Which Sterile Petri Dish 100 × 15 mm Do Research Laboratories in Nova Scotia Order? Sizes and Case Formats

Product diagram, not a photograph: pack contents of a 500-dish case

Which Sterile Petri Dish 100 × 15 mm Do Research Laboratories in Nova Scotia Order? Sizes and Case Formats

Which 100 × 15 mm petri dish do research laboratories in Nova Scotia order?

A research group specifies plates at the same time as it specifies medium, because the two numbers on the plate decide what the assay can report. What university, teaching-hospital and contract-research benches in Nova Scotia standardise on is the 100 × 15 mm polystyrene plate: wide enough for an enumerable spread plate, shallow enough to keep a colony visible under the lid. CliniEco lists sterile petri dishes, 100 × 15 mm polystyrene, 320 per case, and a research buyer really negotiates two variables: the format, and how the case is packed.

What do the numbers 100 mm and 15 mm decide?

Diameter is the agar area, and agar area is the countable window. A 100 mm plate presents roughly 78 cm², so a 20 to 25 mL pour settles at about 2.5 to 3 mm — shallow enough that a colony is not buried, deep enough that the pour does not pull away from the wall during a two-day incubation.

Height is a storage and stacking figure. At 15 mm, the lid clears the agar, condensation can be lifted away without dragging across the surface, and the stack height that a shelf can accept is fixed before the incubator is bought rather than after.

Which plate size should a research group standardise on?

Three formats cover most research work, and the arithmetic explains why the 100 mm plate is the default for enumeration.

Product diagram, not a photograph: 100 × 15 mm dish with diameter and height callouts

Format Agar surface 20 to 25 mL settles at Typical research use
60 mm about 28 cm² 7 to 9 mm Antimicrobial screening, small-volume work
90 mm about 63 cm² 3.4 to 4 mm Routine work where shelf space is at a premium
100 mm about 78 cm² 2.5 to 3 mm Enumeration, environmental and surface sampling

Moving from 90 mm to 100 mm adds about a quarter more agar area for the same pour. On a method with a defined countable window that headroom is what decides whether a plate can be read or has to be repeated, which is the reason the wider format survives in labs that could otherwise save shelf space.

How are the cases packed, and which packing suits a research store?

The 320-plate case is the working unit for a research bench: a term's worth for a small group, without the storage problem of a pallet. Above that, the choices describe purchasing rather than manufacturing — one case, a standing order across several cases, or a pallet held for a shared facility.

Inside the case, ask specifically whether plates are sleeve-packed or loose in a bag. Sleeves let a bench open one bundle at a time and leave the rest covered while the pour runs. A single bag cuts the per-plate price and exposes every plate each time it is opened, which matters on a busy bench where a pour takes twenty minutes.

How many cases does a research group need for a term?

Product diagram, not a photograph: pack contents of a 320-dish case

Work it from the protocol, not from the calendar. A teaching section that pours 150 plates a week for twelve weeks needs 1,800 plates, so six cases covers the term and a seventh sits as the buffer for a repeat run. A contract lab running three projects in parallel should total the plates per project before ordering, because a shared case runs out fastest in the week two projects report together.

What changes when the shipment reaches Nova Scotia in winter?

Polystyrene is brittle in the cold, and a case that has spent an hour on a frozen dock can split along the rim with nothing visible until agar runs onto a shelf. Between December and March, ask for inside delivery or a heated receiving bay, and open one case from each pallet before the delivery is signed off rather than after it is stored.

The transport side of the same work usually travels on the same purchase order, which is why laboratories add UN3373 specimen transport bags, 8 × 10 inch, 95 kPa and 3-wall leak-resistant specimen bags, 6 × 9 inch to the plate order.

Where does a Nova Scotia research account get set up?

Wholesale and multi-site ordering covers case pricing and purchase-order billing, and the B2B wholesale collection lists the lines stocked for institutional buyers. Reselling? become a distributor.

Running a research or diagnostic laboratory? Laboratory supplies for diagnostic labs collects the plates, transport bags and bench consumables in one place.

Download the printable laboratory SOP template for the plating bench so pour volume and incubation conditions are written down with the method, and turn a weekly plate count into a case order with the supply planner.

References

  1. ISO 15189:2022 — medical laboratories, requirements for quality and competence (checked 18 October 2026)
  2. ISO 11133:2014 — culture media preparation, production and performance testing (checked 18 October 2026)
  3. WHO Laboratory Biosafety Manual, 4th edition (checked 18 October 2026)

Related Reading

Frequently Asked Questions

Which petri dish do research laboratories in Nova Scotia order?

The 100 × 15 mm polystyrene dish, sterile and single use, in a 320-dish case. It offers about 78 cm² of agar area, which keeps an enumeration plate inside the 30 to 300 colony window without disturbing a method written around that range.

How does a 100 mm dish differ from a 90 mm dish?

Roughly a quarter more agar area — some 78 cm² against 63 cm² — so the same 20 to 25 mL of medium settles at a lower depth. A method written for one format has to be re-checked before it is run on the other.

What case formats should a Nova Scotia laboratory ask about?

Single 320-dish cases, multi-case standing orders and pallet quantities, plus whether the case is sleeve-packed or bagged. Sleeves keep unopened dishes dust-free on the bench; a bulk bag costs less per dish and is slower to work from.

How should a winter delivery to Halifax be handled?

Polystyrene turns brittle in the cold, and a case dropped on a frozen dock cracks along the rim. Ask for inside delivery or a heated receiving area between December and March, and inspect one dish per case before signing.

Last updated: October 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.