CliniEco sources its examination-grade nitrile gloves from INTCO, a large glove manufacturer, and brings them into Canada in wholesale cases rather than single boxes. The point of that structure is simple: clinics get a consistent resin, a published AQL, and a case price that reflects the volume they actually use. This page explains where the gloves come from, what the quality numbers on the box mean, and how to compare an examination glove with a heavier-duty option.
Where do CliniEco nitrile gloves come from?
They are manufactured by INTCO and supplied to Canadian clinics through CliniEco, which began operating in October 2023 as the brand of Ecology Source Co. Ltd. The examination-grade value line is sold as the Touch Flex / AdvanceCare case, ten boxes of 100 gloves. Because the same factory runs the resin and the forming lines, the gloves you reorder in six months should match the gloves you tested, which matters more than a one-off sample when a clinic standardizes on a single box.
What does AQL mean on a glove box?
AQL stands for acceptance quality limit. It is the maximum defect rate a sampling plan will accept before a production lot fails inspection. For examination gloves, an AQL of 1.5 is a common target for pinholes and a 2.5 AQL for major physical defects. A lower AQL number means tighter acceptance, so when two boxes look identical, the AQL and the standard cited on the label are what separate a general-purpose glove from a tighter examination-grade one. Ask for the AQL on the specification sheet, not just the front of the box.
How do examination-grade gloves differ from heavy-duty gloves?
| Feature | Examination-grade nitrile | Heavy-duty black nitrile |
|---|---|---|
| Thickness | Around 4 mil | Around 6 mil |
| Standard | ASTM D6319 for nitrile examination gloves | Tested for durability and tear resistance |
| Fit and feel | Tighter, higher tactile sensitivity | Roomier, built for rough handling |
| Typical use | Patient contact and clinical procedures | Cleaning, maintenance and heavy tasks |
What standards should a nitrile glove meet?
For an examination glove, look for ASTM D6319, the standard specification for nitrile examination gloves, alongside the AQL for watertightness. Tensile strength and elongation are part of the same specification, so a supplier who only quotes the material name is telling you half the story. Gloves are also regulated as medical devices, which is why a Canadian importer should be able to show a valid medical device establishment licence. CliniEco Medical holds MDEL #35334.
How do clinics compare case pricing?
Compare at the case level, not the box. A case of ten boxes of 100 is 1,000 gloves, and the number that matters is cost per glove at your monthly volume. Ask three questions: what is the per-glove cost at your reorder quantity, what is the lead time from a Canadian warehouse, and does the supplier hold stock or ship direct from overseas. A clinic that runs through two cases a month should be buying on a standing order with a fixed case price, not re-ordering single boxes at short notice.
How should a clinic store and rotate glove stock?
Nitrile gloves have a shelf life, and stock that sits in a hot utility room or on a sunny windowsill ages faster than gloves kept in a cool, dry cabinet. Store cases off the floor, keep them out of direct sunlight, and rotate first-in-first-out so the oldest box is used first. Write the received date on each case when it arrives, and check the manufacturer's expiry before a large order, because a deep discount on short-dated stock is not a saving if the boxes expire before the clinic uses them.
Which glove thickness should a clinic stock?
For everyday patient contact, the INTCO wholesale case for the Touch Flex / AdvanceCare line is the volume option, while a heavier 6 mil heavy-duty black nitrile glove, 100-pack suits cleaning and maintenance tasks. Most clinics keep both on the shelf rather than using one thickness for every job.
Clinics that want the paperwork side handled for them can print the printable sterilization log, run the sterilization self-check, or talk to a sterilization compliance specialist. Buying for a multi-site group? Wholesale ordering covers case and pallet volumes, and the BI 5-pack trial (CA $12.99, shipping included) is the low-commitment way to test monitoring consumables first. Reselling? become a distributor.
Related Reading
- Gloves collection
- AdvanceCare nitrile gloves in Canada: INTCO's exam-grade value line explained
- AQL explained: medical glove quality standards for buyers
- INTCO nitrile gloves wholesale case
Frequently Asked Questions
Which manufacturer makes CliniEco nitrile gloves?
CliniEco supplies examination-grade nitrile gloves manufactured by INTCO, packed as ten boxes of 100 per wholesale case for Canadian clinics.
What AQL should an examination glove have?
An AQL of 1.5 for pinholes is a common examination-glove target, with a 2.5 AQL for major physical defects. Lower numbers mean tighter acceptance on each lot.
What is the difference between 4 mil and 6 mil nitrile gloves?
A 4 mil glove is thinner with better feel for patient contact, while a 6 mil glove is heavier and more durable for cleaning and maintenance work.
Do nitrile gloves need a medical device establishment licence in Canada?
Medical devices sold in Canada are supplied through an establishment that holds an MDEL. CliniEco Medical operates under MDEL #35334 as a licensed medical device establishment.
Last updated: October 2026. CliniEco Medical is a licensed medical device establishment (MDEL #35334).
0 commentaire