Four layers, four documents: which standard answers which question
A clinic pack is covered by a registration and label layer, a test method layer, a provincial practice layer and a records layer. Confusing them is the most common buying error.
Four different layers of requirement sit behind a hand sanitizer pack, and clinic buyers routinely fold them into one question: which standard does this bottle meet? The answer is that no single standard covers the bottle, the pack, the dispenser and the way the product is used in the room. Each layer is answered by a different document, held by a different party, and checked at a different moment.
This page separates the layers for a Canadian clinic buying a 12 × 60 ml clinic pack, or the ten-pack of the same bottle, or a 1,200 ml bag-in-box refill, and names what each layer settles — and what it deliberately leaves open.



Which standards apply to the product and its label?
The product layer is federal and it is settled before the clinic orders. An antiseptic hand rub is registered as a natural health product, which is why the unit carries an NPN rather than a DIN, and the registration is held by the seller whose name is on the label. The monograph that antiseptic skin cleansers are registered against sets the allowed strength: ethanol at 60 to 80% (v/v), or isopropanol at 60 to 75% (v/v). A product outside those bands is a different regulatory conversation, not a stronger version of the same one.
The label is part of the same layer, and it has two parts a clinic can check without documentation. The medicinal ingredient statement must name the alcohol and its strength — 70% ethyl alcohol (v/v) on the 60 ml bottle, 75% ethanol (v/v) on the foam refill — and the label information for this class is required in both English and French, not one language with a translation added later.
Which test method would a buyer ask for, and what does it actually measure?
Three test methods appear on hand hygiene submissions, and they are not interchangeable. Two are American Society for Testing and Materials methods; one is European. A clinic does not run any of them, but knowing which one a supplier’s claim rests on is the difference between a defensible answer and a marketing sentence.
| Document | What it measures | How the test is set up | What a clinic can conclude |
|---|---|---|---|
| ASTM E1174 | Healthcare personnel handwash — a wash-off product applied to contaminated hands | Repeated contamination and product application cycles on volunteer hands | That a handwash format was evaluated on healthcare workers; not a statement about a leave-on rub |
| ASTM E2755 | A hand sanitizer applied to dry hands, without water | Low-volume contamination of dry hands, product applied as it would be in use | The closest of the three to what happens at a clinic door: a rub on dry hands |
| EN 1500 | Hygienic handrub, European method | Test product at 3 ml for 30 s, compared against a reference of 2 × 3 ml of 60% (v/v) propan-2-ol for 60 s | A comparative result against a defined reference alcohol, which is why the reference is always quoted with the claim |
| Antiseptic skin cleanser monograph | The strength and permitted claims for a registered product | Registration review rather than a bench test | That 70% ethyl alcohol is inside the ethanol band, not that a given pack size or dispenser is suitable |
Which standard applies to how the product is used in the clinic?
None at the federal level, and this is the layer that surprises buyers. Canada does not have a single national standard for hand hygiene practice in a clinic. What exists is provincial best practice guidance — Public Health Ontario publishes a hand hygiene best practice document for health care settings, and Quebec works from guidance issued through its own infection prevention structures — plus each facility’s written policy. The practical requirement a clinic is measured against is usually its own procedure, and the provincial document is what that procedure should be built from.
The consequence for a purchase is direct. A pack format is never the thing a standard requires; a place is. The guidance talks about product being available at the point of care, and the clinic then decides whether that means a bottle per room, a dispenser per corridor, or both. Any supplier claiming that a particular pack size is “the compliant one” is describing a house preference as a rule.
What does no standard cover, and why does that matter for a pack decision?
Pack configuration, dispenser compatibility and refill intervals are commercial decisions. No document in the four layers above sets how many millilitres a station should hold, how often a bag should be changed, or what the station card should say. That silence is why the same clinic can be fully compliant with twelve bottles and fully compliant with eight bottles and four dispensers.
It is also why the record is worth more than the argument. When a reviewer asks how the clinic knows product was available at the point of care, the answer is a refill log with dates, stations and lot numbers, not a citation. The printable compliance log is built for that record; the bulk buying guide covers the quantities that go into it.
Where does a clinic take this next?
Three things a clinic can act on rather than read: the clinic supply planner that turns room count and hand-hygiene events into a monthly bottle count; the printable compliance log that records when a station was refilled, by whom, and from which lot; and, for a multi-site or purchasing-group enquiry, the wholesale account route, where case quantities and delivery frequency are set once rather than per order. Reselling? become a distributor.
Related Reading
- Hand sanitizer alcohol concentration: what Canadian guidance specifies
- NPN vs DIN: Canadian disinfectant and sanitizer numbers explained
- Hand sanitizer for dental and medical clinics: alcohol vs quat vs CHG
Frequently Asked Questions
Is there a Canadian standard specifically for hand sanitizer clinic packs?
No. Standards attach to the product (registration and label, plus in-vivo test methods) and to practice (provincial best practice guidance), not to a pack configuration. Pack size, dispenser compatibility and refill interval are left to the facility, which is why two clinics with different formats can both be in order.
Does ASTM E1174 apply to a hand sanitizer?
E1174 is the healthcare personnel handwash method, built around a wash-off product and repeated contamination cycles. A leave-on rub is better described by ASTM E2755, which applies product to dry, lightly contaminated hands. A supplier citing E1174 for a rub is quoting a test designed for a different product type.
What does the reference product in EN 1500 have to do with my clinic?
Nothing directly — but it explains the claim. EN 1500 reports a test product against a reference of 2 × 3 ml of 60% (v/v) propan-2-ol for 60 s, with the test product applied at 3 ml for 30 s. A result without the reference named is not a comparable result, so ask for the reference when a claim is quoted.
Does the 70% figure on the bottle come from a standard?
The strength has to fall inside the band the antiseptic skin cleanser monograph allows, which is 60 to 80% (v/v) for ethanol and 60 to 75% (v/v) for isopropanol. 70% ethyl alcohol sits inside the ethanol band. That is a registration question, separate from whether the product was tested to E2755 or EN 1500.
CliniEco Medical holds Health Canada MDEL #35334. Alcohol limits are those of the antiseptic skin cleansers monograph; test-method descriptions follow the published ASTM and EN 1500 scopes. Confirm current specifications on the product page. This page is general information about product formats and record-keeping, not clinical advice. Confirm current specifications and order status on the product page. Health Canada MDEL #35334 covers our establishment licence; it is not a statement about any individual product.