Which single-use sensors does a Canadian sleep laboratory use per study?

Pair of blue nitrile examination gloves laid flat on a white background

Which single-use sensors does a Canadian sleep laboratory use per study?

A sleep study runs eight hours and twenty-odd channels, and almost every disposable in the room is committed in the first fifteen minutes, when the technologist preps the patient and applies sensors. The purchasing question is not which sensor is available but which channels are replaced per study and which are cleaned between patients.

Which channels use a single-use sensor?

Channels split cleanly into those that touch mucous membrane or broken skin, which cannot be reprocessed, and those that sit on intact skin and can be cleaned to a validated level.

Channel Sensor Replaced each study Why
Nasal airflow pressure cannula yes sits at the nostril, contacts secretions
Nasal and oral airflow thermistor yes same contact, and the element degrades
Respiratory effort piezo or RIP belts no worn over clothing, cleaned between patients
Blood oxygen finger probe depends on format disposable wrap probes are single use
EEG, EOG, EMG cup or gel electrodes depends on format single-use cups yes, gold cups cleaned and reused
Body position sensor in the belt or on the chest no no patient contact

The two rows that decide most of the spend are the electrodes and the probe, because both exist in reusable and single-use formats and the choice is a lab policy decision rather than a product limitation.

How many disposables does a four-bed lab use in a month?

Six rolls of paper medical tape arranged on a white reflective surface

Assume twenty-five studies per bed per month, which is a realistic figure for a lab running six nights a week.

Item Per study Four beds, 100 studies
Nasal pressure cannula 1 100
Thermistor 1 100
Disposable oximeter probe 1 100
Single-use cup electrodes 4-8 400-800
Paper tape, 1 inch about a metre 3-4 rolls
Prep pads and gauze 4-6 400-600

Order the electrode line against the montage the lab actually runs. A full 10-20 montage with single-use cups consumes roughly double a limited montage, and the difference shows up as a stock-out in month two rather than in week one.

Which standard applies to the oximeter probe?

The pulse oximeter is covered by ISO 80601-2-61, and the edition question is worth asking: the 2017 edition reached the withdrawal stage on 10 April 2026. A datasheet, a tender or a specification that still cites the 2017 text is pointing at a superseded edition, and the sensible request is to ask which edition the device is actually tested against.

Pair of blue nitrile examination gloves laid flat on a white background

For sensor labelling, ISO 15223-1:2021 is the reference for the symbols that appear on the pack. The do-not-reuse symbol, a numeral two struck through, is the manufacturer's statement that the device is single use. It is a stronger statement than any claim in marketing copy, and it is the one an accreditation reviewer looks for when asking why a nasal cannula was not cleaned and re-used.

Which items can a lab reprocess?

Reusable gold-cup electrodes, belts and the position sensor are cleaned between patients; the cleaning has to be written down, and the practice should match the method to the device rather than to the room. A sensor that contacts intact skin is a lower-risk item than one that contacts mucous membrane, and a cannula in the second category cannot be reprocessed at all.

That distinction is also the one that catches out a lab expanding from four beds to six: the reusable set doubles, but the single-use lines double with the study count, and the second is the line that runs out first.

What does the lab stock, and what does it order in?

The cannula, thermistor and probe are order-in lines, and this supplier does not stock polysomnography sensors. What it does stock are the consumables that surround the montage: hypoallergenic paper tape, 1 inch by 10 yards for securing leads without pulling at skin, nitrile examination gloves, 1,000 per case for application and cleanup, and 70% isopropyl alcohol prep pads, 200 per box for skin prep before an electrode goes on.

Splitting the reorder that way keeps the sensor line tied to study volume and the consumable line tied to technologist shifts, which is the figure that actually varies week to week.

Sleep and diagnostic rooms have different stock patterns, and the diagnostic laboratory supply page groups the consumable lines by room type.

Ordering for a laboratory or a multi-site group? Wholesale and multi-site ordering covers case pricing and account setup, and the B2B wholesale collection lists the lines held for institutional buyers. Reselling? become a distributor.

References

  1. ISO 80601-2-61:2017 — Particular requirements for basic safety and essential performance of pulse oximeter equipment (checked 7 November 2026)
  2. ISO 15223-1:2021 — Symbols to be used with information supplied by the manufacturer, Part 1: General requirements (checked 7 November 2026)

Printable companion: the free log and checklist library includes a consumable-use sheet that a laboratory can print and keep with its per-study records.

Turning studies into orders? The clinic supply and cost planner converts a monthly study count into sensor and consumable quantities.

Not sure how this applies to your own setup? Ask a sterilization compliance specialist — you’ll get a written answer specific to your equipment and province, with the regulation or standard cited.

Related Reading

Frequently Asked Questions

Which sensors in a sleep study are single use?

The ones that touch mucous membrane or cannot be cleaned to a validated level: the nasal pressure cannula, the thermistor, the disposable oximeter probe where the lab uses one, and any single-use EEG cup electrode. Belts, reusable gold-cup electrodes and the position sensor are reused between studies.

How many disposables does one overnight study use?

Typically one nasal cannula, one thermistor, one probe, four to eight single-use electrodes and a metre or so of tape, plus prep pads and gauze. A split-night study that moves to titration uses the same set for the second half.

Is the 2017 edition of the oximeter standard still current?

No. ISO 80601-2-61:2017 reached the withdrawal stage on 10 April 2026, so a datasheet or tender that still cites the 2017 edition is citing a superseded text and should be asked which edition it is actually tested against.

How can a lab tell a single-use sensor from a reusable one?

By the symbol on the label, not by the marketing copy. A device marked with the do-not-reuse symbol under ISO 15223-1 is single use for that patient, and reprocessing it removes the manufacturer's performance claim.

Last updated: November 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).

Vous travaillez déjà avec des cliniques ? Devenez représentant régional.