Endodontic files and paper points arrive in the same order and answer to different documents. Files are governed by a general instrument standard that sets requirements and test methods, and they are almost always supplied for single use. Paper points have their own standard, which is unusually explicit about packaging and labelling, and which allows the same product to be sold sterile or non-sterile. A practice that files both under one heading will end up applying the file rules to the points and missing the one clause that matters most on an endodontic tray.
The reason the distinction is worth an hour of a practice manager's time is that it decides what can be documented. A file has no reprocessing route, so its evidence is the label and the discard rule. A point has a sterile claim that the standard explicitly leaves to the manufacturer, so its evidence is the packaging and the expiry date. Both end up on the same tray under the same pouch, and the pouch is the only artefact that ties the tray to a cycle: our Class 4 self-sealing sterilization pouch with dual indicators is the packaging side of that record.
Which standard applies to the file, and what does it actually fix?
ISO 3630-1:2019 sets general requirements and test methods for endodontic instruments. It is a general part: it defines what the instrument has to be and how it is tested, not which sequence a clinician should use. That boundary matters, because suppliers sometimes present conformance as if it validated the treatment approach, and it does not.
| Document | What it fixes | What the practice still has to decide |
|---|---|---|
| ISO 3630-1:2019, endodontic instruments, general requirements and test methods | Requirements and test methods for endodontic instruments | Which system, taper and sequence the practice uses |
| ISO 7551:2023, endodontic absorbent points | Requirements and test methods for sterilized absorbent points, including size designation and colour coding | Whether the practice buys sterile or non-sterile points, and how opened stock is stored |
| ISO 17664-1:2021, processing information from the manufacturer | What the manufacturer must tell the user about processing critical and semi-critical devices | Whether the office follows it, and where it is recorded |
| ISO 7153-1:2016, metallic materials, stainless steel | Steel grades where a hand file is claimed as stainless | Nothing clinical; it is a specification check |
Files are the simpler half of the file because the answer is short. A rotary or hand file supplied for single use has no validated reprocessing instruction, so the practice does not need a cleaning step for it; it needs a discard rule, a record of which file was used on which canal, and a way to keep used files out of the tray. The confusion arrives when a practice treats a file as reusable because it looks like an instrument. It is not, and the label is what says so.


What does the paper point standard say that the file standard does not?
ISO 7551:2023 is unusually specific, and three of its provisions change how a practice should read a box. First, absorbent points may be marketed as sterilized or non-sterilized, and the requirements of the standard apply to points sterilized once in a manner approved by the manufacturer. Second, the standard specifies size designation and a colour-coding system for sizes, which means a colour on a point is a size declaration rather than a brand flourish. Third, clause 7 specifies labelling and packaging requirements including instructions for use.
There is a fourth provision that is easy to misread. The standard states that a claim by the manufacturer that the contents of the unopened pack are sterile is the responsibility of the manufacturer, and that the document does not specify requirements or test methods for sterility. In plain terms: the sterile claim is a statement the manufacturer makes, not a result the standard certifies. A practice that records the expiry date and keeps the unopened pack intact is doing the right thing; a practice that treats the word sterile as an independent test result is reading more into the box than the box contains.
| Claim on the box | What it means under ISO 7551:2023 | What an Ontario practice should record |
|---|---|---|
| Sterile, with an expiry date | A manufacturer claim about the unopened pack, made in a manner the manufacturer approved | Lot, expiry, and the date the pack was opened |
| Non-sterile | A lawful marketing option; the standard covers points sterilized once where that route is used | The processing step the office applies, if any, and who validated it |
| Size by colour and number | A declared size designation under the standard's colour-coding system | Size consistency across brands, because the colour is a declaration and not a measurement |
| Quantity and packaging type | Part of the clause 7 labelling content | Whether an opened pack can be kept, and for how long |
What must the label state before either product is used?
Section 21(1) of the Medical Devices Regulations applies to both. The label must set out the name of the device, the manufacturer's name and address, the device identifier, an indication of package contents where those are not obvious, the word sterile where a sterile claim is made, an expiry date where one exists, the intended use, the directions for use and any special storage conditions. Section 21(2) requires the information to be legible, permanent and prominent, and section 23(1) permits English or French for devices sold to professionals.
The field that carries the most weight in this family is the one practices skip: directions for use. For a file, the directions are the discard rule and the torque or speed limit. For a point, they are the storage statement and the single-use statement. Neither is a suggestion; in Ontario both sit under the College's expectation that dentists follow the College standard, public health guidelines and the recommendations of manufacturers of sterilization and other dental office equipment.
Where does the Ontario layer sit?
The Royal College of Dental Surgeons of Ontario publishes its infection prevention and control standard with a self-audit review form and an indicator flowchart, and states that the standard is aligned with Public Health Ontario, the Public Health Agency of Canada and the Provincial Infectious Diseases Advisory Committee. Public Health Ontario's checklist for dental practice and its reprocessing guidance are what a public health unit works from.
Nothing in that layer overrides the federal label, and nothing in the federal label tells a practice how to run an endodontic tray. The Ontario layer fills the gap by making the manufacturer's instructions binding on conduct. That is why a practice can be asked for the leaflet for a specific file system, and why a file with no leaflet is a finding even when the instrument is well made.
How should the endodontic tray be documented?
Three records, kept together. The first is the product record: label photograph and leaflet for each file system and each point pack, with the lot and expiry. The second is the use record: which file went into which canal and when it was discarded, because a single-use item with no discard record is indistinguishable from a reused one. The third is the load record: the pouch, the indicator and the tape that show the tray went through a cycle, where a steam indicator tape and a written cycle log give the reviewer something to compare.
Two reference pages cover the practical questions that follow: what an auditor checks about files and points and cleaning and sterilizing between patients. Between them they answer the question this page deliberately does not: what the office should do, as opposed to what the document requires.
Where does a practice take this next?
Three things to act on rather than read: the printable compliance log sheet that records receiving dates, lot numbers and open-on dates for point packs and file boxes and exports from the browser; the clinic supply planner that turns daily bench counts into cases per month; and, where a sterile claim or a discard rule has to be settled in writing, Ask your compliance question which cites the regulation or standard it rests on.
Facility and multi-site buyers can Wholesale and multi-site ordering for case pricing and account setup. Reselling? become a distributor.
Related reading
- Which endodontic files and paper points an Ontario clinic should buy
- What an infection control auditor checks about files and paper points
- How to clean and sterilize files and paper points between patients
Frequently Asked Questions
Which standard covers endodontic files?
ISO 3630-1:2019 sets general requirements and test methods for endodontic instruments. It defines what the instrument must be and how it is tested; it does not endorse a clinical sequence or a file system.
Which standard covers paper points?
ISO 7551:2023 sets requirements and test methods for sterilized absorbent points, specifies size designation and a colour-coding system, and in clause 7 specifies labelling and packaging requirements including instructions for use.
Does ISO 7551 certify that paper points are sterile?
No. The standard states that a manufacturer's claim that the contents of the unopened pack are sterile is the manufacturer's responsibility, and that the document does not specify requirements or test methods for sterility. The claim is a manufacturer statement, not a test result the standard provides.
Can endodontic files be reprocessed in Ontario?
A file supplied for single use has no validated reprocessing instruction, so reprocessing it would leave the practice without a document to point to. The defensible route is a written discard rule, a use record per canal and segregation of used files from the tray.
What must the label state for a box of files?
Under section 21(1) of the Medical Devices Regulations: the device name, the manufacturer's name and address, the device identifier, an indication of package contents where not obvious, the word sterile where claimed, an expiry date where one exists, the intended use, the directions for use and any special storage conditions, all legible, permanent and prominent under section 21(2).
Do colour-coded paper points mean anything regulatory?
They are a size declaration. ISO 7551:2023 specifies a colour-coding system for designating sizes, so the colour is a declared size under the standard rather than a measurement the practice can assume matches another brand exactly.
What is the gap most often found in an Ontario endodontic file?
No leaflet for the specific file system, and no discard record. The label is usually present because it is on the box; the instruction sheet and the use record are the two items that go missing.
Sources
- ISO 3630-1:2019, endodontic instruments, general requirements — boutique.afnor.org - ISO 7551:2023, endodontic absorbent points — evs.ee - ISO 17664-1:2021, processing information from the manufacturer — accessdata.fda.gov - ISO 7153-1:2016, metallic materials, stainless steel — evs.ee - Medical Devices Regulations, SOR/98-282, sections 21 to 23 — laws-lois.justice.gc.ca - RCDSO, infection prevention and control standard and advisories — rcdso.org - RCDSO, IPAC self-audit review form — cdn.agilitycms.com - RCDSO, how to use chemical and biological indicators — cdn.agilitycms.com - Public Health Ontario, IPAC checklist for dental practice — publichealthontario.ca - Public Health Ontario, reprocessing steps — publichealthontario.caCliniEco Medical distributes clinic consumables in Canada under Health Canada MDEL #35334. Requirements that bind a particular practice remain the ones in its own written procedures and in the provincial rules that govern where it operates.
Last updated: 20 November 2026.