhesive dressings, 12 sterile gauze pads 3 inches square, 4 rolls of 2-inch gauze bandage, 4 rolls of 4-inch gauze bandage, 4 sterile surgical pads for pressure dressings, 6 triangular bandages, 2 rolls of splint padding, 1 roll-up splint
More than 15, fewer than 200 Stretcher, 2 blankets, 24 safety pins, 1 basin, 48 adhesive dressings, 2 rolls of 1-inch adhesive tape, 12 rolls of 1-inch gauze bandage, 48 sterile gauze pads 3 inches square, 8 rolls of 2-inch gauze bandage, 8 rolls of 4-inch gauze bandage, 6 sterile surgical pads, 12 triangular bandages, splints of assorted sizes, 2 rolls of splint padding
200 or more A first aid room staffed by a registered nurse or a qualified worker, with instruments, dressings, a steriliser, a couch and a first aid box meeting the 5-to-15 schedule for use at the scene

The regulation also says the box has to be large enough that each item is in plain view and easily accessible, and that all items must be maintained in good condition at all times. That sentence is what makes an expired dressing a finding rather than a nuisance.

A white cylindrical tub of hydrogen peroxide disinfectant wipes with a light blue lid and a bilingual Canadian label showing a drug identification number and 160 wipes
Restocking is a date-driven task: the items that expire are the ones that disappear from the box quietly, and the inspection card is what makes the gap visible.

How often does the kit need to be inspected and restocked?

Ontario sets the interval at not less than quarter-yearly, and the record has to be on the card.

The difference between "restocked when empty" and "inspected quarterly" is the difference between a box and a programme. A quarterly inspection catches the items that expire, the items that were taken and not replaced, and the items that were never in the box because the last order substituted a different size. Restocking fills a gap; inspection finds it.

Event What happens Record
Quarterly inspection Every item checked against the schedule, expired items removed Date and signature on the inspection card
Use of the kit Item replaced before the box is returned to the wall First aid record of the treatment given
Change in worker count Box contents move to the new schedule Revised inventory sheet
Change of premises or process Hazard assessment repeated, kit type reconsidered Assessment record

The third row is the one that catches growing employers. A box stocked for five workers is compliant on the day it is bought and non-compliant the month the sixth worker starts, and the fix is not a bigger box but the schedule for the next band.

A black nitrile examination glove held in a thumbs-up gesture against a plain white background
Gloves in a workplace kit are part of the dressing task, not a separate line: the provincial schedules put them in the box only where the workplace's hazard assessment calls for them.

How does CSA Z1220 change the picture?

It replaces a contents list with a classification, and it is being adopted by regulation.

CSA Z1220 was first published in 2017 and reaffirmed in 2021, with a second edition in 2024. It classifies kits as Type 1 personal, Type 2 basic and Type 3 intermediate, and sizes the basic and intermediate kits as small, medium or large according to the number of workers per shift. Type 1 is the kit an organisation provides to a worker who works in isolation or who does not otherwise have access to a workplace kit.

The federal proposal published on 3 October 2026 would replace the first aid kit contents schedules in five occupational health and safety regulations with an incorporation by reference to CSA Z1220, as amended from time to time. The regulatory impact analysis describes the change as fulfilling the last outstanding requirement of the 2019 harmonisation agreement, and estimates the total cost at 4.8 million dollars in present value over ten years. Nothing in that proposal changes a provincial schedule; each province updates its own regulation on its own timetable.

How does the approach in Canada compare with the United States?

The instruments are different in kind, which is why a kit bought on one side of the border does not automatically satisfy the other.

Question Canada United States
What sets the contents Provincial regulation, with a national standard being incorporated by reference ANSI/ISEA Z308.1-2021, a voluntary consensus standard, plus the federal occupational rule
What the federal rule requires Provincial schedules; the federal proposal would incorporate CSA Z1220 Adequate first aid supplies readily available under 29 CFR 1910.151(b)
Classification of kits Type 1, 2 and 3, with sizes by workers per shift Class A and Class B, by hazard level and number of users
Inspection interval Prescribed in some provinces; Ontario requires not less than quarter-yearly Not prescribed by the federal rule; the consensus standard sets a practice, and enforcement attaches to the adequacy of supplies
Record of inspection Inspection card marked with date and signature in Ontario No equivalent card requirement in the federal rule

The inspection row is the practical difference for a facility manager running sites in both countries. In Ontario, the signed card is the evidence. In the United States, the evidence is the condition of the supplies at the moment of an inspection, and the consensus standard's guidance on checking contents is a practice rather than a citable interval.

What should a restock order include?

Four things, and the fourth is what makes the next inspection shorter.

Order field Why it matters
Kit type and size, or the provincial worker band Determines the contents schedule that applies
Item-level quantities per the schedule Prevents substitution by pack size
Expiry date at receipt Lets the quarterly inspection work from a date list
Replacement part numbers for the box and the card Keeps the container and the record in the same system

Two of the items in a restock order are frequently substituted because they look interchangeable: the dressing that goes into the box and the elastic bandage wrap that goes into the larger schedules. They are not, and a substitution by pack size is how a box ends up with the right number of the wrong item. The 2021 changes to the American consensus standard are a useful reminder that contents lists move: that revision made a foil blanket mandatory and added specificity to tourniquets, which is the direction the Canadian standard has also taken.

A restock order written as "first aid refill" produces whatever the supplier has. A restock order written against the schedule produces a box that can be checked in five minutes, which is the difference between a quarterly inspection that happens and one that gets postponed.

Is the inspection interval different between Canada and the United States?

Yes, and this is the clearest difference in the whole comparison. Ontario requires first aid boxes and their contents to be inspected at intervals of not less than three months, with the date and signature recorded on an inspection card that sits with the box. The federal American rule requires adequate supplies to be readily available under 29 CFR 1910.151(b) but sets no inspection interval, and the consensus standard's check guidance is a practice rather than a citable requirement. An employer running sites in both countries should therefore run the Canadian cycle everywhere and treat the American site as the one where the record is optional and the condition of the supplies is the evidence.

Related reading

Frequently Asked Questions

How often must a first aid box be inspected in Ontario?

At intervals of not less than three months, with the date and the signature of the person who inspected it marked on the inspection card.

Does Ontario accept a CSA Z1220 kit instead of the prescribed contents?

The regulation prescribes contents by worker count. Where an employer is considering a CSA Z1220 kit, the question to put to its health and safety adviser is whether the provincial regulator has adopted the standard; Ontario's schedule remains the instrument an inspector checks.

What is the difference between a Type 2 and a Type 3 kit?

A Type 3 intermediate kit contains the items in a Type 2 basic kit plus additional items for workplaces with a higher risk of first aid events. A Type 2 kit is intended for low-risk workplaces.

What is the difference between Class A and Class B in the United States?

Class A covers the common injuries in most workplaces. Class B contains the Class A items in greater quantities plus a splint and a tourniquet, and is intended for more complex or higher-hazard environments.

Do gloves belong in a workplace first aid kit?

They belong where the workplace's hazard assessment calls for them, and the provincial schedules and the consensus standards both allow the kit to be supplemented beyond the minimum. What matters is that the supplement is recorded, so the quarterly inspection checks the same list twice.

How long do the dressings last?

Adhesive dressings and sterile pads carry a manufacturer's date, and the inspection is where expired stock is removed. A kit that has not been opened in a year is the kit most likely to contain expired items.

Is a workplace kit the same as a clinic's emergency kit?

No. A workplace kit is built for injuries to workers and is regulated by occupational health and safety law. A clinic's emergency kit is built around the procedures the clinic performs and is governed by its professional college and its own policy.

Restock against the schedule, not the shelf

The compliance log centre carries printable inspection and inventory sheets that match a quarterly cycle, and the log generator builds a kit record with the fields an inspector asks for. Where a workplace's first aid programme or its clinic-adjacent supplies need to be checked against provincial expectations, the compliance consultation desk is the route; institutional accounts and standing orders are handled through the account enquiry page. Reselling? become a distributor.

CliniEco Medical distributes first aid and clinic consumables in Canada under MDEL #35334. This page summarises requirements published by the Government of Ontario, CSA Group, the Canada Gazette and the Occupational Safety and Health Administration, checked on 11 November 2026; the requirement that binds a specific workplace is the one in its provincial regulation and its own written programme.

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.